Power Soak | PPA2B-66L/R | Spec sheet | Power Soak PPA2B-66L/R Spec Sheet

Power Soak PPA2B-66L/R Spec Sheet
PROJECT NAME:
LOCATION:
ITEM NO:
POWER PREP
QTY:
ADVANCED FREE FLOWING WASH ACTION
MODELS PPA2B-66L/R
The Power Prep provides patented, free flowing wash action, reaching hard to reach areas on produce in a
2-bay configuration. NSF approved for washing whole, uncut and cut, unpeeled, fruits and vegetables.
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
AVAILABLE MODELS:
PPA2B-66L-115-1
PPA2B-66L-208-1
PPA2B-66L-230-1
PPA2B-66R-115-1
PPA2B-66R-208-1
PPA2B-66R-230-1
STANDARD SPECIFICATIONS:
• Left to right (L) or right to left (R) configurations
• Patented wash flow design allows for washed
produce to be automatically collected into the
stainless steel unloading baskets
• Removable wash jet channel
• Removable wash pump intake screen
• Three positional reverse flushing system of wash
pump housing, wash pump impeller and wash pump
manifold
• Hemmed end splash
• 18” Solid drain board
• Wash tank available as 2 bay only
• 30” Clean drain board
• 1/2” faucet with pre-rinse
• 1-1/2” Ball drain valve
• Custom configurations available, including tabling,
shelving, and accessories
• Low profile wash jets average every three inches
along the back wall of wash tank above the wash
tank intake with removable jet block – wash jets
provide free flowing uniform wash action
• Wash tank to have ultra-high molecular weight
polyethylene (UHMW) flexible tank dividers,
(UHMW) wash tank bay flow guides, high density
polyethylene (HDPE) rib system integrally connected
with stainless steel rods
• Stainless steel self-draining pump housing and
impeller, all wetted parts of the pump assembly are
stainless steel
• Wash tanks supported by 1-5/8” stainless diameter
legs with 1-1/4” stainless cross members and
adjustable stainless steel bullet feet
• Type 304 stainless steel construction throughout
tanks, drain boards, splashes and channel rims (14
gauge)
• High quality 1/2” faucet assembly with pre-rinse
spray
• Rear-exit stainless ball valve drain for 100%
drainage
• 3/4 HP heavy duty (TEFC) wash pump motors (high
service factor) are provided with all stainless steel
pump assemblies
• Modular design allows quick and easy access to:
motor, pump and all major components
• 208-240V/60/1, 4.1 Amps, 115V/60/1, 8.4 Amps,
or 220-240V/50/1, 4.8 Amps
• Flow guides
CONTROLS:
PS-50: Pistol Grip ON/OFF mechanical Start/Stop
switch
WARRANTY:
• Three year parts and three year labor warranty from
the date of shipping (USA only)
• Flow guides 1 year
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
OPTIONAL ACCESSORIES:
Stainless steel backsplash
extensions
Unload baskets
Strainer for unload basket
Over and under shelves
Fry cutter basket
Power Prep
44926 RevA
Revised 04/17/18
PPA2B-66L/R
®
220-240V/60/1, 4.1 AMPS
115V/60/1, 8.4 AMPS
220-240V/50/1, 4.8 AMPS
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising