Randell | 20000-513 | Spec sheet | Randell 20000-513 Spec Sheet

Randell 20000-513 Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
CHEF STAND
QTY:
SELF-CONTAINED REFRIGERATED BASE MODEL 20000-513
32 1/2” deep self-contained refrigerated cooking equipment stand with reinforced stainless steel top. 12 gauge
steel subtop, and full marine edge. Expansion valve refrigeration system with thermostatic control for operator
adjustability. R-513a refrigerant is “CFC free”. Unit on 6” high adjustable legs or 4” casters (-C4 models). These
units feature our Patented Drawer Cartridge Assembly. A fully welded, unitized drawer cartridge assembly with
a quick release that allows the refrigerated drawers to be easily removed for cleaning. 3 year warranty on the
entire drawer system.
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION:
11400
SHORT FORM SPEC: Randell 20000-513 series model refrigerated chef stand with R513 refrigeration system. Includes
one-piece stainless steel marine top reinforced with 12 gauge steel subtop and refrigerated base. Expansion valve refrigeration system
with thermostatic control. Drawers to be fully welded, unitized cartridge assembly with quick release to allow easy removal of drawers,
cartridge removable without tools. Base interior constructed of anodized aluminum with coved corners, drawer opening frames shall be
high impact ABS plastic and be cooled with a blower coil located behind the mullion. Drawers have stainless steel fronts with easy to
grasp handles and press-fit magnetic gaskets. Unit to be shipped on standard 6” adjustable legs mounted to full length leg rail which
allows legs to be relocated to avoid floor obstacles (-C4 models shipped on 4” casters in lieu of legs)
AVAILABLE MODELS:
27” DRAWER, LEGS:
20048-513
20072-513
20078-513
20105-513
32” DRAWER, LEGS:
20048-32-513
20072-32-513
20105-32-513
27” DRAWER, CASTERS:
20048-513-C4
20072-513-C4
20078-513-C4
20105-513-C4
32” DRAWER, CASTERS:
20048-32-513-C4
20072-32-513-C4
20105-32-513-C4
STANDARD FEATURES:
•
•
•
•
•
•
•
•
•
•
SNAP compliant R-513a “CFC free” refrigerant
Expansion valve
Hot gas condensate evaporator
Drawer Cartridge Assemblies are fully removable with
Quick Release feature
Foamed in place “CFC” free urethane insulation
Marine edge stainless steel top with 12 gauge steel
subtop to hold the heaviest cooking equipment (225 lbs/ft.)
Removable 14 gauge drawer tracks on 1 5/8” heavy
duty stainless steel bearings
Drawers to accommodate (2) 12”x 20”x 4”pans per
drawer (pans not included)
6” high adjustable legs mounted to full length leg rails allow
relocating legs to avoid floor obstacles
4” high casters on -C4 models, front two locking
CABINET EXTERIOR: Cabinet body is constructed of
all metal. The top, front, and louver panel are stainless steel. Full
length, 12 gauge steel subtop beneath one piece stainless steel
top with 1/2” high single thickness marine edge. Body ends are
stainless steel. 6” stainless steel legs with adjustable bullet feet
are mounted to full length heavy gauge steel leg rails integrally
welded to bottom of assembly. 4” high casters, front two locking,
on -C4 models. Unit totally prewired to junction box. 9’ cordset
for 115V operation.
32 1/2” deep self-contained refrigerated cooking
equipment stand with reinforced stainless steel top.
Model 20072-513 shown.
CABINET INTERIOR: Interior of cabinet is fully
coved to meet NSF standard #7. The interior is constructed
of anodized aluminum with coved corners for easy clean-up.
Drawer opening frames are ABS and contain magnetic strip
for positive seal of drawer gaskets. Unit insulated with CFC
free, foamed in place polyurethane.
REFRIGERATED DRAWERS: Fully welded,
unitized drawer cartridge assembly - patented. Heavy duty
full extension 14 gauge drawer tracks on 1 5/8” heavy duty
stainless steel bearings. Will accommodate (2) 12” x 20” x
4” deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless
fronts, mounted to drawer cartridge assembly with easy
to grasp drawer handles. Drawers with press fit magnetic
gaskets - (designed for installation & removal without tools).
OPTIONS/ACCESSORIES:
Flat top
Length modification of:
Compressor on left
Drawer sets to accept 6” deep
pans (applies to all drawers/
sections of unit; adds 4” to unit
height)
Optional drawer size:
19”
44”
REFRIGERATION: The system will utilize SNAP
compliant, (0) ozone depletion (ODP) and (631) global
warming potential (GWP), R-513a expansion valve
refrigeration system to include condensing unit, and
thermostatic control for field adjustability. Compressor
housing to allow maximum airflow and includes standard
condensate evaporator. Mullion coil, is coated to resist
corrosion, and offers maximum air flow.
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
Chef Stand
PPSPEC0051 RevG
Revised 03/19
20000-513
The Randell
Patented Cartridge
System
1/1
19" DRAWERS
• Fully welded 14
gauge unitized Drawer
Cartridge assembly.
• 14 gauge drawer tracks
on 1 5/8” heavy duty
stainless steel bearings.
• Heavy duty full extension
tracks to accommodate
12” x 20” x 4” deep
pans, two per drawer.
Pans by others.
1/1
1/1
1/1
•
Drawers with stainless
1/9
1/9
1/9
steel drawer fronts &
1/1
1/9
1/9
1/9
1/1
1/1
1/1
1/1 1/9
1/1
1/1
1/1
1/1
1/1 easy to grasp drawer
1/9
1/1
1/9
1/9
1/9
handles.
1/1
1/9
• Quick release allows
19" DRAWERS19" DRAWERS
21"19"
DRAWERS
DRAWERS
21" DRAWERS
21"DRAWERS
DRAWERS
24"
24" DRAWERS24"
DRAWERS
27"
DRAWERS27" DRAWERS27" DRAWERS
drawers and catridges,
21" DRAWERS
24" DRAWERS
27" DRAWERS
removable without tools.
1/1
1/1
1/1
1/1
1/1
FX TUB
FX TUB
FX
27"TUB
DRAWERSFX TUB
Model
L
D
H
on Legs
1/1
1/1
Drawers
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
44" Drawer
1/1
27" DRAWERS
27" DRAWERS27" DRAWERS27" DRAWERS
REAR MOUNT BOTTOM DRAWER
H
1/1
27" DRAWERS
27" DRAWERS27" DRAWERS
32"DRAWERS 32"DRAWERS32"DRAWERS
32"DRAWERS
19" Drawer
1/1
1/1
Pan Capacity
HP
BOTTOM
MOUNT
DRAWER
REAR
BOTTOM
MOUNT
DRAWER
BOTTOM DRAWER
on Casters REAR MOUNT REAR
Volt
Amp
NEMA
Ship Wt.
20048-513 / -C4
48”
32 1/2”
26”
24”
(2) 27”
(4) 12” x 20”
1/4
115/60/1
6
5-15P
400
20072-513 / -C4
72”
32 1/2”
26”
24”
(4) 27”
(8) 12” x 20”
1/3
115/60/1
7.4
5-15P
530
20078-513 / -C4
78”
32 1/2”
26”
24”
(4) 27”
(8) 12” x 20”
1/3
115/60/1
7.4
5-15P
540
20105-513 / -C4
105”
32 1/2”
26”
24”
(6) 27”
(12) 12” x 20”
1/2
115/60/1
10.9
5-15P
675
20048-32-513 / -C4
53”
32 1/2”
26”
24”
(2) 32”
(4) 12” x 20”
1/4
115/60/1
6
5-15P
420
20072-32-513 / -C4
82”
32 1/2”
26”
24”
(4) 32”
(8) 12” x 20”
1/3
115/60/1
7.4
5-15P
550
20105-32-513 / -C4
120”
32 1/2”
26”
24”
(6) 32”
(12) 12” x 20”
1/2
115/60/1
10.9
5-15P
695
888-994-7636, unifiedbrands.net
© 2019 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising