Power Soak | PS-225 | Spec sheet | Power Soak PS-225 Spec Sheet

Power Soak PS-225 Spec Sheet
PROJECT NAME:
LOCATION:
INTELLIGENT CONTROLS
MODEL PS-225
ITEM NO:
QTY:
MODEL NO:
For Power Soak Advanced System
AIA NO:
SIS NO:
CSI SECTION: 11400
TECHNICAL SPECIFICATIONS:
• Thermal overload is solid state, automatic and is
located in control panel
• Membrane style flush touch controls
• Solid state controls and contactors
• Automatic wash tank heat standard
• Monitor high water sensor - wash tank
• Monitor low water sensor - wash tank
• Monitor high water sensor - sanitizer tank
• Monitor low water sensor - sanitizer tank
• Forced water change every 4 hours. Wash action
stops and another cycle can not be restarted until
wash tank is drained below the low sensor in the
wash tank.
• Optional (punitive wash action/forced) sanitizer fluid
change 1-4 hours
• Shared error reporting code and power LED
• Optional automatic integrated chemical dispensing
• Batch processing logic coupled with green ultra
bright LED unload/load alert light
• Blue ultra bright LED alert light flashes on floor when
wash tank needs to be changed
• Red ultra bright LED alert light flashes on floor when
sanitizer tank needs to be changed
• Orange ultra bright LED alert light flashes on floor
when wash fluid is above 120ºF
• Intelligent wash cycle - actual cumulative wash cycle
time is tracked and the standard four hour wash
period will be expanded to up to six hours when
appropriate
• Improper fill alert/error - this feature is
used when a customer is filling the wash or
sanitizer with a pre-mixed water and chemical
blend system. If straight tap water is used to
supplement the filling the system will call an
error and force a water change.
• Full tank alert system - this system alerts the
rgm and crew members when the wash or
sanitizer are approaching full and/or full with
either alternating ultra bright blue and green or
red and green alert lights
• Led’s indicate when wash and/or sanitizer
tanks need to be filled or drained. Compliance
enforced with punitive wash action lockout.
• Wireless remote ultra bright LED alert light
system - this system is 24 volts and can be
located up to 100 feet away from the power
soak with up to two wall obstructions
ORIGIN OF MANUFACTURE:
Designed and manufactured in the United States.
Intelligent Controls
44922 RevA
Revised 01/18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising