Capkold | INA/3/RTO | Spec sheet | Capkold INA/3/RTO Spec Sheet

Capkold INA/3/RTO Spec Sheet
PROJECT NAME:
LOCATION:
COOK-CHILL SYSTEMS
RETRACTABLE TILT-OUT AGITATOR KETTLE MODEL INA/3/RTO
CapKold® hemispheric bottom steam jacketed kettle, 2/3 jacket, with retractable tilt-out inclined agitator. 100 PSI
maximum jacket pressure, 3” air operated drop down product discharge valve and variable speed agitator drive.
ITEM NO:
QTY:
MODEL NO:
AIA NO:
SIS NO:
AVAILABLE MODELS:
INA/3-100/RTO (100 GALLON)
INA/3-150/RTO (150 GALLON)
INA/3-200/RTO (200 GALLON)
INA/3-300/RTO (300 GALLON)
CONSTRUCTION:
•Hemispherical bottom jacket is designed for operation
up to 100 PSI maximum pressure and built to ASME
code and National Board registered. Kettle will
operate dependably at any steam pressure between
15 PSI and 100 PSI.
•Capacities are working output gallons
•Type 316 stainless steel inner hemisphere and all
wetted parts. Type 304 elsewhere
•Interior and exterior of kettle finished to a No. 4
Sanitary Finish
•Spiral baffle within jacket for more efficient
circulation of cooling water
•3” air-operated, drop down, stainless steel outlet
valve mounted flush to kettle bottom
•Stainless steel legs with adjustable stainless steel
floor mounting flanges
•3/4” rim-mounted swing spout water fill faucet
•Manufactured to latest sanitary standards and
HACCP compliant
•NSF listed
PINNED AGITATOR DESIGN:
•Tiltable inclined entry type, with easily removable
agitator and breaker bar
•Water hydraulic tilt mechanism
•Replaceable nylon edge scraping blades contact
entire heat exchange surface
•Variable speed gear motor drive with 7-36 RPM
operating range
•Heavy duty T.E.F.C motor
•Anchored on fixed pin for mixing heavy products
•Easy to clean tilt-out agitator
CKINA3RTO Kettle with Pinned
Retractable Tilt-Out Inclined Agitator
CONTROL SYSTEMS:
•Flush mounted temperature sensor at bottom of
kettle
•Emergency stop switch mounted near kettle rim
•Manually controlled hydraulic agitator tilt
mechanism
•Kettle-mounted control valve box pre-piped for
single point utility connections
NOTES:
•Recommend 50-75 PSI (min) steam for rapid
cooking
•Larger Sizes (Consult factory for specifications)
•Single or dual kettle control panel required to
operate (Consult factory for specifications)
OPTIONS/ACCESSORIES:
Remote control valve boxes
3” manual ball valve with 90º
elbow
Prison package
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
Kettles
CKINA3RTO 16039 RevB
Revised 10/13
INA/3-RTO
30"
EP
IW
CWI
CWO
CA
CW
CA HW
S, CWO
CWT, IW
IWT
HW CWI
CW
CR
CR
S
30"
160394 REV B
EP
C
C
CA
-90˚
-45˚
+45˚
OPTIONAL AGITATOR
AND DRIVE ORIENTATIONS
+90˚
A I.D. A I.D.
B
B
12" MINIMUM
HEIGHT CLEARANCE
F
TOP VIEW
TOP VIEW
6" MINIMUM
HIEGHT CLEARANCE
G
AGITATOR EMERGENCY STOP
EMERGENCY
STOP
B
EMERGENCY STOP
AGITATOR TILT
CONTROLS
D*
CA
DROP
VALVE
DROPDOWN
DOWN VALVE
CONTROL
CONTROL
D
E
E*
TEMPERATURE
SENSOR
STAINLESS STEEL
FLOOR FLANGE
3" MINIMUM
CLEARANCE
CA
CA
CWT
S
CW, HW
CWO
IWT
EPCWI
CR, IW,
3" AIR OPERATED DROP DOWN
3" AIR VALVE
OPERATED
DROP DOWN VALVE
EP
CW, HW
CWO
CR, IW, CWI, S
STAINLESS STEEL
FLOOR FLANGE
TEMPERATURE
SENSOR
SIDE VIEW
FRONT VIEW
PHYSICAL DIMENSIONS 3" MINIMUM CLEARANCE
B
TEMPERATURE
SENSOR
B
* OTHER HEIGHTS AVAILABLE,
CONSULT FACTORY.
FRONT VIEW
SIDE VIEW
RECOMMENDED CLEARANCES
MODEL
A
PHYSICAL DIMENSIONS
INA/3-100RTO
MODEL
INA/3-150RTO
25-1/2"
INA/2-100
34"
INA/2-150
INA/2-200
INA/3-200RTO
INA/3-300RTO
36"
A
INA/2-50
B
B
42"
45-1/2"
51-1/2"
C
D
56"
74"
D*
53-1/2"*
E
57-3/4"
79"
59-1/2"
63-3/4"
62"
31-1/2"
48-3/4"
70"
40"
55"
74"
36"
42"
58"
42"
48"
63"
48"
57-1/2"
54"
63-1/2"
WATER INLET
COLD POTABLE
NPT
WATER 3/4"
INLET
1/4" NPT
CONNECTION
CW
CW
COLD POTABLE
INLET
COMPRESSED
AIR
CONNECTION
DESCRIPTION
INLET 1/4" NPT
50"
84"
68"
G
RIGHT
69-3/4"
65-1/2"
54"
89"
74"
F
RECOMMENDED CLEARANCES RIGHT
75-3/4"
71-1/2"
12"
12"
52"
LEFT
58"
12"
12"
64"
12"
12"
12"
12"
12"
12"
12"
12"
82"
60"
12"
12"
12"
84"
62"
12"
12"
12"
* OTHER HEIGHTS AVAILABLE, CONSULT FACTORY.
REAR
12"
12"
12"
70"
LEFT
REAR
* OTHER HEIGHTS AVAILABLE, CONSULT FACTORY.
UTILITY CONNECTIONS
(ALL MODELS)
SYMBOL
CA
CA
COMPRESSED AIR
E
*
C
UTILITY CONNECTIONS (ALL MODELS)
SYMBOL
DESCRIPTION
*
3/4" NPT
HW
HW
HOT POTABLE
WATER INLET
HOT 3/4"
POTABLE
NPT
WATER INLET
3/4" NPT
CWI
CWO
CWI
COOLING WATER
OUTLET
COOLING
WATER
3/4"
NPT
INLET
IW
INDIRECT WASTE
COOLING
3/4"OUTLET
NPT WATER
3/4" NPT
CR
IW
CWO
COOLING WATER
INLET
S
CONDENSATE
RETURN
CR
CWT
EP
STEAM INLET
S
EPCOLD WATER
POWER SUPPLY
TILT INLET
INDIRECT
CONDENSATE 1" NPTSTEAM INLET 3/4" POWER SUPPLY
3/4"
NPT WASTE 3/4" NPT
1/2" NPT
3/4" NPT
RETURN
3/4" NPT
3/4" NPT
1" NPT
IWT
INDIRECT WASTE
TILT OUTLET
1/2" NPT
3/4"
UTILITY REQUIREMENTS
UTILITY REQUIREMENTS
MODEL
AIR AIR POTABLE WATER
COMPRESSED
MODELCOMPRESSED
WATER
INLET
POTABLE
INLET
1 CFM @ 180-90
INA/3-100RTO
INA/2-50
CFM @ PSI
80-90 PSI 10 GPM10 GPM
INA/3-150RTO
1 CFM @ 80-90 PSI
INA/3-200RTO
1 CFM @ 80-90 PSI
INA/2-100
INA/2-150
1 CFM @ 80-90 PSI
1 CFM @ 80-90 PSI
INA/3-300RTO
INA/2-200
1 CFM @ 80-90 PSI
1 CFM @ 80-90 PSI
10 GPM
10 GPM
10 GPM
10 GPM
10 GPM
10 GPM
COLD TILT
COLD WATER
WATER TILT
4060PSI
PSI MIN.
MIN.
INDIRECT
COOLING
STEAM
COOLING
WATER
INDIRECT WASTE
WATER
15 GPM
15 GPM
WASTE
15 GPM
10 GPM
60 PSI MIN.
15 GPM
10 GPM
40 PSI MIN.
60 PSI MIN.
40 PSI MIN.
15 GPM
15 GPM
15 GPM
15 GPM
STEAM
SHIPPING WEIGHT
OPERATING WEIGHT
SHIPPING WEIGHT
OPERATING WEIGHT
15-90 PSI ELECTRICALELECTRICAL
208/3/60 @ 7.8A
10 GPM
60 PSI MIN.
40 PSI MIN.
15-100 PSI
10 GPM
208/3/60 @ 6A 1,190 LBS
430 LBS/HR
240/3/60 @ 6.8A
950 LBS
10 GPM
980 LBS/HR @ 100 PSI
240/3/60 @ 5.2A
@ 90 PSI 480/3/60 @ 3.4A
480/3/60 @ 2.6A
1335 LBS/HR @ 100 PSI
10 GPM
1743 LBS/HR @ 100 PSI
10 GPM
2206 LBS/HR @ 100 PSI
10 GPM
208/3/60 @ 7.8A
240/3/60 @ 6.8A
208/3/60
480/3/60 @ 3.4A
240/3/60
@ 7.8A1,545 LBS
700 LBS/HR
@ 6.8A
@ 90 PSI 208/3/60 @ 11A
480/3/60 @ 3.4A
240/3/60 @ 9.6A
208/3/60 @ 11A 1,795 LBS
1,190 LBS
480/3/60 @ 4.8A
900 LBS/HR
240/3/60 @ 9.6A
480/3/60 @ 4.8A
@ 90 PSI 208/3/60 @ 11A
1,545 LBS
1200 LBS/HR
@ 90 PSI
1,795 LBS
240/3/60 @ 9.6A
1,945 LBS
208/3/60 @ 11A
480/3/60 @ 4.8A
240/3/60 @ 9.6A
480/3/60 @ 4.8A
1,225 LBS* OTHER HEIGHTS
1,810 LBS
2,550 LBS
AVAILABLE,
CONSULT
FACTORY.
1,810 LBS
3,030 LBS
2,550 LBS
3,700 LBS
3,030 LBS
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising