Randell | R1R-29-2L | Spec sheet | Randell R1R-29-2L Spec Sheet

Randell R1R-29-2L Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
REACH-IN
QTY:
STANDARD SPLIT DOOR REFRIGERATOR MODEL R1R-29-2L
The Model R1R-29-2L represents Randell’s Standard Series reach-ins in a single section, split door refrigerator.
This model is designed to provide maximum menu flexibility in a small vertical footprint. The single compressor
system is designed to meet the latest DOE energy standards and is balanced with the highest quality
components and controls to provide exceptional performance for the operator.
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
STANDARD FEATURES:
•
•
•
•
•
•
•
•
•
•
•
Energy efficient single compressor system
Digital controls
Digital temperature read-outs
Automatic adaptive defrost system
Efficient hot gas condensate evaporator
Door activated LED interior lighting
Adjustable, heavy duty, coated wire shelves
9’ cord and plug
Door lock with integral door clasp
5” casters (front two locking)
Door pressure relief valve
CABINET CONSTRUCTION:
•
•
•
•
•
Exterior Front: Stainless Steel
Exterior Sides: Stainless Steel
Exterior Body: Galvanized Steel
Interior Sides: Anodized Aluminum
Interior Floor: Stainless Steel
Insulation is foamed in place high density polyurethane.
Units provided with coated wire shelves with rear vertical
turn-up to assure proper air flow. Each shelf is adjustable.
Unit is provided with 5” casters (field installed) are affixed
to bottom of unit.
REFRIGERATION SYSTEM: Self-contained
compressor refrigeration system using R-290 is
balanced to regulate interior mounted evaporator
coil providing superior air circulation to the storage
compartment. Top-mounted compressor design
provides easier access for preventative maintenance
and condenser cleanings and accumulates less dirt
than bottom-mount compressors. Condensate is
evaporated by a rear mounted hot gas system that has
protective coating on hot gas loop for extended life.
Refrigerator is designed to operate between 33ºF and
38ºF. Standard settings are easily managed by simple
up/down arrows. The controllers also have lighted
door open indicators which are followed by three lowvolume beeps after the door is open for thirty seconds
as well as fan-on indicators.
ELECTRICAL:
Unit comes from the factory
prewired with a 9ft. cord and plug and ready for
plugging into a dedicated 115/60/1 phase, 15-amp
outlet.
OPTIONS/ACCESSORIES:
Extra interior shelves
DOORS:
• Left Hand Hinge
• Exterior: Stainless Steel
• Interior: Anodized Aluminum
Both doors are self-closing with torsion type concealed
hinges providing a clean exterior look suitable for front
of the house installations. The door stays open after
90-degrees for easy loading. Cabinet is provided with
door pressure relief device to assist in easy opening of the
doors. Interior is illuminated with energy-efficient LED lights
on door activated switch.
Reach-In
SP SHT1733 RevE
Revised 03/18
R1R-29-2L
Model
R1R-29-2L
Hinged
L
D
H
Doors
Storage
Cu. Ft.
Shelves
HP
Power
Amps
NEMA
Ship Wt.
Left
28.75"
32.75"
83"
(2) 1/2
21
3
1/4
115/60/1
2.5
5-15P
270
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising