Utility Distribution System Available for Electrical
The M-Series UDS is a Utility Distribution System comprised of a stainless steel sheet metal housing enclosing cable bus electrical system services that provide connections for individual appliances. UDS with only electrical services are Listed by UL as Multi-outlet Assemblies. These systems are intended primarily for use where it is difficult to get access to electrical outlets. Individual point-of-use connection plates are located near the top along the length of the unit.
Dimensions: Horizontal Chase Width: (3) (4)”, Height: 6”, Length: as required. Length: as required. Construction: (200) or (400)-series Stainless Steel. Removable panels held in place with threaded fasteners. Electrical Data: 30 to 100 amperes. 120/208-240 volts. Single- or three-phase.
• Point-of-use branch circuit protection with receptacle mounted adjacent to point-of-use branch circuit protection on 4.5 x 12” connection plate • Ground fault circuit interrupter for 15 & 20 amp, 120/1, straight blade receptacles • Cable bus
Matching electrical cord sets for equipment to be connected 45° Angled peaked top Water tight covers for (outlets) (breakers) Special designs available upon request Pre-punched holes and necessary mounting hardware for installation on work table or counter (layout drawing required) Please reference our website for the most updated product information and specifications.
LENGTH 6 1/4" 1 3/4" 8" WITH OPTIONAL PEAKED TOP DEPTH 4" OR 3" 2" HEIGHT" TABLE HEIGHT 33.0000
KW Volts 1.
E1 Total Connected Load 120/208/3 Reserve for Future Avtec System Capacity Service Size
ELECTRIC Breaker Amp/Pole Conn. Type Length (ft) KW KW KW AMPS 888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.