Groen | DL | Spec sheet | Groen DL Spec Sheet

Groen DL Spec Sheet
PROJECT NAME:
LOCATION:
COOKER/MIXERS
ITEM NO:
FLOOR MOUNTED TWIN SHAFT AGITATOR DIRECT STEAM MODEL DL
Cooker Mixer Kettle shall be a Groen Model DL-40, 60, 80, TA/3 (Specify 40-, 60- or 80- gallon) stainless steel
2/3 steam jacketed unit operating from a direct steam source and complete with console-mounted tilt-out twin
shaft scraper mixer.
QTY:
MODEL NO:
AIA NO:
SIS NO:
AVAILABLE MODELS:
ASME CODE: Unit shall be ASME shop-
CONSTRUCTION: Kettle interior shall be 316
SANITATION: Unit shall be designed and
DL-40 TA/3 (40 GALLON)
DL-60 TA/3 (60 GALLON)
DL-80 TA/3 (80 GALLON)
stainless steel, solid one-piece welded construction.
Kettle jacket shall be 304 stainless steel solid one piece
construction. Unit shall be provided with a heavy-duty
reinforced rim with a heavy-duty butterfly-shaped
pouring lip for maximum sanitation and durability. Unit
includes 10-gallon etch markings, double pantry faucet
and steam regulating system. Kettle to be tilting type
with a positive locking worm and gear tilt mechanism
enclosed in a polished, drip-proof stainless steel housing.
Kettle mounted on a polished, stainless steel tri-leg
stand with stainless steel floor flanges.
AGITATOR ASSEMBLY: Enclosed power transfer
case to be cast aluminum with a 3-to-1 gear ratio. Gear
motor to be completely enclosed type, cast iron housing,
right angle shaft down, helical bevel gearing, variable
speed motor driven through a variable electronic speed
control. See table on back for minimum and maximum
agitator speeds. Main agitator to be anchor-type, shaped
to the contour of the kettle and provided with removable
nylon finger scrapers. The secondary counter rotating
agitator to be centrally located between the center shaft
and the outside arms of the main agitator. Both agitators
are attached with bayonet connections for easy, quick
removal for cleaning or when kettle is to be used as a
without the mixing mechanism. Both agitators are 304
stainless steel and either can be used alone. Agitator
assembly and motor drive can be manually tilted out to
the back of the kettle.
FINISH: Kettle interior shall be polished to a 180
emery grit finish. Kettle exterior shall be finished to a
bright semi-deluxe buff finish to ensure maximum ease
in cleaning and maintaining brilliant appearance.
inspected, stamped and registered with the National
Board for operation up to a maximum working
pressure of 50 PSIG.
Stainless Steel 2/3 Steam Jacketed
Cooker/Mixer, Floor Mounted, Tilting,
Direct Steam, 40, 60 or 80-Gallon
Capacities With Twin Shaft Agitator.
constructed to be NSF listed, meeting NSF
requirements.
DRAWOFF: Bottom outlet to be 2” flush mounted,
sanitary, quick opening ball valve.
STEAM PRESSURE: Kettle shall operate
dependably at steam pressure of 50 PSIG or below
(to a minimum of 5 PSIG). Higher working pressure
available. The steam supply shall be injected
directly into the jacket through the trunnion and
the condensate shall be removed through a tube
contained in the jacket and connected to the opposite
trunnion. No exposed steam piping or obstructions
shall be on the kettle body.
CONTROLS: Agitator to be electronic, variable
speed-control type, capable of operating at any RPM
between maximum and minimum settings.
INSTALLATION REQUIREMENTS: 3/4”
NPT steam inlet and condensate connection are
provided. A remote steam source is required. A
steam trap assembly with check valve and globe
valve is provided as standard . Unit requires agitator
power connection, specify 208 Volt (1 or 3-phase is
standard). Other voltages are available.
OPTIONS/ACCESSORIES:
240, 480 Volt Power Supply
(For agitator motor)
Kettle Brush Kit
Pan Carrier
Wall Mount With In Wall Carrier
Gallon Master
Basket Insert
Cold Water Cooling
Working Pressure (higher or
lower than 50 PSIG)
Lip strainers
Contour measuring strips
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
Cooker/Mixers
146764 RevC
Revised 04/12
info@groen.com
ice.com
DL
P/N 141239 REV B
TABLE OF DIMENSIONS
NOTES:
D-40 TA/3
MODEL
D-40 TA/3
D-60 TA/3
40 GAL.
60 GAL.
CAPACITY
(DIM) ARE IN MM.
STEAM PIPING SHOWN ON PRINT
ARE FOR REFERENCE ONLY. UNIT
WILL BE SHIPPED WITHOUT PIPING INSTALLED.
SERVICE CONNECTIONS:
PLAN VIEW 1=2
ÿ13.00
1: ELECTRICAL POWER CONNECTION, AGITAIOR
1-3/4" DIAMETER HOLE
ELEVATION 1=2
3. STEAM INLET CONNECTION.
4. STEAM OUTLET CONNECTION.
INCH
MM
INCH
MM
INCH
MM
A
26
660
30
762
34
864
B
43.5
1105
47.5
1207
51.5
1308
C
42
1067
44
1118
46
1168
D
7-1/2
191
7
178
4-1/2
114
E
4
102
4
102
4
102
F
10-1/2
267
11-1/2
292
10
254
G
22
559
25
635
27
686
H
36
914
40
1016
40-1/2
1029
J
54
1372
59
1500
59
1500
K
71
1803
80
2032
81
2057
L
23-1/4
591
25-1/4
641
24-3/4
629
M
22-3/8
568
24-3/4
629
26-1/8
664
N
19-5/8
498
20-5/8
524
22-7/8
581
P
30-3/4
781
34-3/4
883
38-1/4
972
Q
15-3/8
391
17-3/8
441
19.1/8
486
R
19-1/4
489
23-1/4
591
23-1/8
587
S
16
406
18
457
20
508
T
24
610
27
686
29
737
U
38-3/4
988
42-3/4
1086
43-1/4
1099
5. COLD WATER & HOT WATER SUPPLY
30" BACK CLERANCE
FOR TILTING
P
APPROX. WEIGHT
Q
80 GAL.
DIM.
2: AGITATOR MOTOR SPEED SWITCH.
WALL
D-80 TA/3
615
670
740
3-3/4
ELECTRICAL
CONNECTION
1
5
R
3/4" STEAM
INLET
DOUBLE PANTRY
FAUCET
3
S
480V 3PH
40
GAL
MAXIMUM
1-1/2
54
150
5A
4.55 A
2.28 A
MINIMUM
3/4
27
75
6.3 A
5.7 A
2.83 A
60
GAL
MAXIMUM
2
46
120
6.8 A
6A
3A
MINIMUM
1
23
60
4.7 A
4A
2A
80
GAL
MAXIMUM
2
46
120
6.8 A
6A
3A
MINIMUM
1
23
60
4.7 A
4A
2A
2
3/4" CONDENSATE
OUTLET
4
ELEC. LOAD RATING
208V 3PH
240V 3PH
AGITATOR MOTOR DATA SPECIFICATIONS
RPM MAIN
H.P.
RPM SECONDARY
C
2-5/8
A
M
N
B
ELECTRICAL
CONNECTION
K
CLERANCE INCLUDING
HANDLE & LATCH DEVICE
G
ELECTRICAL
CONNECTION
1
H
L
J
U
VALVE
OPEN
F
17-1/8
L
E
T
POUR
PATH
VALVE
CLOSE
ÿ.56
FLOOR
CL
ÿ.56
2.00
2.66
141239 REV. B
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising