PROJECT NAME: LOCATION: ITEM NO: FX SERIES QTY: BUILT-IN REAR ENGINE MODULAR MODEL FX-1RE-290 Single refrigerated insert with unfinished top and rear compressor. The FX Series revolutionizes point of use refrigeration by allowing the operator to adjust the temperatures from -5°F (freezer) operation up to 40°F (refrigerator) or any setting in between utilizing its unique convertible refrigeration system. Using a patented technology that provides 100% in-drawer cooling, this ultra-efficient self-contained system provides precise temperature control without compromising operator flexibility. MODEL NO: AIA NO: SIS NO: CSI SECTION: 11400 AVAILABLE MODELS: FX-1RE-290 FX1-REA-290 STANDARD FEATURES: • Convertible Refrigeration System (Refrigerator to Freezer) • Point-of-use Size and Design • Precise Temperature Control • Patented In-drawer Cooling System • Removable Insulated Drawer Compartment • Ambient Drawer Track System • Full-Extension Drawer System • 100% Front Breathing (breaths in the front, discharges out the back) • Horizontal Gasket is Out of Harms Way • Individual Compressor Per Drawer REFRIGERATION SYSTEM: The FX Series intermediate tracks are removable with simple tools and can only be reinstalled one-direction for proper fit. The drawer system has been tested with over 300,000 cycles without failure (90 pound test load per drawer). Single drawer unit with unfinished top and rear compressor. Model FX-1RE-290 shown. REMOVABLE INSULATED INSERT: This exclusive design allows full removal of the refrigerated compartment for cleaning or pre-loading. Made of high impact ABS plastic with high density polyurethane insulation. Provides unparalleled insulation value with no air gaps. TEMPERATURE STATEMENT: The unit is provided with a electronic temperature controller that can be easily adjusted by the operator to any temperature setting between -5°F (freezer) operation up to 40°F (refrigerator). CABINET EXTERIOR: The cabinet exterior is high grade stainless steel where seen to allow long use and beauty while providing easy to maintain and clean surfaces. uses a patented in-drawer cooling system that directs 100% of the cooling inside the insulated and removable drawer Insert (see below). The evaporator coil is mounted horizontally above the drawer Insert with an integral gasket CABINET BASE/INTERIOR: The cabinet that seals against the insulated drawer compartment interior is high grade stainless steel where seen to when closed. The refrigeration system operates only allow long use and beauty while providing easy to when the drawer is closed, efficiently managing the maintain and clean surfaces. air-flow while reducing energy and humidity build-up. Press-fit removable gasket with magnet-to-magnet seal is ELECTRICAL: Standard 115 volt with NEMA standard. 5-15 cord and plug. Hard wired plug in multi-stack DRAWER SYSTEM: The FX Series drawer system applications, allows up to three units on one wall circuit. is the only full-extension, full product view, drawer system that has the drawer tracks outside the cooled ORIGIN OF MANUFACTURE: Designed and compartment offering a more reliable, durable system manufactured in the United States. not prone to the cold or debris environment common in traditional drawer systems. The full-extension tracks are constructed of corrosion resistant coated steel with a fully integrated support system. The drawer box and OPTIONS/ACCESSORIES: Top Kit (35” x 34.5”, 1.5” thick) for Work Top Application Top Kit (38” x 36”, 2” thick) for Cooking Equipment Application 3.5” Caster Kit 6” Leg Kit Stainless Steel Back Panel Additional Insulated Inserts: Qty. _____ Pan Racks Recessed Handle(s) Poly Tub Divider Stainless Steel Tub Divider FX Series PPSPECFX1RE RevD Revised 08/17 FX-1RE-290 (REAR ENGINE MODULAR) Incorporating Adande® Technology NEMA 5-15P D HP 1" LONG X 0.75 DIA. RUBBER BUMPERS 34.5" 27.7" 16.3" 11.94" 33.43" 34.5" 35" Storage Amp Draw Refrig. Power Usage Freezer Power Usage Volt NEMA Ship Weight 1/4 HP 1.7 .88 KW 1.65 KW 115 5-15P 245 1/4 HP 1.7 .88 KW 1.65 KW 115 5-15P 245 L D* H No. of Drawers (cubic feet) Comp. Size FX-1RE-290 35” 34.5” 16.3” 1 3.1 FX-1REA-290 35” 34.5” 14.7” 1 2.5 Model (actual) (per day) (per day) (lbs) *Depth is 35-1/2” with bumper 888-994-7636, unifiedbrands.net © 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project