Groen | DL | Spec sheet | Groen DL Spec Sheet

Groen DL Spec Sheet
PROJECT NAME:
LOCATION:
COOKER/MIXERS
ITEM NO:
FLOOR MOUNTED INCLINED AGITATOR DIRECT STEAM MODEL DL
Cooker Mixer Kettle shall be a Groen Model DL-40, 60, 80, INA/2 (Specify 40-, 60- or 80- gallon) stainless
steel, self-contained, 2/3 steam jacketed unit operated from a direct steam source and complete with console
mounted tilt-out inclined agitator mixer.
QTY:
MODEL NO:
AIA NO:
SIS NO:
AVAILABLE MODELS:
ASME CODE: Unit shall be ASME shop-
CONSTRUCTION: Kettle interior shall be 316
SANITATION: Unit shall be designed and
DL-40 INA/2 (40 GALLON)
DL-60 INA/2 (60 GALLON)
DL-80 INA/2 (80 GALLON)
stainless steel, solid one-piece welded construction.
Kettle jacket shall be 304 stainless steel solid onepiece construction. Unit provided with a heavy-duty
reinforced rim with a welded-in butterfly-shaped pouring
lip for maximum sanitation and durability. Unit includes
10-gallon etch markings, double pantry faucet and
steam regulating system. Kettle to be tilting type with a
positive locking worm and gear tilt mechanism enclosed
in a polished, drip-proof stainless steel housing. Kettle
mounted on a polished, stainless steel tri-leg stand with
stainless steel floor flanges.
AGITATOR ASSEMBLY: Agitator assembly to be
designed to thoroughly fold and blend with gentle lifting
action provided by the agitator, entering kettle body at
an angle. Inclined agitator to be stainless steel tubular
frame, complete with finger-type or shovel-type scrapers.
Agitator to be readily removable for ease of cleaning and
maximum sanitation. Unit driven by a gear motor through
an electronic variable-speed control. Motor is completely
enclosed-type with a cast iron housing, helical bevel
gearing and right angle shaft down. Motor drive is
mounted on a stainless steel channel that manually
hinges out to the back of kettle. Unit to be equipped
with a spring assist for agitator tilt-out. A positive quickacting lock and latch mechanism to be provided to
secure the agitator when it is in the kettle.
FINISH: Kettle interior shall be polished to a 180
emery grit finish. Kettle exterior shall be finished to a
bright semi-deluxe buff finish, ensuring maximum ease
in cleaning and maintaining brilliant appearance.
inspected, stamped and registered with the National
Board for operation up to a maximum working
pressure of 50 PSIG.
Stainless Steel 2/3 Steam Jacketed
Cooker/Mixer, Floor Mounted, Tilting,
Direct Steam, 40, 60 or 80-Gallon
Capacities With Inclined Agitator.
(Model DL-60, INA/2 shown).
constructed to be NSF listed meeting NSF
requirements.
DRAWOFF: Bottom outlet to be 2” flush-mounted,
sanitary quick opening ball valve.
STEAM PRESSURE: Kettle shall operate
dependably at any steam pressure of 50 PSIG or
below (to a minimum of 5 PSIG). Higher working
pressure available. The steam supply shall be injected
directly into the jacket through the trunnion, and
the condensate shall be removed through a tube
contained in the jacket and connected to the opposite
trunnion. No exposed steam piping or obstructions
shall be on the kettle body.
CONTROLS: Agitator to be electronic, variable
speed control-type capable of operating at any
RPM between minimum and maximum settings.
INSTALLATION: 3/4“ NPT steam inlet and
condensate connection are provided. A remote steam
source is required. A steam trap assembly with
check valve and globe valve is provided as standard.
Unit requires agitator power connection, specify 208
Volt, (1 or 3-phase is standard). Other voltages are
available.
OPTIONS/ACCESSORIES:
240, 480 Volt Power Supply
(For agitator motor)
Kettle Brush Kit
Pan Carrier
Wall Mount With In Wall Carrier
Gallon Master
Basket Insert
Cold Water Cooling
Working Pressure (higher or
lower than 50 PSIG)
Lip strainers
Contour measuring strips
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
Cooker/Mixers
143943 RevD
Revised 10/18
FAX (601) 373-9587
info@groen.com
Jackson, MS 39272
difoodservice.com
DL
P/N 142760 REV A
TABLE OF DIMENSIONS
NOTES:
D-60 INA/2
MODEL
(DIM) ARE IN MM.
STEAM PIPING SHOWN ON PRINT
ARE FOR REFERENCE ONLY. UNIT
WILL BE SHIPPED WITHOUT PIPING INSTALLED.
SERVICE CONNECTIONS:
1: STEAM INLET 3/4" NPT
2: STEAM OUTLET 3/4" NPT
PLAN VIEW 1=2
3: ELECTRICAL CONNECTION: (AGITATOR SUPPLY)
1-1/8" DIA. HOLE
(REF. 3/4" CONDUIT KNOCKOUT)
208/60/1PH
5.1 FULL LOAD AMPS
ELEVATION 1=2
4. ALL PIPING TO BE INSTALLED BY PURCHASER.
5. COLD & HOT WATER SUPPLY.
WALL
D-40 INA/2
CAPACITY
D-80 INA/2
60 GAL.
80 GAL.
DIM.
INCH
MM
INCH
MM
INCH
MM
A
26
660
30
762
34
864
B
22
559
25
635
27
686
C
38
965
41
1041
43
1092
D
25-1/2
648
26-1/2
673
27-1/2
699
E
12-1/2
318
11-1/2
292
10-1/2
267
F
9-1/2
241
8
203
7
178
G
56-1/2
1435
59-1/2
1511
61-1/2
1562
H
69
1753
72
1829
74
1880
48-15/16
J
45-1/16
1145
K
20
508
L
17-1/16
433
18-15/16
481
20-13/16
529
M
18-5/8
473
20-5/8
524
22-5/8
575
N
22-3/8
568
24-3/8
619
26-3/8
670
P
41
1041
45
102
49
1245
Q
15-3/8
391
17-3/8
441
19-3/8
492
R
30-3/4
781
34-3/4
883
38-3/4
984
S
12-1/2
318
14-3/4
375
16-3/4
425
T
38
965
40
1016
46
1168
1243
22
52-13/16
559
24
670
615
APPROX. WEIGHT
30.00 BACK CLERANCE
FOR TILTING
D-60 INA/2
40 GAL.
1341
610
740
R
3
Q
AGITATOR MOTOR DATA SPECIFICATIONS
H.P.
RPM MAIN
RPM SECONDARY
1
5
2
40
GAL
MAXIMUM
1-1/2
54
150
5A
4.55 A
2.28 A
MINIMUM
3/4
27
75
6.3 A
5.7 A
2.83 A
60
GAL
MAXIMUM
2
46
120
6.8 A
6A
3A
MINIMUM
1
23
60
4.7 A
4A
2A
80
GAL
MAXIMUM
2
46
120
6.8 A
6A
3A
MINIMUM
1
23
60
4.7 A
4A
2A
K
5
ELEC. LOAD RATING
208V 3PH 240V 3PH
480V 3PH
A
M
N
VARIABLE SPEED
2 HP DRIVE
P
H
G
B
C
3
10.84
(275)
FLOOR
F
S
62.38
T
ÿ.56
ÿ.56
CL
2.00
142760 REV. A
2.66
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising