Posiflex | SD-676 | User manual | Posiflex SD-676 User Manual

Posiflex SD-676 User Manual
SD-676
Side Attachment
User Manual
Package Contents



SD-676 Side Attachment
User Manual
2 iButton Keys
(if the iButton reader is built in)
Features
 2-in-1 (MSR + iButton Reader) side attachment for Posiflex 15”/17” KS
series terminals
 Bi-directional swipe
 3-track support
 Supporting ISO 7811 magnetic card
 Interface: USB
Views of the Side Attachment
Front View
Rear View
iButton Reader
Mounting Screw Holes
3-track Magnetic Stripe Reader
19850905010 Ver. A0
http://www.posiflex.com
1
Hardware Installation
During Installation of the SD-676, do NOT power ON your terminal and
monitor.
Installation of SD-676 onto the 15”/17” KS Series Terminals
Start to install SD-676 onto the terminal according to the following steps.
1.
Loosen and remove the two fixing screws
from the side mount cover on the back of
the right side of the terminal.
2.
Remove the side mount cover from the back
of the right side of the terminal.
3.
Insert the USB I/O cable connected from
the main board of the terminal into the cable
connector of the side attachment.
4.
Determine that the USB I/O cable is
securely connected to the cable connector of
the side attachment.
2
Cover
5.
Manage the USB I/O cable well, as shown
in the right figure.
6.
Align the two mounting screw holes of the
SD-676 side attachment with the two screw
holes on the terminal.
7.
Fix the SD-676 side attachment onto the
terminal by locking the two screws shipped
with the package.
8.
The installation of SD-676 side attachment
onto the terminal is completed, as shown in
the right figure.
3
Driver Installation and Utility Outline
Before installing the drivers of the SD-676 side attachment, after installing the
SD-676 side attachment hardware, power on your KS-series terminal.
Installing the Posiflex USB MSR Manager
After you finish installing the side attachment onto the KS-series terminal,
to allow you to easily do settings of the attachment, please install the
Posiflex USB MSR Manager. To download the Posiflex USB MSR
Manager, go to the Posiflex’ global website: http://www.posiflex.com/englobal/Download/download to download the up-to-date utility.
After downloading tool, follow the step-by-step instructive messages to
complete the manager installation. After completion of the manager
installation, restart your terminal.
Next, left click Start  Programs  Posiflex Tools  Posiflex USB
MSR Manager to open the MSR manager.
※ If you purchase the MSR model of which the interface is KB wedge,
ignore the following steps.
Then, the Posiflex USB MSR Manager appears . If you purchase the MSR
model of which the interface is virtual COM, tick off on virtual COM port
interface and tap Save & Exit to exit from the manager.
If you select virtual COM port interface, go to the Posiflex’ global website
to download the virtual COM driver and install it. follow the step-by-step
instructive messages to complete the driver installation. After completion of
the driver installation, restart your terminal.
4
Installing the iButton Setup Tool
If you purchase the iButton model of which the interface is Virtual COM,
install the I-Button Virtual COM Driver before installing the iButton
Setup Tool.
To download the I-Button Virtual COM Driver and the iButton Setup Tool,
go to the Posiflex’ global website: http://www.posiflex.com/englobal/Download/download to download the up-to-date driver and utility.
※ If you purchase the iButton model of which the interface is KB wedge,
ignore the driver installation and just install the iButton Setup Tool.
After downloading driver and tool, follow the step-by-step instructive
messages to complete the installation. After completion of the installation,
restart your terminal.
To avoid users doing settings by mistake, it is suggested that professional
technicians implement the setup. To do more advanced settings on the side
attachment, contact directly the Posiflex’ technical service team.
Operating the SD-676
After installing the drivers and tools and setting up SD-676, you can start to
operate the side attachment.
Magnetic Stripe Reader (MSR)
1. Keep the magnetic stripe of the card facing the arrow
head circled in the picture.
2. Move the magnetic stripe card along the track of the
reader from top to bottom or from bottom to top in the
direction of the arrow.
5
or
iButton Reader (Optional)
1. Aim a magnetic iButton key at the reading
area of magnetic iButton reader and keep
the key close to the reader until the
magnetic iButton key is absorbed by the
magnetic iButton reader.
iButton Reader
iButton Key
2. When the magnetic iButton key is
completely absorbed by the magnetic
iButton reader, the iButton reader can read
the ID data written in the iButton key and
sends the ID data to its connected KS-series
POS terminal.
※ The product information and specifications are subject to change without
prior notice. To get the detailed information on SD-676, please check this
model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).
6
<MEMO>
7
<MEMO>
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising