Posiflex | PD-340R \ PD-350R | User manual | Posiflex PD-340R \ PD-350R User Manual

Posiflex PD-340R \ PD-350R User Manual
PD-340R/350R
Customer Display
User Manual
Package Contents


PD-340R/350R
User Manual x1
Views of the PD-340R
Front View
Rear View
Views of the PD-350R
Front View
Rear View
19430907010 Ver. Original
http://www.posiflex.com
1
Hardware Installation
PD-340R Installation
During Installation of the PD-340R, please do NOT power ON your terminal.
Installation of PD-340R Customer Display
Start to install PD-340R according to the following steps.
1.
Hold the PD unit and then turn the screen
facing toward you.
2.
Locate the 4 mounting holes on the rear
panel of HS series system.
3.
Please align the 4 PD bracket holes with the
4 screw mounting holes on the back cover
of HS main unit and fasten them to mount
the PD onto the back of HS main unit.
4.
Connect RS-232 end of the PD cable to the
RS-232 port on the main unit.
2
PD-350R Installation
During Installation of the PD-350R, please do NOT power ON your terminal.
Installation of PD-350R Customer Display
Start to install PD-350R according to the following steps.
1.
Hold the PD unit and then turn the screen
facing toward you.
2.
Locate 2 upper holes of 4 mounting holes
on the rear panel of the XT-series system.
3.
Please align the 2 PD bracket holes with the
2 screw mounting holes on the back cover
of XT main unit and fasten them to mount
the PD onto the back of XT main unit.
4.
Connect RS-232 end of the PD cable to the
RS-232 port on the main unit.
3
FOR OPOS APPLICATION:
Find the subfolder \Drivers\UPOS\OPOS of the Posiflex Product Information
CD or DVD or download it from web site:
http://www.posiflex.com.tw/Download%20list.asp?Status=1&Series_Name=U
POS&Model_Name=OPOS and execute the file “SETUP.EXE” to install the
OPOS Control Manager. To add the customer display under OPOS control
please set in OPOS Control Manager device name “PD3x-Line Display” in the
top row. For RS-232 models, select the COM port in the 3rd row and set baud
rate to “9600” in 4th row as illustrated.
APPLICABLE COMMANDS (FOR PD-340R/350R)
For PD-340R/350R, it is always the Epson command mode at power on. It can
enter or exit the PST command mode through software command.
EPSON COMMAND MODE (POWER ON DEFAULT):
NAME HEX CODES FUNCTION
BS
<08>
Move Cursor Left
HT
<09>
Move Cursor Right
LF
<0A>
Move Cursor Down
HOM <0B>
Move Cursor To Home Position
CLR
<0C>
Clear Display Screen
CR
<0D>
Move Cursor To Left Most Position
CAN <18>
Clear Cursor Line
Select Peripheral Device / Command Mode
n=1 pass through (should not be used)
ESC = <1B><3D><n>
n=2, 3 (not required)
n=4 switch to PST command mode
ESC @ <1B><40>
Initialize Display
4
NAME
HEX CODES FUNCTION
Disable / Enable Euro Dollar Sign
ESC t <1B><74><n>
n = 0, 19
US MD1 <1F><01>
Specify Overwrite Mode
US MD2 <1F><02>
Specify Vertical Scroll Mode
US MD3 <1F><03>
Specify Horizontal Scroll Mode
US LF <1F><0A>
Move Cursor Up
US CR <1F><0D>
Move Cursor To Right Most Position
Move Cursor To Specified Position
<1F><24><n><
US $
n = 1 ~ 20
m>
m = 1, 2
US @ <1F><40>
Show Version
US B <1F><42>
Move Cursor To Bottom Position
US C <1F><43><n> Cursor On / Off, n = 1, 0
Blink Display Screen
US E <1F><45><n>
n = 0 ~ 255
PST COMMAND MODE:
HEX CODES
FUNCTION
<01>
Set Pass Through Flag (should not be used)
<06> <N1> <N2>
Change Leading Code
<14> <01>
Wraparound Mode (Default)
<14> <02>
Vertical Scroll Mode
<14> <03>
Insert Mode
<14> <04>
Overwrite Mode (Default)
<14> <08>
Back Space
<14> <09>
Move Cursor Right
<14> <0A>
Move Cursor Down
<14> <0B>
Move Cursor Left
<14> <0C>
Delete Character
<14> <0D>
Move Cursor To Left Most Position
<14> <0E>
Clear Display
<14> <10>
Clear Line 1
<14> <11>
Clear Line 2
<14> <12>
Cursor Block Mode
<14> <13>
Cursor Under Line Mode
<14> <15> <02>
Clear Pass Through Flag
<14> <16>
Switch To Epson Mode
<14> <17>
Cursor On
5
HEX CODES
FUNCTION
<14> <18>
Cursor Off
<14> <19>
Reset
<14> <1A> <P>
Move Cursor To Position P (P=0~13,14~27h)
<14> <1B>
Move Cursor To Rightmost Position Of Line 1
<14> <1C>
Move Cursor To Rightmost Position Of Line 2
The Euro Dollar Sign is designated at code <D5>h.
※ To get the detailed information on PD-340R/350R, please check this
model from Posiflex Global Website (http://www.posiflex.com/englobal/Download/download).
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising