Power Soak PPI3B-75L/R Spec Sheet

Add to my manuals
2 Pages

advertisement

Power Soak PPI3B-75L/R Spec Sheet | Manualzz
PROJECT NAME:
LOCATION:
ITEM NO:
POWER PREP
QTY:
INTRO FREE FLOWING WASH ACTION 3-BAY
MODELS PPI3B-75L/R
The Power Prep provides patented, free flowing wash action, reaching hard to reach areas on produce in a
3-bay configuration. NSF approved for washing whole, uncut, unpeeled fruits and vegetables.
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
AVAILABLE MODELS:
PPI3B-75L-115-1
PPI3B-75L-208-1
PPI3B-75L-230-1
PPI3B-75R-115-1
PPI3B-75R-208-1
PPI3B-75R-230-1
STANDARD SPECIFICATIONS:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Left to right (L) or right to left (R) configurations
Hemmed end splash
18” Solid drain board
30” Clean drain board
1-1/2” Ball drain valve
Patented wash flow design allows for washed
produce to be automatically collected into the
stainless steel unloading baskets
3-bay wash tanks include 1 unload basket
Custom configurations available, including tabling,
shelving, and accessories
Low profile wash jets average every 3 inches along
the back wall of wash tank above the wash tank
intake – wash jets provide free flowing uniform wash
action
Wash tank to have ultra-high molecular weight
polyethylene (UHMW) flexible tank dividers,
(UHMW) wash tank bay flow guides, high density
polyethylene (HDPE) rib system integrally connected
with stainless steel rods
Stainless steel self – draining pump housing and
impeller, all wetted parts of the pump assembly are
stainless steel
Wash Tanks supported by 1-5/8” stainless diameter
legs with 1-1/4” stainless cross members and
adjustable stainless steel bullet feet
Type 304 stainless steel construction throughout
tanks, drain boards, splashes and channel rims (14
gauge)
High quality 1/2” faucet assembly with pre-rinse
spray
• Rear-exit stainless ball valve drain for 100%
drainage
• 3/4 HP heavy duty (TEFC) wash pump motors (high
service factor) are provided with all stainless steel
pump assemblies
• Modular design allows quick and easy access to:
motor, pump and all major components
• 208/230V, 1-phase, 5.2/4.8 Amps or 115V,
1-phase, 8.4 Amps
• Flow guides
CONTROLS:
PS-50: Pistol Grip ON/OFF mechanical Start/Stop
switch
WARRANTY:
• Three year parts and three year labor warranty from
the date of shipping (USA only)
• One year flow guide warranty
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
OPTIONAL ACCESSORIES:
Stainless steel backsplash
extensions
Unload baskets
Strainer for unload basket
Over and under shelves
Power Prep
45478 RevA
Revised 04/17/18
PPI3B-75L/R
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement