Randell | 12000 | Spec sheet | Randell 12000 Spec Sheet

Randell 12000 Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
CUSTOM
QTY:
DRAWER BASE UTILITY STAND MODEL 12000
MODEL NO:
Drawer base utility stand with 16 gauge reinforced stainless top, and integral backsplash with 45˚ return. Selfclosing dry storage drawers on 16 gauge tracks with 1 5/8” stainless bearings and removable plastic pans. 6”
high adjustable and movable legs.
AIA NO:
SIS NO:
CSI SECTION: 11400
AVAILABLE MODELS:
12318
12324
12336
12348
12360
12372
STANDARD FEATURES:
• Available under one piece top with other modular
equipment up to 16’ in length
• 6” high legs—adjustable and movable
• Removable plastic pan(s) supplied for each self-closing
drawer
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
UNIT BODY: Body ends to be die formed stainless
steel, finished and polished on the inside, with corrosion
resistant exterior. Shelf to be 22 gauge stainless steel
with marine edge at front, 6 5/8” removable coved
cornered turn up at rear, and integrally welded channel
bracing. Dry storage drawer(s) are located below shelf.
Drawer pans are plastic, removable without tools, with
drawer track of 16 gauge stainless steel with 1 5/8”
stainless steel bearings, self-closing. Drawer front of
22 gauge stainless steel. Drawer track, pan(s) and
front assembly contained in 20 gauge stainless steel
housing. Legs to be 6” high stainless steel
withadjustable bullet foot. Legs mounted to full length
channel frame assembly which is integrally welded to
bottom of body assembly. Legs can be moved left to
right to avoid floor obstacles during installation.
Custom, Drawer Base Utility Stand.
Model shown with optional finished
end.
UNIT TOP: Top to be one piece of die formed 16 gauge NOTE: Multiple units may be built under a common
stainless steel with 2 1/2” nosing. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6
3/4”. Ends at top fitted with recessed heavy duty steel bars
for field bolting units together, producing a hairline seam.
Top reinforced with (2) full length channel braces.
top to get to longer lengths.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
OPTIONS/ACCESSORIES:
Additional drawers
Urn trough
Depth modification
Casters
Custom
PPSPEC0117 RevA
Revised 10/13
12000
B
A
OPEN
STORAGE
OPEN
STORAGE
18" DRY
24" DRY
18"
A
OPEN STORAGE
A
B
A
OPEN STORAGE
24" DRY
24" DRY
36"
B
B
OPEN STORAGE
18" DRY
18" DRY
24"
B
B
A
18" DRY
48"
24" DRY
18" DRY
60"
42.75"
B
36"
33"
OPEN STORAGE
24" DRY
24" DRY
24" DRY
72"
29” Deep
ABS DRAWER PANS
Length
18”
24”
36”
48”
60”
72”
Drawer Size
Removable Pan Size
Height*
36”
36”
36”
36”
36”
36”
A 18”
11” x 16” x 6”
Drawers
(1) 18”
(1) 24”
(2) 18”
(2) 24”
(2) 18” (1) 24”
(3) 24”
B 24”
16” x 16” x 6”
152
180
236
285
334
384
18”
24”
36”
48”
60”
72”
12318
12324
12336
12348
12360
12372
Ship Wt. (lbs)
33” Deep
Length
Model No.
Height*
36”
36”
36”
36”
36”
36”
Drawers
(1) 18”
(1) 24”
(2) 18”
(2) 24”
(2) 18” (1) 24”
(3) 24”
152
180
236
285
334
384
Ship Wt. (lbs)
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising