Posiflex | XT-3815/XT-3915/XT-3915IR | User manual | Posiflex XT-3815/XT-3915/XT-3915IR User Manual

Posiflex XT-3815/XT-3915/XT-3915IR User Manual
XT-3815/3915/3915IR
Fanless LCD Touch Terminal
User Manual
Package Contents






Terminal with base stand………x1
60W power adaptor……………x1
Power cord……………………..x1
Screw for IO cable cover………x2
User manual……………………x1
Recovery or information CD......x1
Product Features
Standard Features
System
 Intel Bay Trail-D J1900 2.0G up to 2.42G, 2M Cache, 4 core
Mechanical Structure
 Fanless structure with Aluminum die-cast main unit casing
 Water resistant structure allowing easy cleaning
 Foldable base
Display
 High-quality 15” TFT active matrix LCD monitor provided
with true-flat Projected Capacitive touch panel supporting
10-point multi-touch for 3815, with resistive touch panel for
XT-3915, and with Infrared touch panel for XT-3915IR
16780900040 Ver. C0
http://www.posiflex.com
1
Optional Items
System
 DDR3L SODIMM memory expansions up to 8GB (Max.) for
XT-3815/3915/3915IR (J1900) in one SODIMM
 Preload Windows POSReady 7 / Win 7 / Windows Embedded
8.1 Industry / Linux per request
WIFI
 Wireless LAN module, through Mini PCI-E Interface
Connection Cable
 Parallel extension cable
 RJ50-to-DB9 serial port conversion cable
 Split cable for 2 cash drawer control
Base
 GEN 8E base including UPS battery and poweredUSB board,
and supporting 60W/80W/150W power adaptor
Integration Kit
 Integrated side mount upgrade kits, such as SA-105 provided
with optional MSR, SA-205 provided with iButton, SA-305,
and SA-405
 1” SATA SSD
 PoweredUSB kit in GEN 8E base stand, such as PU-480 or
PU-490
 Power adapter kits for 80W/150W power adapters
 Back mount displays, such as LM/TM-3010/3014 and PD6307
2
Views of the XT-3815/3915/3915IR
Front and Rear Views of Terminal with Gen 7E Base Stand
HDD Cover
LCD Touch Panel
Hinge
for main unit
Power Indicator
Neck Cover
Cable Cover
Base Stand
Cable Exit
DDR3 Memory Cover
Left Side View of Terminal with Gen 7E Base Stand
Power Button
Brightness Adjustment
Button “+”
Brightness Adjustment
Button “-”
USB 2.0 Port
Locking Hook
Bottom View of Terminal with GEN 7E Base Stand
Bottom Plate
Rubber Cushion
Wrapping Screw
3
Front and Rear Views of Terminal with GEN 8E Base Stand
HDD Cover
LCD Touch Panel
Hinge
for main unit
Cable Cover
Cable Exit
Power Indicator
Neck Cover
Base Stand
DDR3 Memory Cover
Left Side View of Terminal with GEN 8E Base Stand
Power Button
Brightness Adjustment
Button “+”
Brightness Adjustment
Button “-”
USB 2.0 Port
Locking Hook
Bottom View of Terminal with GEN 8E Base Stand
UPS Chamber
Bottom Plate
Power Adaptor Chamber
PoweredUSB Board Cover
Rubber Cushion
Wrapping Screw
4
Views of I/O Interfaces of Terminal
1
2
3
4
5
6
7
8
1 DC-IN Power Jack
6 VGA Port
2 UPS Port
7 LAN Port
3 CR Port
8 USB 2.0 Port
4 DB9 COM Port
9 USB 2.0 Port
5 RJ50 COM Port
10 USB 3.0 Port
9
10
Installing Power Adapter Kit onto GEN 8E Base Stand
The power adapter kit is optional and, before shipping, is
installed onto the optional GEN 8E base stand. Upon your needs,
you can purchase and install the kit for 80W or 150W power
adapter. The introduction to the kit and the brief description of
installation of the kit are made below.
For the detailed description of installation of the 80W/150W
power adapter kit, refer to the XT-3815/3915/3915IR technical
manual.
Secure the Power Cord
To avoid the power cord from being pulled out
accidentally, the power adapter kits are shipped
with a power cord bracket.
After installing the power adapter kit and connecting the power
cord to the power adapter, remember to use the power cord
bracket to secure the power cord.
Fixing with screw
5
Connecting Power Cable Connector to the Terminal
Before turning turn ON the terminal, connect the power cable
connector to the power jack of the terminal.
CAUTION:
Before connecting the power cable to the power jack of
main unit, do NOT touch any metal pin of the connectors
or circuits to avoid high voltage hazard or electrostatic
discharge damage.
Powering ON the XT-3815/3915/3915IR
After connecting the power cable to the
power jack of main unit, slightly push to
open the power button cover at the left
side of the main unit.
Then press the power button to power on
the main unit. To power it off, press the
button again.
Once powering off the system, if you want
to power it on again, please wait for at
least 3 seconds.
If the system hangs due to a reason, such as software resource
conflict, please press and hold the power button for 10 seconds
around to forcedly shut down the system.
6
Power Indicator
There is a power LED indicator serving for
several purposes located at the center of lower
rim of LCD panel. The relationship between the indicator status and
other conditions is summarized below:
Indicator Status
System Status
Off
Off
Green
Blue
Blue/Flash
Green/Rapid Flash
Off
Off
Off
On
On
On
External
Power
Off
Off
On
On
Off
Off
UPS Battery
Powering Up
Not present
Present
No influence
No influence
Activated
Battery low
Not possible
Not allowed
Allowed
N/A
Installing an Operating System
This product is highly professional equipment. Therefore, we do
NOT encourage you to install any operating system into this
machine. Posiflex Technology, Inc. shall not be responsible for any
technical support to questions on this aspect. We suggest that you
contact your dealer for OS installation.
7
Specifications
CPU
Memory
OS
Display
Storage
Ethernet
WLAN
Power
Supply
Serial port
Parallel port
CR Port
USB Port
PS/2 KB
Port
Audio
Extension
slot
Power-Off
Control
Power
Switch
Power-ON
Wake-Up
Mechanical
installation
Power LED
Indicator
Temp &
Humidity
XT-3815/3915/3915IR
Intel Bay Trail-D J1900 2.0G up to 2.42G, 2M Cache, 4 core
DDR3L 1333 FSB, SO-DIMM socket *1, 8G (Max.)
POSReady 7 / Win 7 / Windows Embedded 8.1 Industry / Linux per
request
XT-3815:
15-inch TFT LCD monitor (1024x768) with true-flat pc touch panel
XT-3915:
15-inch TFT LCD monitor (1024x768) with resistive touch panel
XT-3915IR:
15-inch TFT LCD monitor (1024x768) with infrared touch panel
SATA storage x 2 (one for 2.5” HDD/SSD and the other for 1” SSD
only), or optional eMMC module x 1
10/100/1000 Mb x 1 port
Optional, through mini PCI-E interface
12 VDC power adaptor, 60W / optional UPS battery (2300mAh/12V)
RJ-45 X 1, DB9 X 3, RJ-50-to-DB9 cable (Optional)
proprietary port connector in jumper setting window
(by specially optional conversion cable)
1 port, available for controlling 2 CR.
Standard, 6 ports on the I/O plate (USB 2.0 X 5, USB3.0 X 1), 1 port on
the left side (USB2.0), 3 USB headers reserved for internal USB device
use
Pin header on back window
Built-in 2W audio speaker
Mini PCI-E slot, with USB signal
Hardware button or by software control
Soft switch
Through alarm or LAN
Desktop or wall mount
Power ON/ standby, bi-color LED indicators
Operation Temp.: 0 to 40 ℃ / Storage Temp.: 20 to 85℃
Humidity: 10 to 90 %; 5 to 90 % (operation condition)
※ The product information and specification are subject to change without prior notice.
To get the detailed information on XT-3815/3915/3915IR, please check this model from
Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising