Randell | RSB-DTSSAF | Spec sheet | Randell RSB-DTSSAF Spec Sheet

Randell RSB-DTSSAF Spec Sheet
PROJECT NAME:
LOCATION:
SERVING LINES
ITEM NO:
QTY:
FOOD SHIELD STANDARD BREATH GUARD MODEL RSB-DTSSAF
MODEL NO:
Randell’s Standard Series breath guard is a 1” diameter 90 degree bent tubing with a stainless steel #4 “satin”
finish. The surface flange is a 1.25” x 3”, with a standard cap. The double-tier, single sided design glass is a
non-adjustable self service on top tier and adjustable full/self service front & glass top. Please consult factory
for pricing or finish options.
AIA NO:
SIS NO:
CSI SECTION: 11400
AVAILABLE MODELS:
RSB-DTSSAF-24
RSB-DTSSAF-30
RSB-DTSSAF-36
RSB-DTSSAF-48
RSB-DTSSAF-60
RSB-DTSSAF-72
RSB-DTSSAF-86
NSF LISTED FINISH:
• Stainless steel #4 finish
• Other finishes available (contact factory)
GLASS:
• Standard side glass is 1/4” tempered
• Standard top and front glass is 3/8” tempered
(additional leg set required after reaching 66”
maximum top glass length)
LIGHT & WARMER OPTIONS:
• LED light unit
• Heat only unit
• Heat and light combo unit
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
BREATH GUARD LENGTH GUIDE:
Unit Length
Center Line Length
Overall Length
24”
21.25"
23.75"
30”
27.25"
29.75"
36”
33.25"
35.75"
48”
45.25"
47.75"
60”
57.25"
59.75"
72”
69.25"
71.75"
86”
Contact Factory for Size Options
Serving Lines
SP SHT1741 RevA
Issued 06/17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising