Randell | FX-1A-290 | Spec sheet | Randell FX-1A-290 Spec Sheet

Randell FX-1A-290 Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
FX SERIES
QTY:
LOW HEIGHT MODULAR MODEL FX-1A-290
Single refrigerated insert with unfinished top, low height. The FX Series revolutionizes point of use refrigeration
by allowing the operator to adjust the temperatures from -5°F (freezer) operation up to 40°F (refrigerator) or
any setting in between utilizing its unique convertible refrigeration system. Using a patented technology that
provides 100% in-drawer cooling, this ultra-efficient self-contained system provides precise temperature
control without compromising operator flexibility.
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
STANDARD FEATURES:
• Convertible Refrigeration System (Refrigerator to
Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Compartment
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REFRIGERATION SYSTEM: The FX Series
uses a patented in-drawer cooling system that directs
100% of the cooling inside the insulated and removable
drawer Insert (see below). The evaporator coil is mounted
horizontally above the drawer Insert with an integral gasket
that seals against the insulated drawer compartment
when closed. The refrigeration system operates only
when the drawer is closed, efficiently managing the
air-flow while reducing energy and humidity build-up.
Press-fit removable gasket with magnet-to-magnet seal is
standard.
DRAWER SYSTEM: The FX Series drawer system
is the only full-extension, full product view, drawer
system that has the drawer tracks outside the cooled
compartment offering a more reliable, durable system
not prone to the cold or debris environment common
in traditional drawer systems. The full-extension tracks
are constructed of corrosion resistant coated steel with
a fully integrated support system. The drawer box and
intermediate tracks are removable with simple tools and
can only be reinstalled one-direction for proper fit. The
drawer system has been tested with over 300,000 cycles
without failure (90 pound test load per drawer).
REMOVABLE INSULATED INSERT: This
exclusive design allows full removal of the refrigerated
compartment for cleaning or pre-loading. Made of
high impact ABS plastic with high density polyurethane
insulation. Provides unparalleled insulation value with
no air gaps.
Single drawer unit with unfinished
top, low height. Model FX-1-290
shown.
TEMPERATURE STATEMENT: The unit
is provided with a electronic temperature controller
that can be easily adjusted by the operator to any
temperature setting between -5°F (freezer) operation
up to 40°F (refrigerator).
CABINET EXTERIOR: The cabinet exterior is
high grade stainless steel where seen to allow long use
and beauty while providing easy to maintain and clean
surfaces.
CABINET BASE/INTERIOR: The cabinet
interior is high grade stainless steel where seen to
allow long use and beauty while providing easy to
maintain and clean surfaces.
ELECTRICAL: Standard 115 volt with NEMA
5-15 cord and plug. Hard wired plug in multi-stack
applications, allows up to three units on one wall
circuit.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
OPTIONS/ACCESSORIES:
Flange Kit for FX-1A (for
installation in equipment or
units by others)
Top Kit (43.3” x 28”,1.5” thick)
for Work Top Application
Top Kit (48” X 33”, 2” thick) for
Cooking Equipment Application
3.5” Caster Kit
6” Leg Kit
Additional Insulated Inserts:
Qty. _____
Pan Racks
Recessed Handle(s)
Poly Tub Divider
Stainless Steel Tub Divider
FX Series
PPSPECFX1A RevB
Revised 01/17
FX-1A-290 (LOW HEIGHT MODULAR)
Incorporating
Adande®
Technology
43.3"
[1100]
27.7"
[704]
28"
[711]
10.33"
[262]
RIGHT SIDE VIEW DRAWER EXTENDED
TOP VIEW
33.70"
[856]
3.43"
[87]
14.7"
[374]13.94"
[354]
13.94"
[354]
9.41"
[239]
9.2"
[234]
28"
[711]
43.3"
[1100]
RIGHT SIDE VIEW
FRONT VIEW
L
D
H
No. of
Drawers
Storage
(cubic feet)
Comp.
Size
43.3”
28”
14.7”
1
2.5
1/4 HP
Amp
Draw
Refrig. Power
Usage
Freezer
Power Usage
Volt
NEMA
Ship
Weight
1.7
.79 KW
1.7 KW
115
5-15p
245
(actual)
(per day)
(per day)
(lbs)
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising