iogear GW4K30GH60 User guide

iogear GW4K30GH60 User guide
Quick Start Guide
60GHz Wireless 4K @ 30Hz
Video Extender
GW4K30GH60
PART NO. Q1577
www.iogear.com
Package Contents
1 x HDMI Extender Transmitter
1 x HDMI Extender Receiver
1 x IR Blaster Cable
1 x IR Receiver Cable
2 x 5 VDC/2A Switching Power Supply
1 x Quick Start Guide
1 x Warranty Card
2 x HDMI Cables
System Requirements
1 HDMI source device (Bluray, Satellite box, PC etc.)
1 HDMI display device (HDTV, projector with HDMI port, etc.)
1
2
Overview
Transmitter
A. Power input
B. HDMI input
C. Power input with USB (optional)
D. Data transmission indicator
E. Power indicator
F. SET button
A
B
C
D
E
F
Receiver
G. Power input
H. HDMI output
I. Power input with USB (optional)
J. Data transmission indicator
K. Power indicator
L. SET button
G
H
I
J
K
L
3
Hardware Installation
Transmitter
STEP 1
Connect the included HDMI cable to your video source
(such as laptop, projector or Bluray player) HDMI output port.
STEP 2
Connect the other side of your cable to the HDMI input port on your
GW4K30GH60 transmitter.
STEP 3
The GW4K30GH60 is unique in that it has an option for dual power
input. Using the included power adapter, plug the power supply
cable into the power inlet port. For optional method, if you have a
USB-A to micro USB cable you can plug the USB-A male into your
USB port (if it has one) on your video source device such as your
laptop, satellite box or your Bluray player. Plug the micro USB (the
other end of the cable) to your transmitter and the transmitter
should now be powered up.
3
2
3
1
al)
on
ti
(op
4
Hardware Installation
Receiver
STEP 4
Connect the included HDMI cable to your TV vacant HDMI port.
STEP 5
Connect the other side of your cable to the HDMI output port on
your GW4K30GH60 receiver.
STEP 6
Using the included power adapter, plug the power supply cable into
the power inlet port. For optional method, if you have a USB-A to
micro USB cable you can plug the USB-A male into your USB port
(if it has one) on your TV or projector. Plug the micro USB to your
receiver and the receiver should now be powered up. Make sure
that this port on your TV/projector can supply power and is not a
firmware upgrade port.
6
5
6
4
l)
na
tio
(op
Hardware Installation
5
These devices operate in line-of-site mode only. 60 GHz signals will NOT go
through walls or any obstructions and is intended for same room use only.
However the advantage over 2.4 and 5GHz bands is that there is zero latency
and the video is uncompressed which makes this device ideal for gamers
where latency is number one concern. Video streaming is pure 4K @ 30 Hz
taking advantage of HDMI 2.0 with HDCP 2.2 compliant. Wireless connection
indicator of the transmitter and receiver will light up when the transmitter and
receiver is established wirelessly. Please wait up to 1 minute for connection to
be established.
If your video source and your display is on, you should be able to see the
content of the source on your display
NOTE: Distances may vary depending on environment.
FAQ
6
Q Transmitter and receiver will not connect wirelessly
A 1. Please check if the wireless connection light is on and blinking
2. Restart the transmitter and receiver by starting the transmitter first, then
receiver in that order. You can also press the transmitter “set” button and
then the receiver “set” button to establish connection
3. Reconnect HDMI cables make sure they can support 4K resolution or use
the cables that came with the kit
Q The wireless indicator is on but nothing on the display
A Please check and see if the video source is working correctly by connecting the
HDMI cable from the video source directly to the display and see if the
operation is now normal
Q Video is flickering or not stable
A 1. Change the position of the transmitter and receiver and make sure that
they are within the specified operating distance
2. Restart the transmitter and receiver
3. Reconnect the HDMI cables
4. Check for any obstacles that may block the wireless signal from the
transmitter to the receiver
Compliance Information
WARNING: This product can expose you to chemicals including styrene
which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital service, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications made to this equipment may void the
user’s authority to operate this equipment. This equipment generates, uses, and
can radiate radio frequency energy. If not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Limited Warranty
This product carries a 1 Year Limited Warranty. For the terms and conditions
of this warranty, please go to https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
https://iogear.custhelp.com
[email protected]
www.iogear.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement