Posiflex | HC-1521IR/HC-1521IR-Pro/HC- 1521P/ HC-1521P-Pro | User manual | Posiflex HC-1521IR/HC-1521IR-Pro/HC- 1521P/ HC-1521P-Pro User Manual

Posiflex HC-1521IR/HC-1521IR-Pro/HC- 1521P/ HC-1521P-Pro User Manual
HC-1521IR/1521IR-Pro/1521P/1521P-Pro
Infotainment Terminal
User Manual
HC-1521P/1521P-Pro
HC-1521IR/1521IR-Pro
Package Contents
HC-1521 series terminal………………………………………x1
Power adaptor............................................................................x1
Power cord…………………………………………………….x1
I/O cable cover (including 2 screws)………………………….x1
User manual...............................................................................x1
Recovery DVD………………………………………………...x1
Views of the HC-1521 Series
Front View of HC-1521IR/1521IR-Pro
1
1.
2.
3.
4.
5.
6.
7.
15630900020 Ver. A0
http://www.posiflex.com
1
3
2
4 56
7
Volume down
Volume up
Backlight brightness down
Backlight brightness up
Power LED
Power button
Light sensor
Front View of HC-1521P/1521P-Pro
Front facing camera
IR receiver
Light sensor
1
8.
9.
10.
11.
12.
13.
2D image scanner
(optional)
4 56
3
2
Volume down
Volume up
Backlight brightness down
Backlight brightness up
Power LED
Power button
Rear View of HC-1521 Series
Screws holes
for VESA mount (100 x 100 mm)
Heat dissipation holes
Speaker
Speaker
Cover
for MSR2
Cover
for handset1
Heat dissipation holes
Heat dissipation holes
I/O port cover
Note:
1.
2.
Handset is optional and reserved before shipped.
MSR is optional and reserved before shipped.
2
Bottom View of HC-1521 Series
Microphone1
USB2.0 port
Note: 1.
Audio combo jack
The microphone is provided for HC-1521P/1521P-Pro
ONLY.
Rear Bottom View of I/O Ports
5
4
3
2
1
6
7
8
1
12VDC-IN power jack
2
HDMI port
3
Serial (DB9) port
(COM1 ~ COM4)
4
USB3.0 port
5
USB2.0 port
6
RJ45 LAN port
7
VGA port
8
RJ45 LAN port
9
Coaxial connector
for cable TV tuner (optional)1
Note:
1.
9
The coaxial connector is provided for HC-1521P/1521P-Pro
ONLY.
3
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the
connector of power adapter and all of the connectors of required
I/O cables respectively to the 12VDC-IN power jack and
appropriate I/O ports. Please make sure that each of the cables is
fully connected to each of the correct ports. Damages due to
incorrect connection or orientation are not covered by product
warranty!
Some cable connectors like the connectors of the COM or LAN
cables have to be gently inserted until a click is heard. It is
recommended that the I/O ports, such as COM port and VGA
port, should be screwed after the I/O cable connectors are
completely connected. And please make sure that each connector
has to be connected to the right peripheral device in the right way.
CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head
itself instead of pulling the cable wire. Doing this
could damage the cables and ports, which is
considered as an artificial damage and is not
covered by the warranty.
Note: The COM ports of HC-1521 series do not supply power by
default. To make the COM ports supply power, you can set
up the COM ports through the dedicated settings listed in
the table below.
BIOS Setting
Jumper Setting
HC-1521 series
COM1/2/3/4
5VDC
12VDC
v
x
v
v
4
Installing Optional Peripheral Devices
Posiflex HC-1521 series can work with multiple optional
peripheral devices, such as MSR, headset and the like.
Before installing an optional peripheral device, make sure that the
system is powered off and the external power source is removed
from the terminal to prevent electric hazard! Failure to follow the
warning description will void the product warranty!
For the detailed instruction, refer to the user manual of each of
the optional peripheral devices.
Installing a Cable TV Tuner Dongle
(Optional for HC-1521P)
The cable TV tuner dongle is optional for HC-1521P/1521P-Pro
ONLY.
To install the cable TV tuner dongle in your HC-1521P/1521PPro terminal, refer to the step-by-step guidance of installation
made below.
1. Remove the I/O port
cover.
2.
3.
Loosen and remove 2
screws on the cable TV
tuner dongle cover. Then,
remove the cable TV
tuner dongle cover.
Determine to make the
USB connector of the
dongle be toward the
right side.
Rightward
5
4.
Make the connector of
coaxial cable extended
from the terminal connect
to the coaxial cable
connect of the cable TV
tuner dongle.
5.
Squeeze the coaxial cable
connected to the cable
TV tuner dongle into the
cable TV tuner dongle
compartment of the
terminal.
6.
Squeezed into the compartment
Make the male USB
connector of the dongle
connect to the female
connector of the USB
cable extended from the
terminal.
6
7.
Squeeze the USB cable
connected to the cable
TV tuner dongle into the
cable TV tuner dongle
compartment of the
terminal.
Squeezed into the compartment
8.
Determine that the cable
TV tuner dongle is well
mounted to the cable TV
tuner dongle
compartment of the
terminal.
9. Place back the cable TV
tuner dongle cover on the
compartment of the
terminal and fasten it
with 2 screws.
10. Place the I/O port cover
back for shielding the I/O
ports of the terminal.
To install the dongle driver and the TV software utility, please
refer to the quick installation guide of cable TV tuner dongle
(H830O).
7
Connecting Power Adapter and I/O Cables
Before connecting power adapter and I/O cables to the I/O ports
of the terminal, please route and arranging the cables. Here, refer
to the following step-by-step instruction of cable routing and
arrangement for the details.
1.
Remove the I/O port
cover.
2.
Connect the connector of
the power adapter to the
12VDC-IN power jack of
the terminal and I/O
cables to the I/O ports of
the terminal.
3.
Cable out
Cover the bottom I/O
interface and gather the
I/O cables to the cable
arrangement area, as
indicated by the arrow.
Mounting the HC-1521 Series on the Wall (Optional)
If you are a user of HC-1521IR/1521IR-Pro provided with a
scanner, you can mount the terminal on the wall by using the
optional wall mount kit, SK-300, while if you are a user of HC1521IR/1521IR-Pro without any scanner, you can mount the
terminal on the wall by using the optional wall mount bracket,
WB5000.
If you are a HC-1521P/1521P-Pro user, you can mount the
terminal on the wall by using the optional wall mount bracket,
WB5000.
8
For detailed installation description, please refer to the
installation guide of wall mount kit you purchase.
Powering ON the HC-1521 Series
To power on the HC-1521 series, just press the power button; to
power it off, press and hold the button for 3 seconds.
Enabling/Disabling the Buttons
By enabling and/or disabling the buttons, you can use the
functions of Auto Backlight Adjustment, Control Button Locking,
and Power Button Locking.
Auto Backlight Adjustment
In the default condition, the backlight of the HC-1521 series must
be adjusted manually.
To use the function of automatic backlight adjustment, refer to
the following instruction.
+
Press once the Backlight Brightness
Up and Backlight Brightness Down
buttons at the same time.
After the Backlight Brightness Up and Backlight Brightness
Down buttons are pressed once at the same time, the HC-1521
series will adjust its backlight automatically by detecting the
ambient light.
To disable the function of automatic backlight adjustment, press
once the Backlight Brightness Up or Backlight Brightness Down
buttons.
or
r
Press once the Backlight Brightness
Up or Backlight Brightness Down
buttons to disable the automatic
backlight adjustment.
9
Locking the 4 Control Buttons
In the default condition, the 4 control buttons -- Volume Down,
Volume Up, Backlight Brightness Up, and Backlight Brightness
Down -- are for users to control.
To lock the 4 control buttons, refer to the following instruction.
1
Press the Volume Up and Backlight
Brightness Up buttons sequentially
and then hold for 3 seconds.
2
To unlock the 4 control buttons, refer to the following instruction.
1
Press the Volume Down and
Backlight Brightness Down buttons
sequentially and then hold for 3
seconds.
2
Setting the Power Button to “ON ONLY”
In the default condition, the power button is for you to easily
power on or off the HC-1521 series. In order to avoid users from
pressing the power button by mistake to make the system shut
down accidently, you can make the system stay “always ON” by
locking the power button.
To lock the power button, refer to the following instruction.
1
Press the Volume Down, Volume Up,
and Backlight Brightness Up
buttons sequentially and then hold
for 3 seconds.
3
2
To unlock the power button, refer to the following instruction.
1
2
3
Press the Volume Down, Volume Up,
and Backlight Brightness Down
buttons sequentially and then hold
for 3 seconds.
10
Back to the Default Conditions
To make all of the buttons return to default conditions, refer to
the following instruction.
1
2
3
Press the Volume Up, Backlight
Brightness Down, and Backlight
Brightness Up buttons sequentially
and then hold for 3 seconds.
When you successfully make all of the buttons return to default
conditions, the 4 control buttons and the power button will be
unlocked and the automatic backlight must be adjusted manually.
Power LED Indicator
There is a power LED indicator on the front side of the HC-1521
series. After powering ON the terminal, you can read the terminal
operation status from the power status LED indicator. The LED
status is described below.
LED
POWER
Status
Solid blue
Solid orange
Description
Terminal ON
Power standby
Installing an Operating System
This product is highly professional equipment. Therefore, we do
NOT encourage you to install any operating system into this
machine without professional assistance. Posiflex Technology,
Inc. shall not be responsible for any technical support to
questions on this aspect. We suggest that you contact your dealer
for OS installation.
Operating System Recovery
For the HC-1521 series main terminal preloaded with an
operating system on HDD or SSD, Posiflex provides a recovery
DVD shipped with the main terminal for the preloaded operating
system. The system integrator shall take care of software
restoration after the OS is recovered.
11
If you plan to recover your operating system, we do NOT
encourage you to recover any operating system by yourself.
Please contact your service center for operating system recovery.
Operation Environment
This terminal must NOT be operated in an environment with
restricted ventilation. There must be at least 25 mm air clearance
around any top or side ventilation holes with free flow of air
around the unit at all times for system operation.
12
Specifications
HC-1521IR/1521IR-Pro
1521P/1521P-Pro
System Configuration
Processor
Memory
Storage
Power Supply
OS Support
Intel Haswell platform,
default Core i3 w/H81 chipset, Core i5 w/Q87 chipset (vPro
support)
2 x DDR3 SO-DIMM sockets (1333/1600 FSB)
1 x SATA / 1 x mSATA (SATA for 2.5" HDD or SSD)
12V/130W or 12V/150W
POSReady 7 (32bit/64bit) / WIN 7 (32bit/64bit) /
WIN 8.1 Industry (32bit/64bit) / WIN 10 IoT (32bit/64bit)
Display & Touch
LCD
Resolution
21.5" TFT LCD
1920 x 1080
Touch
IR touch
PCAP touch
I/O & Expansion
Serial Port
4 x serial port (4 x DB9)
USB Port
7 x USB port
(1 x USB2.0 at front bottom side / 4 x USB2.0 + 2 x USB3.0 at
rear bottom side)
LAN Port
2 x LAN (RJ-45) port
Display Port
1 x VGA port / 1 x HDMI port
Camera
Audio
N/A
2 x internal 3watt speaker /1 x audio combo jack
Microphone
Power
N/A
Hotkeys
Integrated MIC
DC-in jack
Antenna
Expansion Slot
Front facing, 5MP , auto focus
N/A
1 x Coaxial connector
1 x mini-PCIe slot
1. Volume up + down
2. Brightness up + down
3. Power on/off
Light Sensor
N/A
Yes, located on front bezel
Wireless
WIFI + BT via mini-PCIe slot (optional)
Indicator
Power LED indicator (power on/Standby)
Intel AMT Support
Yes
13
HC-1521IR/1521IR-Pro
1521P/1521P-Pro
Mechanism
1. VESA 100 mounting
2. Designed with two I/O panels, one on the rear of the terminal
and the other one on the bottom of the terminal
Certification
CE/FCC
Environmental
Operating
Condition
0°C - 40°C, 20%RH - 90%RH (equipped with HDD);
0°C - 50°C, 20%RH - 90%RH (equipped with SSD)
Storage
Condition
-20°C - 70°C, 10%RH - 90%RH
Options
Attachment
SA-105 (MSR) / SA-305 (MSR + SC reader +fingerprint reader)
2D Scanner
Externally attached to HC1521IR at the bottom of the
terminal (via WB5000 and SK300)
Cable TV Tuner
Handset
N/A
Integrated module for option
USB dongle & remote control
Yes
※ The product information and specifications are subject to change without
prior notice. To get the detailed information on HC-1521 series, please
check this model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).
14
< MEMO >
15
< MEMO >
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising