Randell | RFT | Spec sheet | Randell RFT Spec Sheet

Randell RFT Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
DROP-IN
QTY:
MODEL NO:
FROST TOP MODEL RFT
AIA NO:
Drop-in, self-contained, mechanically cooled recessed frost top display unit. Electronically controlled R290
refrigeration system with urethane insulation and 1” drain. Unit provided with cordset for 115v operation.
SIS NO:
CSI SECTION:
11400
SHORT FORM SPEC: Randell RFT series drop-in frost top cold display with 1-piece 16 gauge stainless steel top
with 1” drain, insulated with CFC free foamed in place polyurethane insulation. Electronically controlled R290 refrigeration
system is suspended below body on swivel base corrosion resistant framework and provided with dual air movement louvered
panel. Recessed top is sized to accommodate half and/or full sized sheet pans.
Model RFT-6 shown
AVAILABLE MODELS:
CABINET EXTERIOR: Top and coved corner
STANDARD FEATURES:
UNIT INTERIOR: Interior fitted with 1” drain at one
end. Insulated with CFC free, foamed in place polyurethane.
Recessed top accommodates half and/or full sized sheet
pans.
RFT-2
RFT-3
RFT-4
RFT-5
RFT-6
•
•
•
•
•
•
•
•
•
•
•
Swivel base condensing unit allows for front or side
location of the single air intake/exhaust louver
Exclusive easy mount system
Self-contained, wrapped refrigeration system with electronic
control, system utilizes “CFC free”, R-290 refrigerant
All stainless steel top and coved corner interior
1” NPS brass drain provided
Foamed in place, “CFC free” urethane insulation
One dual air movement louver provided
9’ corset for 120V plug-in operation
Self-contained, refrigerated unit for cold display without ice
SNAP compliant (0) ozone depletion (ODP) and (3) global
warming potential (GWP)
Easy installation with sliding duct, louver and hold
down brackets
interior to be constructed of 16 gauge stainless steel.
Exterior body to be corrosion resistant steel. Condensing unit
mounted on corrosion resistant framework, suspended below
unit body. (1) stainless steel louver panel provided for field
installation in counter.
OPTIONS/ACCESSORIES:
Remote on/off switch
Custom size
REFRIGERATION: SNAP compliant (0) ozone
depletion (ODP) and (3) global warming potential (GWP),
R-290 refrigeration system to be wrapped refrigeration
construction. Condensing unit, and electronic control for
operator adjust-ability mounted on corrosion resistant
framework, suspended below the unit body. 8’ cordset
(NEMA 5-15P) supplied for 115V operation.
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
Drop-Ins
SP SHT1919 RevD
Revised 12/19
RFT
Exhaust side
Exhaust
Total Exhaust Are
Exhaust Area slots :
Perforation size : 0.
Air Intake
Total Air Intake Are
Air Intake Area : 10
Perforation Size : 0.
Exhaust side
Exhaust side
Exhaust
Exhaust
Air Intake side
Total
Area
in2
• ifExhaust
the louver
is =to88.7
be changed/swapped
with a differe
2 slots
Exhaust
Area
slots
:
10
x
54
=
540
Totalon
Exhaust
Area
=
88.7
Exhaust and Intakeinshould
be maintained all time
Perforation
: 0.75
x .22
in (19
mm x 5.5mm )
Exhaust
Areasize
slots
: 10inx 54
= 540
slots
ventilation.
Perforation size : 0.75 in x .22 in (19 mm x 5.5mm )
Air Intake
Air Intake
Total Air Intake Area = 88.7 in2
2 = 540 slots
Air Intake
Area : Area
10 x 50
& 2 in
x 20
Total
Air Intake
= 88.7
Perforation
Size: :10
0.75
in&x .22
in (19
mmslots
x 5.6 mm)
Air
Intake Area
x 50
2 x 20
= 540
Perforation Size : 0.75 in x .22 in (19 mm x 5.6 mm)
Model
Length
Width
Cutout Dim
Pan Capacity
18” X 13”
L
RFT-2
29.25"
21.75”
2
27.75"
RFT-3
42.25”
21.75”
3
40.75"•
RFT-4
55.25”
21.75”
4
53.75"
RFT-5
68.25”
21.75”
5
66.75"
RFT-6
81.25”
21.75”
6
79.75"
•
HP
Volts
Amps
NEMA
Ship Wt (Lbs)
20.25"
1/4
115/60/1
3.5
5-15P
140
20.25"
1/4
115/60/1
3.5
5-15P
245
20.25"
1/4
115/60/1
3.5
5-15P
280
W Intake side
Air
Air Intake side
if the louver is to be changed/swapped with a different one, the effective area
20.25"
115/60/1
3.5
if the
louverand
is toIntake
be1/4
changed/swapped
with aalldifferent
one,5-15P
theadequate
effective 175
area
on
Exhaust
should be
maintained
time to ensure
on
Exhaust
and
Intake
should
be
maintained
all
time
to
ensure
adequate
ventilation.
20.25"
1/4
115/60/1
3.5
5-15P
210
ventilation.
888-994-7636, unifiedbrands.net
© 2019 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising