Randell | 33000 | Spec sheet | Randell 33000 Spec Sheet

Randell 33000 Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
CUSTOM
QTY:
OPEN BASE ELECTRIC HOT FOOD TABLE MODEL 33000
MODEL NO:
Open shelving base hot food table with 16 gauge stainless top, and integral backsplash with 45˚ return.
Individual die-stamped 12 x 20 top openings, common water bath tank with thermostatically controlled external
heating elements, and 8” deep plate shelf. Drain, gate valve, and fill faucet provided.6” high adjustable and
movable legs.
AIA NO:
SIS NO:
CSI SECTION: 11400
AVAILABLE MODELS:
33330
33348
33360
33372
33386
STANDARD FEATURES:
• Available under one piece top with other modular
equipment up to 16’ in length
• 6” high legs—adjustable and movable
• Thermostatic control for precise food temperatures
• Available for 208 or 240 volt operation only
• Heating elements mounted beneath tank to avoid
troublesome cut outs in tank body.
• Individual die-stamped 12 x 20 openings hold pans
above common bath tank
• Drain, gate valve and swivel fill faucet provided
• 45˚ integral stainless backsplash providing access to
electrical chase is standard. 90˚ stainless backsplash
is optional.
UNIT TOP: Top to be one piece of die formed 16
gauge stainless steel with 2 5/8” nosing. Backsplash
to be coved cornered, with 45˚ return at top and overall
height of 6 3/4”. Ends at top fitted with recessed heavy
duty steel bars for field bolting units together, producing
a hairline seam. Top stamped with individual 12 x 20 die
formed raised perimeter openings. Swivel fill faucet
provided. Unit with 8” deep, removable 18 gauge
stainless steel plate shelf, and 8” wide x 1/2” thick, full
length NSF composition workboard.
CONTROLS: Unit comes standard with
thermostatic controls(s). Each control(s) has a lighted
on/off switch that allows turning off of control(s)
without moving temperature setting. Control(s) and
elements mounted on front of 8” deep removable
stainless steel plate shelf designed to allow easy
access to elements, control(s) and elements pans.
Connections to heating elements are located outside
of heated zone to avoid wiring deterioration. Individual
food wells wired to common junction box(es). Power
cord is supplied.
Open Base Electric Hot Food Table.
Model shown with optional finished
end.
UNIT BASE: Body ends to be die-formed stainless
steel, finished and polished on the inside with
corrosion resistant exterior. Insulated nosing and
insulated back wall provided. Bottom shelf to be
22 gauge stainless steel with marine edge with
integrally welded channel bracing, and 8” coved
cornered turn up at rear. Legs to be 6” high stainless
steel with adjustable bullet foot. Legs mounted to full
length channel frame assembly which is integrally
welded to bottom of body assembly. Legs can be
moved left to right to avoid floor obstacles during
installation.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
FOOD WELLS: 12” x 20” die formed raised
perimeter openings in stainless steel top. Individual,
thermostatically controlled, 3000 watt element(s), as
required, mounted below one piece 18 gauge, 7” deep
stainless steel water bath tank to heat food wells. 1”
stainless steel drain nipple and gate valve provided.
Custom
PPSPEC0126 RevB
Revised 11/14
33000
LEGEND FOR
MODEL # 33000
AFF=ABOVE FINISHED
FLOOR
WI
30" X 8" X .5"
POLY BOARD
PLATE SHELF
48" X 8" X .5"
POLY CUTTING BOARD
60" X 8" X .5"
POLY CUTTING BOARD
72" X 8" X .5"
POLY CUTTING BOARD
PLATE SHELF
PLATE SHELF
PLATE SHELF
FILL FAUCET WATER
CONNECTION STUB
FROM REAR OF UNIT
1/2" COPPER @
24" AFF
DL
DRAIN LINE
CONNECTION STUB
FROM REAR OF UNIT
TO 1/2 " SWEAT FIT
COPPER 19" AFF.
J-BOX 22" AFF
CHECK ONE:
208/60/1Ph
14.4Amps 3.0Kw
240/60/1Ph
12.5Amps 3.0Kw
OPEN STORAGE
OPEN STORAGE
OPEN STORAGE
HARDWIRE
CONNECTION
OPEN STORAGE
NOTE: ALL
MECHANICALS ARE
SHOWN IN APPROXIMENT
LOCATION
30"
48"
72"
60"
WI
J
DL
86" X 8" X .5"
POLY CUTTING BOARD
8"
42.75"
36"
PLATE SHELF
OPEN STORAGE
33"
SECTION VIEW
86"
33” Deep
29” Deep
Length
30”
48’
60”
72’
86’
Length
Height*
36”
36”
36”
36”
36”
Model No.
Wells
2
3
4
5
6
Height*
Elements
1
1
2
2
2
Wells
213
294
365
421
477
Elements
K.W.
3
3
6
6
6
Amps
14.4
14.4
28.8
28.8
28.8
K.W.
3
3
6
6
6
Amps
240 Volt Models
12.5
12.5
25
25
25
K.W.
Ship Wt. (lbs)
208 Volt Models
30”
48’
60”
72’
86’
33330
33348
33360
33372
33386
36”
36”
36”
36”
36”
2
3
4
5
6
2
3
4
5
6
213
294
365
421
477
K.W.
3
3
6
6
6
Amps
14.4
14.4
28.8
28.8
28.8
3
3
6
6
6
12.5
12.5
25
25
25
Ship Wt. (lbs)
240 Volt Models
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
208 Volt Models
Amps
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising