Power Soak | PSI6-L/R | Spec sheet | Power Soak PSI6-L/R Spec Sheet

Power Soak PSI6-L/R Spec Sheet
PROJECT NAME:
LOCATION:
POWER SOAK SYSTEM
INTRO CONTINUOUS POT, PAN & SHEET PAN
WASHING SYSTEM MODELS PSI6-L/R
The Power Soak Intro System is a pre-configured three-bay continuous pot, pan and sheet washing system.
The patented Parallel Wash System’s washing wave action, with wash jets located every 6 inches along the
back wall of the wash tank, continuously rotates wares from the back of the wash tank up to the operator in hot
soapy water that removes baked-on food soils, providing unparalleled results with an excellent ROI.
AVAILABLE MODELS:
PSI6-84L-30
PSI6-96L-36
PSI6-108L-42
PSI6-120L-48
PSI6-84R-30
PSI6-96R-36
PSI6-108R-42
PSI6-120R-48
STANDARD SPECIFICATIONS:
• One-piece construction made of 14-gauge, 304
stainless steel
• Conforms to ANSI/NSF Standard 2 with Heliarc (TIG)
welds
• 30” front to back depth
• 1-½” front-channel rim with back splash to be 8”
over all height with hemmed end splashes
• Pre-configured system includes 12” Scrap Sink
• Wash Tank includes a self-draining, 2 HP, 115 volt
/ single-phase wash motor with patented Parallel
Wash System
• Incorporates low-profile wash jets every 6” along the
back wash tank wall and above the stainless steel
wash pump intake manifold (which run the full length
of the rear of the tank below wash jets) (sheet pan
racks not available)
• System includes Rinse and Sanitizer Tanks with clean
drain board
• Bottom of tanks are manufactured to facilitate ease
of draining
• System includes ½” pre-rinse assembly
• System does not include faucets or drains, but is
pre-cut with holes to accommodate faucet and drain
hardware, see drawing
• Wash tank heat not available
INSTALLATION REQUIREMENTS:
• Unit requires hot and cold water, and drain
connections
• Single point with 208 or 230 volt / single-phase
electrical connection
• Direction of operation may be configured left-toright or right-to-left
ELECTRICAL CONNECTION OPTIONS:
208V/60/1, 8.8 Amps
230V/60/1, 8.3 Amps
WARRANTY:
• 1 years for parts and labor
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
ITEM NO:
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION:
11400
Shown with removable stainless
steel sheet pan rack system.
OPTIONAL ACCESSORIES:
Faucets and drains
Advanced Wash Insert (AWI)
consisting of (1) ultra-high
molecular weight polyethylene
(UHMW) flexible tank divider,
or (2) with sheet pan racks,
(UHMW) wash tank flow guides,
high density polyethylene
(HDPE) rib system integrally
connected with sst rods and
1/8” thick UHMW tank liner
form fitting to bottom of wash
tank — changes wash jet
location to every 3” along the
back wall
Power utensil basket
CONTROLS:
PS-50: Simple on/off control
Power Soak System
44931 RevF
Revised 04/24/19
PSI6-L/R
CONFIGURATIONS OF UNIT FROM LEFT TO RIGHT
Length
PSI6-84L-30
84"
PSI6-96L-36
96"
PSI6-108L-42
108"
PSI6-120L-48
120"
Flow
Left to Right
Part No.
End Splash
Scrap Sink
Wash Tank
Rinse Tank
Sanitzer Tank
Clean Drain
Board
End Splash
Hemmed
12"
30" x 21”
14" x 16"
14” x 16”
14"
Hemmed
Hemmed
12"
36" x 21”
14” x 16”
14” x 16”
20"
Hemmed
Hemmed
12"
42" x 21”
20" x 16"
20” x 16”
14"
Hemmed
Hemmed
12"
48" x 21”
20” x 16”
20” x 16”
20"
Hemmed
CONFIGURATIONS OF UNIT FROM LEFT TO RIGHT
Length
PSI6-84R-30
84"
PSI6-96R-36
96"
PSI6-108R-42
108"
PSI6-120R-48
120"
Flow
Right to Left
Part No.
End Splash
Clean Drain
Board
Sanitzer Tank
Rinse Tank
Wash Tank
Scrap Sink
End Splash
Hemmed
14"
14” x 16”
14” x 16”
30" x 21”
12"
Hemmed
Hemmed
20"
14” x 16”
14” x 16”
36" x 21”
12"
Hemmed
Hemmed
14"
20” x 16”
20” x 16”
42" x 21”
12"
Hemmed
Hemmed
20"
20” x 16”
20” x 16”
48" x 21”
12"
Hemmed
888-994-7636, unifiedbrands.net
© 2019 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
PSI6-L/R
SAMPLE CONFIGURATION:
888-994-7636, unifiedbrands.net
© 2019 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising