Integra | DPC-6.1 | Owner Manual | Integra DPC-6.1 Blu-ray / DVD Player Owner Manual

Integra DPC-6.1 Blu-ray / DVD Player Owner Manual
Contents
Before Using Your DVD Changer
Getting Started
2
6
DVD/VIDEO CD/CD CHANGER
DPC-6.1
Connections
10
Basic Playback
14
Advanced Playback
21
Function Setup
32
Instruction Manual
Thank you for purchasing the Integra DVD Changer.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable you
to obtain optimum performance and listening
enjoyment from your new DVD Changer.
Please retain this manual for future reference.
Others
40
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Important Safeguards
1.
2.
Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions - The safety and operating instructions
should be retained for future reference.
3.
Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4.
Follow Instructions - All operating and use instructions should
be followed.
5.
Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.
PORTABLE CART WARNING
Carts and Stands - The appliance
should be used only with a cart
or stand that is recommended by
the manufacturer.
6.
6A. An appliance and cart combination should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination
to overturn.
7.
8.
9.
S3125A
Wall or Ceiling Mounting - The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on
a bed, sofa, rug, or similar surface that may block the ventilation openings; or if placed in a built-in installation, such as
a bookcase or cabinet that may impede the flow of air
through the ventilation openings, there should be free space
of at least 5 cm (2 in.) and an opening behind the appliance.
Heat - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Polarization - If the appliance is provided with a polarized
plug having one blade wider than the other, please read
the following information:
The polarization of the plug is a safety feature. The polarized
plug will only fit the outlet one way. If the plug does not fit
fully into the outlet, try reversing it. If there is still trouble, the
user should seek the services of a qualified electrician. Under no circumstances should the user attempt to defeat the
polarization of the plug.
12. Power-Cord Protection - Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, especially near plugs,
convenience receptacles, and the point where they exit
from the appliance.
2
13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
14. Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions.
All other servicing should be referred to qualified service personnel.
Precautions
CAUTION:
For Canadian model
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. DO NOT STARE INTO BEAM.
For models having a power cord with a polarized plug:
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
Modele pour les Canadien
Sur les modeles dont la fiche est polarisee:
ATTENTION:
For U.S. model
The laser is covered by a housing which prevents exposure during operation or maintenance. However, this product is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the Food and Drug
Administration.
According to their regulations 21 CFR section 1002.30, all
manufactures who sell Laser Products must maintain records of
written communications between the manufacturer, dealers and
customers concerning radiation safety. If you have any
complaints about instructions or explanations affecting the use
of this product, please feel free to write to the address on the
back page of this manual. When you write us, please include
the model number and serial number of your unit.
POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
REMARQUE: CET APPAREIL NUMÉRRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
In compliance with Federal Regulations, the certification,
identification and the period of manufacture are indicated on
the rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful inter ference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful inter ference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
3
Precautions
1. Regional restriction codes (region number)
Regional restriction codes are built-in to DVD Changers and
DVD videos for each sales region. If the regional code of the
DVD Changer does not match one of the regional codes of
the DVD video, playback is not possible.
The region number can be found on the rear panel of the
DVD Changer. (e.g:
Region 1)
2. About This Manual
This manual explains the basic procedures for operating your
DVD Changer. Some DVD videos do not support the full
potential of the DVD technology. Your DVD Changer may
therefore not respond to all operating commands. Refer to
instruction notes on discs.
A “ ” mark may appear on the TV screen during operation.
It means that the operation is not permitted by the DVD
Changer or the disc.
3. Warranty Claim
You can find the serial number on the rear panel of this unit. In
case of warranty claim, please report this number.
4. Recording Copyright
Recording of copyrighted material for other than personal
use is illegal without permission of the copyright holder.
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE
FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according
to country or region. Be sure that the power supply voltage of
the area where this unit will be used meets the required
voltage (e.g., AC 120 V, 60 Hz) written on the rear panel.
6. Do not touch this unit with wet hands
Do not handle this unit or power cord when your hands are
wet or damp. If water or any other liquid enters the case, take
this unit to an authorized service center for inspection.
7. Location of this unit
• Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides
of this unit especially when it is placed in an audio rack. If
ventilation is blocked, this unit may overheat and malfunction.
• Do not expose this unit to direct sunlight or heating units as
this unit's internal temperature may rise and shorten the life of
the pickup.
• Avoid damp and dusty places and places directly affected
by vibrations from the speakers. In particular, avoid placing
the unit on or above one of the speakers.
• Be sure this unit is placed in a horizontal position. Never place
it on its side or on a slanted surface as it may malfunction.
• When you place this DVD Changer near a TV, radio, or VCR,
the playback picture may become poor and the sound may
be distorted. In this case, place the DVD Changer away from
the TV, radio, or VCR.
8. Care
From time to time you should wipe the front and rear panels
and the cabinet with a soft cloth. For heavier dirt, dampen a
soft cloth in a weak solution of mild detergent and water, wring
it out dry, and wipe off the dirt. Following this, dry immediately
with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical
solvents or cloths since these could damage the finish or
remove the panel lettering.
4
9. Notes on Handling
• When shipping the DVD Changer, use the original shipping
carton and packing materials. For maximum protection,
repack the unit as it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the DVD
Changer. Do not leave rubber or plastic products in contact
with the DVD Changer for a long time. They will leave marks
on the finish.
• The top and rear panels of the DVD Changer may become
warm after a long period of use. This is not a malfunction.
• When the DVD Changer is not in use, be sure to remove the
disc and turn off the power.
• If you do not use the DVD Changer for a long period, the unit
may not function properly in the future. Turn on and use the
DVD Changer occasionally.
10. To Obtain a Clear Picture
The DVD Changer is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use
depending on the operating environment. For details, contact
your nearest dealer.
11. Notes on Moisture Condensation
Moisture condensation damages the DVD Changer.
Please read the following carefully.
Moisture condensation occurs, for example, when you pour
a cold drink into a glass on a warm day. Drops of water form
on the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside this unit, one of
the most crucial internal parts of the DVD Changer.
• Moisture condensation occurs in the following cases.
- When you bring the DVD Changer directly from a cold place
to a warm place.
- When you use the DVD Changer in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
- In summer, when you use the DVD Changer in a hot and humid
place just after you move the unit from an air conditioned
room.
- When you use the DVD Changer in a humid place.
• Do not use the DVD Changer when moisture condensation
may occur.
If you use the DVD Changer in such a situation, it may damage
discs and internal parts. Remove the disc, connect the power
cord of the DVD Changer to the wall outlet, turn on the DVD
Changer, and leave it for two or three hours. After a few hours,
the DVD Changer will have warmed up and evaporated any
moisture. Keep the DVD Changer connected to the wall outlet
and moisture condensation will seldom occur.
Table of Contents
Important Safeguards/Precautions/Table of Contents ............................................................................................. 2–5
Getting Started
Features......................................................................... 6
Supplied Accessories .................................................. 7
Preparing the Remote Controller ................................ 8
Installing the remote controller batteries ............. 8
Using the remote controller ................................... 8
Disc Compatibility and Handling ............................... 9
Discs You can Use ................................................... 9
Handling Discs .........................................................
Cleaning Discs .........................................................
Storing Discs .............................................................
About VIDEO CDs ...................................................
Notes on Copyright ................................................
9
9
9
9
9
Connections
Connecting the DPC-6.1 to a TV ............................... 10
Connecting the DPC-6.1 to a TV ......................... 10
Connecting to an Audio System and TV with
COMPONENT VIDEO Inputs ....................................... 11
Other Audio Playback Options ................................. 12
Connecting to an Amplifier Equipped with
a Dolby Digital Decoder ...................................... 12
Connecting to an Amplifier Equipped with
Dolby Pro Logic Surround ..................................... 12
Connecting to an Amplifier Equipped with
a DTS Decoder ...................................................... 13
Connecting to an Amplifier Equipped with
a Digital Audio Input ............................................. 13
Basic Playback
Playing back Discs ..................................................... 14
Basic Playback ...................................................... 14
Direct Playback, Stop and Pause ....................... 16
Fast Reverse and Fast Forward Playback .......... 16
Slow-Motion Playback .......................................... 17
Resuming Playback From the Desired Location 17
Locating Titles, Chapters, or Tracks .......................... 18
Locating a Title Using the Title Menu .................. 18
Title Selection with the Numeric Buttons ............ 18
Selecting Chapters or Tracks ............................... 19
Selecting a Precise Scene or Audio Passage ......... 20
Entering the Time Location .................................. 20
Advanced Playback
Repeat Functions ....................................................... 21
Repeating a Title or Chapter/Track .................... 21
Repeating a Given Scene or Passage ............... 21
Setting the Desired Playback Order ......................... 22
Programming Memory Sequences ..................... 22
Additional Playback Functions ................................. 24
Next Selection: Preparing the next
Audio Track ............................................................ 24
Using the DVD Changer as CD player ............... 25
Random Playback ................................................ 26
DVD Video Functions ................................................. 27
Zooming in ............................................................. 27
Changing the Camera Angle ............................. 27
Audio Playback Settings ...................................... 28
Using the Subtitle Feature .................................... 30
Using The On-Screen Display Functions ................... 31
Requesting Basic Information .............................. 31
More Specific Information:
Remaining Time and Setting Status .................... 31
Function Setup
32
32
34
35
36
DISPLAY Settings..................................................... 37
OPERATION Settings .............................................. 37
Table of Languages ................................................... 39
Table of Languages and Their Abbreviations .... 39
Troubleshooting .......................................................... 40
Symptoms and Corrections ................................. 40
Identification of Controls ........................................... 41
Front Panel ............................................................. 41
Rear Panel ............................................................. 41
Display .................................................................... 42
Remote Controller ................................................. 43
Specifications ............................................................. 44
DVD Changer/Outputs ........................................ 44
Advanced Settings ....................................................
Setting Procedure .................................................
LANGUAGE Functions ...........................................
PICTURE Settings ....................................................
AUDIO Settings ......................................................
Others
5
Features
■ Highlights that Set the DPC-6.1
•
•
•
•
•
•
•
•
Dolby* Digital Audio Output
6-Disc playback
DTS** Compatibility
Video CD playback
Full 96-kHz/24-bit resolution with 96-kHz/24-bit discs
Direct digital path for signal purity
Enhanced black-level setting
Next Selection
■ Video Features
• DTS Compatibility means the DPC-6.1 can pass a DTSencoded digital signal from discs with DTS soundtracks
to an external processor or receiver with a DTS decoder
• Advanced 10-Bit 27 MHz Video D/A Conversion for
four times the accuracy of conventional 8-bit, 13.5
MHz systems
• Gold-Plated Component-Video Output to realize the
full potential of DVDs
• 3-Mode Picture Magnification enables you to “zoom”
in and enlarge in three steps 25 selected areas of the
picture
• Enhanced Black-Level Control lets you set the
reference black threshold cutoff-especially useful for
picture calibration on TVs
• Passes PLUGE Signals to make it easier for you to set
the brightness of your monitor when using DVD test discs
• Video CD Playback for enjoying the wide selection
of inexpensive Video-CD software, which has the
same high audio quality as MiniDiscs, and picture
quality comparable to VHS video cassettes
• High Resolution Onscreen Display
• S-Video Output
• Full-Time Active Video Outputs to make using the DVD
changer with both the main home-theater television
and the display in the bedroom much easier
• 4-Mode Search (title, DVD chapter, CD track, and time)
• Still Frame to view single frames
• Frame Advance
• Slow Motion for DVD playback without sound at 1/2,
1/4, or 1/8th the normal speed
• Fast Forward/Reverse (x2, x8, x30)
• Last Memory Play function for both DVDs and CDsresumes play from where last stopped, even if the
power was turned off
• 6-Mode Repeat allows you to repeat titles, chapters,
tracks, all tracks, memory, and a user-selected A-B
section on DVDs and CDs
• Programmed Memory Playback
• Random Playback
• Multi-Aspect Ratio
• 8-Language Soundtrack Capability
• 32 Subtitle Languages
• Multi-Camera Angle
• Parental Viewing Control
• Screen Saver
6
■ Audio Features
•
•
•
•
•
•
Audiophile-Class Audio Performance
Direct Digital Path
Full 96-kHz/24-Bit Audio Resolution
Digital Audio Output (coaxial)
Optical Digital Audio Output
1 Pair of Analog Outputs (RCA)
■ Other Features You’ll Enjoy
•
•
•
•
•
•
•
•
•
5-Disc Exchange
CD Mode (DVD Skip) Control
Next Selection
Direct Disc Access
Separate indicators for Each Disc (1 to 6)
Dual-Focus Optical Pickup
Dynamic Range Control
Large, Bright, Universal Fluorescent Display
2-Mode Display Dimmer (normal, dim)
• Anti-Resonant, Heavy-Gauge, Reinforced-Steel
Chassis
• Large Anti-Resonant Feet
• Heavy-Duty Power Cord
• Brushed Aluminum Front Panel
• 54-Key Full-Function Remote Control
* Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol
are trademarks of
Dolby Laboratories. Confidential Unpublished Works. ©19921997 Dolby Laboratories, Inc. All rights reserved.
** “DTS” and “DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc.
Supplied Accessories
After unpacking, check whether the box contains all items listed below.
If anything is missing, contact the ONKYO/Integra dealer where you bought the DVD Changer.
The number of accessories is indicated in brackets.
Getting Started
REMOTE
CONTR
OLLER
RC -426
DV
Batteries for the remote controller
(size AA/UM-3) [2]
S video cable [1]
Power cable [1]
Basic Playback
Audio/video connection cable [1]
Connections
Remote controller (RC-426DV) [1]
Advanced Playback
Function Setup
Others
7
Preparing the Remote Controller
Installing the remote controller batteries
1
1. Remove the battery compartment cover by pressing
and sliding it away from the remote controller unit.
2. Insert two AA (R6- or UM-3)-size batteries into the
battery compartment. Carefully follow the polarity
diagram (positive (+) and negative (–) symbols)
inside the battery compartment.
3. After batteries are installed and seated correctly,
replace the compartment cover.
2
Notes:
• Do not mix new batteries with old batteries or
different kinds of batteries.
• To avoid corrosion, remove the batteries if the
remote controller is not to be used for a long time.
• Remove dead batteries immediately to avoid
damage from corrosion. If the remote controller
doesn’t operate smoothly, replace both the batteries
at the same time.
• The life of the batteries supplied is about six months
but this will vary depending on usage.
3
Using the remote controller
Point the remote controller toward the remote control
sensor.
DPC-6.1
Remote control sensor
30
30
approx. 5 m
(16 feet)
REMOTE
CONTROLLER
RC-426
8
DV
Notes:
• Place the unit away from strong light such as direct
sunlight or inverted fluorescent light which can
prevent proper operation of the remote controller.
• Using another remote controller of the same type in
the same room or using the unit near equipment
which uses infrared rays may cause operational
interference.
• Do not put any object such as a book on the remote
controller. The buttons of the remote controller may
be pressed by mistake and drain the batteries.
• Make sure the audio rack doors do not have colored
glass. Placing the unit behind such doors may
prevent proper remote controller operation.
• If there is any obstacle between the remote controller and the remote control sensor, the remote
controller will not operate.
Disc Compatibility and Handling
In this section, you will learn which discs can be used with your DPC-6.1, and how to handle, clean, and store them.
Discs You can Use
Cleaning Discs
Disc mark
DVD
videos
Contents
Audio
+
Video
(moving
pictures)
Audio +
Video
(moving
pictures)
Audio
CDs
Audio
12 cm
Maximum
playback time
Approx. 4 hours
(single sided disc)
Approx. 8 hours
(double-sided disc)
Approx. 80 minutes
(single-sided disc)
8 cm
Approx. 160 minutes
(double-sided disc)
12 cm
Approx. 74
minutes
8 cm
Approx. 20
minutes
12 cm
Approx. 74
minutes
8 cm
(CD single)
Approx. 20
minutes
Handling Discs
• Never touch the playback side (the “blank” side) of
the disc.
• Do not store discs in places subject to direct sunlight
or near heat sources.
• Do not store discs in places subject to moisture and
dust, such as in a bathroom or near a humidifier.
• Store discs vertically in their case. Stacking or placing
objects on unprotected discs may cause warping
and scratches.
About VIDEO CDs
Your DVD Changer can play back version 1.1 and 2.0
Video CDs. Version 2.0 discs support PBC functionality.
(PBC is the abbreviation of Playback Control.)
• VIDEO CDs not equipped with PBC functionality
(Version 1.1)
Sound and pictures are played back in the same
way as an audio CD.
• VIDEO CDs equipped with PBC functionality
(Version 2.0)
In addition to the functions available for version 1.1
Video CDs, you can use interactive software and
search functions. These are accessible via a menu
displayed on the TV screen (Menu Playback).
However, not all functions described in this Instruction
Manual are supported by all Video CDs.
Playback side
• Never attach paper or tape to discs.
9
Others
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted material without permission.
DVD videos are copy protected, and any copy made
from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing uses, unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Function Setup
Notes on Copyright
Advanced Playback
• Do not use discs that have residue from adhesive
tape, rental discs that have peeling labels, or discs
that have custom labels or stickers. Otherwise, you
may not be able to eject the discs, or the DVD
Changer may become inoperative.
Storing Discs
Basic Playback
• You cannot play back discs other than those listed
above.
• You cannot play back discs such as CD-R, CD-RW,
CD-ROM, DVD-RAM, DVD-RW, etc., even though they
may be labelled with one of the above logos.
• This DVD Changer uses the NTSC color system, and
cannot play back DVD videos recorded in any other
color system (PAL, SECAM, etc.).
• Avoid using heart-shaped or octagonal discs. Playing
irregularly shaped discs may damage the DVD
Changer’s internal mechanism.
• Stubborn dust or dirt can be removed by wiping the
disc lightly with a slightly moistened soft cloth and
finishing with a dry cloth.
• Never use solvents such as thinner, benzine, commercially available cleaners, or antistatic spray for vinyl
LPs. They may damage the disc.
Connections
VIDEO
CDs
Disc
size
• Fingerprints and dust on the disc cause a deterioration of the picture and sound quality. Wipe the disc
from the center outwards with a soft cloth. Always
keep the discs clean.
Getting Started
Your DVD Changer can play back the following discs:
Connecting the DPC-6.1 to a TV
Here is how to connect your DVD Changer to your TV set. In this case, both the video and audio signals will be
played back by your TV set.
Connecting the DPC-6.1 to a TV
1. Switch of f the DVD Changer and the TV set.
2. Connect the DPC-6.1 to your TV set as shown in the illustration.
VIDEO OUTPUT
AC INLET
Y
PB
S VIDEO
PR
VIDEO
Do not plug in the
power cable until
all connections
have been made.
COMPONENT
DIGITAL
OUTPUT
ANALOG
OUTPUT
COAXIAL
OPTICAL
L
R
To ANALOG
AUDIO OUT
Power cable
(included)
(red)
(white)
(yellow)
To wall
outlet
To S VIDEO OUT
To VIDEO OUT
(See below)
Audio/video connection cable
(supplied)
To audio inputs
(red)
Improper connection
(white)
To video input
(yellow)
Signal flow
S video cable (supplied)
To S video input
If the TV has an S video input, connect the DVD
Changer with the supplied S video cable.
Insert completely
TV or monitor with
audio and video inputs
■ Selecting the audio outputs
Your DPC-6.1 provides several options for audio playback: you can use the analog or one of the digital audio
outputs. If the audio is to be played back by your TV set, connect the ANALOG OUTPUTs to the audio inputs of your
TV set and activate them (“Analog 2ch”). See “Audio Settings” on page 36 for details.
Notes:
• See also the instruction manual of the connected TV on how to select the signals transmitted by the DVD Changer.
• Before connecting the DVD Changer to your TV, be sure to turn off the power to and unplug both units from the wall outlet.
• If your TV set has one audio input (monaural), connect a Y cable adapter to the DPC-6.1’s ANALOG OUTPUTs, and the other end
of the adapter to the TV’s audio input.
• Be sure to establish a direct video connection between the DPC-6.1 and your TV set. Do not route the video signal through your
VCR or other video component. Otherwise the picture may be distorted due to the DVD video’s copy protection.
Connecting a power cable
VIDEO OUTPUT
AC I NLET
Y
PB
PR
S VIDEO
VIDEO
COMPONENT
1
ANALOG
OUTPUT
1. Connect the outlet plug on the included power cable
to the AC INLET on the DPC-6.1.
2. Plug-in the other end of the cable to a wall AC outlet.
DIGITAL
OUTPUT
COAXIAL
Notes:
OPTICAL
L
R
2
10
• Do not use any power cable other than the included cable.
The included cable is designed for use only with the DPC-6.1.
Do not use it for any other device.
• Do not connect or disconnect the outlet plug from the DPC6.1 while the other end is plugged into the wall AC outlet.
Connecting to an Audio System and TV
with COMPONENT VIDEO Inputs
■ It is also possible to “split” the audio and video signals by sending the video signal to your TV set and
the audio signal to an amplifier. Doing so has the advantage that you can:
Notes
Your DPC-6.1 provides several options for audio playback: you can use the analog or one of the digital audio
outputs. If your amplifier only provides analog inputs, use the DPC-6.1’s ANALOG OUTPUTs and select them via the onscreen menu (“Analog 2ch”). See “Audio Settings” on page 36 for details.
Connections
• See also the manuals of your audio amplifier and TV set for establishing the correct connections and making the required
settings.
• Before connecting the DVD Changer to other equipment, be sure to turn off the power and unplug all components from the
wall outlet.
• This DVD Changer outputs a very dynamic audio signal. Be sure to set the amplifier’s volume to a moderate listening level to
avoid damaging your speakers due to sudden volume surges.
• Switch off the amplifier or select another input source before connecting or disconnecting the DVD Changer’s power cable. If
you leave the amplifier power on, the speakers may be damaged.
Getting Started
• Listen to the sound of audio CDs and DVD videos in stereo (via the amplifier) or in Dolby Digital, Dolby Pro Logic
Surround or DTS (see pages 12, 13);
• Enjoy a better picture quality of DVD videos on a TV equipped with Component Video inputs than would be
possible via an S-video connection.
VIDEO OUTPUT
AC INLET
Y
PB
S VIDEO
PR
VIDEO
ANALOG
OUTPUT
DIGITAL
OUTPUT
COAXIAL
OPTICAL
L
R
(red)
To Y
To PB To PR
VIDEO VIDEO VIDEO
OUT
OUT
OUT
Power cable
(included)
To wall
outlet
(white)
To
ANALOG
AUDIO OUT
Basic Playback
Do not plug in
the power cable
until all connections have been
made.
COMPONENT
(See page 10)
Audio connection cable
(Not supplied)
(red)
(white)
Audio system
To PR video input
Advanced Playback
To audio inputs
of the amplifier
To PB video input
To Y video input
TV or monitor with
component signal inputs
■ COMPONENT VIDEO OUT (COLOR DIFFERENCE):
Note:
Others
Some TVs or monitors are equipped with Color Difference inputs. Connecting the DPC-6.1 to these inputs allows you
to enjoy a better picture quality. Be sur e to match the DPC-6.1’s VIDEO OUTPUTs with the Component Video inputs of
your TV or monitor (see the illustration).
Actual labels for the Color Difference inputs may vary depending on the TV manufacturer (e.g. Y, B-Y , R-Y, etc.).
On some TVs or monitors, the color levels of the picture may be reduced slightly, or the tint may change. In such
cases, adjust the TV or monitor for optimum performance.
Function Setup
Component video cable (Not supplied)
Signal flow
If you place the DVD Changer near a tuner or radio, the radio reception might be distorted due to interference. In this case, locate
the DPC-6.1 away from the tuner or radio.
11
Other Audio Playback Options
■ You can enjoy high-quality surround audio playback by connecting the DPC-6.1 to an amplifier
equipped with a Dolby Digital, Dolby Pro Logic Surround, or DTS decoder. Furthermore you can transfer
the signal of audio CDs to your amplifier in the digital domain if it is fitted with a digital input.
See pages 10 and 11 for the video hookup of the DPC-6.1 to your TV set.
When using an optical digital cable, remove the cap from the DIGITAL OUTPUT OPTICAL connector and firmly fit
the cable’s jack into the connector. When not using this connector, keep it capped to protect it from dust
intrusion.
Notes:
• Before connecting the DVD Changer to other equipment, be sure to turn off the power and unplug all components
from the wall outlet.
• This DVD Changer outputs a very dynamic audio signal. Be sure to set the amplifier’s volume to a moderate listening
level to avoid damaging your speakers due to sudden volume surges.
• Switch off the amplifier or select another input source before connecting or disconnecting the DVD Changer’s
power cable. If you leave the amplifier power on, the speakers may be damaged.
Connecting to an Amplifier Equipped with a Dolby Digital Decoder
Playback of Dolby Digital-encoded discs requires that you establish
a digital connection with the amplifier. The selection of the DPC6.1’s DIGITAL OUTPUT depends on the type of digital input provided
on your amplifier. Use either the DIGITAL OUTPUT COAXIAL or
OPTICAL connector. See the amplifier’s manual for details.
VIDEO OUTPUT
S VIDEO
PR
PB
Y
VIDEO
COMPONENT
DIGITAL
OUTPUT
ANALOG
OUTPUT
COAXIAL
OPTICAL
L
R
Optical digital cable
Signal flow
75 Ω coaxial cable
To OPTICAL type digital
audio input
To COAXIAL type
digital audio input
Connection
example
Amplifier equipped with a
Dolby Digital decoder
Front
speaker
(left)
Front
speaker
(right)
TV
Subwoofer
Center speaker
Surround speaker
(right)
Surround
speaker (left)
Dolby Digital
Dolby Digital is a surround sound technology used in movie theaters
that is now also available on equipment for a home environment.
You can play back motion picture and live-concert DVD videos of
this sound format by connecting the DVD Changer to a 6-channel
amplifier equipped with a Dolby Digital decoder or Dolby Digital
processor. If your amplifier (or separate decoder) supports Dolby
Pro Logic Surround, you can even play back Dolby Pro Logicencoded DVD movies with full 5.1-channel Dolby Digital
soundtracks, as well as titles with the Dolby Surround mark.
• This functionality is only available when using DVD videos with
Dolby Digital encoding.
• Make the following settings:
Setting
Select:
Page
Audio Out Select
Bitstream
36
Recording system
29
• Select the Dolby Digital or Dolby Pro Logic Surround mode on
your amplifier.
Connecting to an Amplifier Equipped with Dolby Pro Logic Surround
Your DPC-6.1 also supports Dolby Pro Logic Surround. This effect can
be obtained in one of two ways: via a digital or an analog connection
with an amplifier that supports Dolby Pro Logic Surround (see below).
VIDEO OUTPUT
Y
PB
S VIDEO
PR
VIDEO
COMPONENT
ANALOG
OUTPUT
DIGITAL
OUTPUT
COAXIAL
OPTICAL
L
R
Signal flow
Audio cable
Connection
example
To audio input
Amplifier equipped with
Dolby Pro Logic surround
Front
speaker
(left)
Front
speaker
(right)
TV
Dolby Pro Logic Surround
Playback of Dolby Pro Logic Surround-encoded DVD videos requires
that you connect the DPC-6.1 to an amplifier with right and left front
speakers, a center speaker, and one or two surround speakers.
Feel free to use one or two surround speakers. Be aware, though,
that the output sound of the rear channel will be monaural even if
you connect two surround speakers.
• If your amplifier is fitted with a digital input:
See the connection for Dolby Digital playback above and make
the suggested settings. See also the amplifier’s manual for how
to select its Dolby Pro Logic Surround mode.
• If your amplifier has no digital input:
Connect the DPC-6.1’s ANALOG OUTPUTs as shown in the
illustration to the left, and make the following setting:
Setting
Select:
Page
Audio Out Select
Analog 2ch
36
• Select the Dolby Pro Logic Surround mode on your amplifier.
Center speaker
12
Surround speaker
Note:
Do not forget to select the DVD Changer’s AUDIO OUTPUTs
(“Analog 2ch”). See “Audio Settings” on page 36 for details.
Warnings
Getting Started
• If you connect to the digital input of an amplifier that does not have a Dolby Digital decoder or DTS decoder, set the DPC-6.1’s
“Audio Out Select” function to “PCM.” Any other setting may damage your ears or speakers when using high volume levels.
• During playback of DTS-encoded audio CDs, excessive noise may be output from the ANALOG OUTPUTs. To avoid possible
damage to your audio system, we recommend you either break the connection between the DVD Changer’s ANALOG
OUTPUTs and the amplifier, or to only start playback of your DPC-6.1 after selecting the appropriate digital input source on
your amplifier.
• DTS Digital Surround™ playback is only available if you connect an external 5.1-channel DTS Digital Surround™ decoder to a
DIGITAL OUTPUT jack of the DVD Changer.
Connecting to an Amplifier Equipped with a DTS Decoder
Playback of DTS-encoded discs requires that you establish a digital connection with the amplifier. The selection of the
DPC-6.1’s DIGITAL OUTPUT depends on the type of digital input provided on your amplifier. Use either the DIGITAL
OUTPUT COAXIAL or OPTICAL connector. See the amplifier’s manual for details.
S VIDEO
PR
VIDEO
COMPONENT
DIGITAL
OUTPUT
ANALOG
OUTPUT
COAXIAL
OPTICAL
L
R
Signal flow
Optical digital cable
75 Ω coaxial cable
To COAXIAL type
digital audio input
Connection
example
To OPTICAL type digital
audio input
TV
Front
speaker
(right)
Subwoofer
Center speaker
Select:
Page
Audio Out Select
Bitstream
36
Recording system
DTS
29
• Select the DTS mode on your amplifier.
Digital Stereo Audio Playback
The DPC-6.1 also allows you to output a stereo audio signal in the
digital domain. The selection of the DPC-6.1’s DIGITAL OUTPUT
depends on the type of digital input provided on your amplifier. Use
either the DIGITAL OUTPUT COAXIAL or OPTICAL connector. See the
amplifier’s manual for details.
Connecting to an Amplifier Equipped with a Digital Audio Input
PCM
If your amplifier provides a digital audio input, you can establish a
digital connection between the DPC-6.1 and the amplifier. Choose
this type of connection if your amplifier is equipped with a better D/
A converter than your DPC-6.1, or if you also own a dedicated D/A
converter.
VIDEO OUTPUT
Y
PB
S VIDEO
PR
VIDEO
COMPONENT
ANALOG
OUTPUT
DIGITAL
OUTPUT
COAXIAL
OPTICAL
L
R
Signal flow
• Make the following setting:
Optical digital cable
To OPTICAL type digital
audio input
To COAXIAL type
digital audio input
Amplifier equipped with
a Digital Audio Input
Front
speaker
(left)
TV
Front
speaker
(right)
Setting
Select:
Page
Audio Out Select
PCM
36
Notes:
Others
• NEVER connect a DIGITAL OUTPUT jack of the DVD Changer to
the AC-3 RF input of a Dolby Digital Receiver. AC-3 RF inputs use
a different encoding format that is not supported by the
DPC-6.1’s DIGITAL OUTPUTs.
• The amplifier’s coaxial digital input may be labelled “DIGITAL”
rather than “COAXIAL”. See its manual for details.
Function Setup
75 Ω coaxial cable
Connection
example
Advanced Playback
Surround
speaker (right )
Surround
speaker (left )
Setting
Basic Playback
Amplifier equipped with
a DTS decoder
Front
speaker
(left)
Digital Theater System (DTS)
DTS is a high-quality surround technology used in movie theaters
that is also available for home use on DVD videos or audio CDs. If
you have a DTS decoder or processor, you can obtain the full
benefit or 5.1-channel DTS encoded sound tracks.
• DTS functionality is only available when using DVD videos or
audio CDs with DTS encoding.
• Make the following settings:
Connections
VIDEO OUTPUT
PB
Y
13
CAUTION
Keep your fingers clear of the disc drawer as it is
closing to avoid personal injury.
Playing back Discs
Power
Disc Skip
Standby/On
Standby/On indicator
2
Disc 1–6
Open /Close
Pause
Play
Stop
Next Selection
Power
DP C -6.1
Repeat
Standby/On
On
CD Play
Dimmer Display
Disc Skip
Disc 1
Disc 2
Disc 3
Disc 4
Disc 5
Disc 6
Of f
This section shows you the basics on how to playback a disc.
Most steps in this manual need to be per formed using
the supplied remote contr oller. The relative buttons are
usually indicated at the beginning of a section.
Direct Digital Path
DP C -6.1
3
Basic Playback
■ Preparations
• To view a video disc, switch on your TV set and select the video input the DPC-6.1 is connected to. See also pages
10, 11 for how to connect the DVD Changer to your TV set.
• If you are also using an amplifier for separate audio playback (see pages 11, 12, 13), switch on the amplifier and
select the input the DPC-6.1 is connected to.
1
-2
Power
Connecting to a Wall Outlet and Powering On.
1 Plug the power cable into a suitable wall outlet.
On
-3
Of f
Standby/On
The Standby/On indicator on the main unit lights.
or
POWER
2
2 Press the Power button on the main unit to switch it
to Standby mode.
Open /Close
3 Press the Standby/On button on the main unit, or the
POWER button on the supplied r emote contr oller to
switch on the DVD Changer .
Note:
When you use the DPC-6.1 for the first
time:
When the DPC-6.1 is shipped from the
factory, the Power switch is set to On
(
On
Off ). Therefore, when you
plug in the power cable to the AC
outlet, the Standby/On indicator lights
up and the unit enters Standby mode
as described in Step 1- 2.
The display lights up, and the Standby indicator
goes dark.
Press the
OPEN/CLOSE button.
Note:
The disc drawer opens, and the disc indicator lights up.
(See “DISC INDICATORS ATTENTION” on page 42.)
or
The disc drawer can also be opened
when the DVD Changer is switched
off.
OPEN/
CLOSE
3
Place a disc in the front disc tray (DISC 1).
DISC 2
DISC 1
DISC 6
DP C -6.1
Be sure to insert the disc with the playback side down.
Notes:
• The DPC-6.1 supports two disc sizes.
To avoid damaging your discs or
causing malfunction, be sure to
insert the discs in the corr ect guide.
• Only use DVD videos, VIDEO CDs or
audio CDs. Other data carriers may
damage your DVD Changer and/
or amplifier/TV set.
■ Placing discs in the remaining disc trays.
Repeatedly press the DISC SKIP button on
Disc Skip
the main unit to rotate the disc drawer
counter-clockwise, and place a disc in
each desired tray (1–6).
4
14
Open /Close
Press the
OPEN/CLOSE button again.
The disc drawer closes.
Press one of the DISC 1–6 buttons to select the
desir ed disc on the tray for playback.
Note:
Alternatively, press one of the DISC 1–6
buttons to close the disc drawer and
play the selected disc automatically.
To obtain a higher picture quality
Occasionally, some pictur e distortion not usually visible during a
normal telecast may appear on the TV screen during playback
of a DVD video. This is due to the fact that DVD videos provide a
higher resolution and therefore also more data to process. While
the amount of noise depends on the TV you connect the DVD
Changer to, reducing the sharpness setting on your TV when
viewing DVD videos may alleviate the problem.
POWER
OPEN/CLOSE
PLAY
PAUSE
STOP
MENU
ENTER
/ / /
1
2
3
4
5
6
7
8
9
+10
0
TOP MENU
DVD
DISC +/—
REMOTE CONTROLLER
RC-426DV
DVD
Press the
PLAY
PLAY button.
Play
1. Press the OPEN/CLOSE button to open the disc drawer.
2. Press the DISC SKIP button on the main unit repeatedly
until the disc you wish to replace can be accessed.
3. Remove the disc you wish to replace, and insert another disc.
4. Press the OPEN/CLOSE button again to close the disc drawer.
Note:
■ Selecting the desired disc for playback
Press one of the DISC 1–6 buttons on the main unit or on the
remote controller. The DPC-6.1 starts playing the first title of the
PLAY button.
selected disc. There is no need to press the
<main unit>
Disc 2
Disc 3
Disc 4
<remote controller>
Disc 5
Disc 6
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 6
The FIRST SETUP screen is only displayed the very first time
you switch on your DPC-6.1. This page allows you to set
Note:
If you agree with the currently selected language, just press
ENTER without changing the setting.
5. Press the button to select the “TV Shape” function
and confirm by pressing ENTER.
This function allows you to specify the picture size of
your TV. See 35 for details.
6. Use the and buttons to specify the screen size and
confirm by pressing ENTER.
7. Press the SETUP button to stor e your settings.
The settings are stored and you are returned to the FIRST
SETUP screen page. As stated above, you can also
change these settings at a later stage. See page 32.
Others
■ The FIRST SETUP screen
ENTER
Function Setup
Notes:
• If you select the desired disc using one of
the DISC 1–6 buttons while the DVD Changer
is playing back a title of another disc, playback starts with
the first title of the newly selected disc.
• You can also press the DISC SKIP button on the unit or DISC
+/– button to jump to the disc in the next tray (or from tray #6
to tray #1 if the disc in tray #6 is curr ently being played back).
In that case playback will start with the first title of the disc in
the newly selected tray.
• If you select the desired disc by pressing the DISC SKIP button
while the DVD Changer is stopped, press the
PLAY button
to start playback of the first title of the selected disc.
the two single most important parameters. Note that you
can change these settings any time by selecting the appropriate on-screen menu function. See also page 34, 35.
1. Check the video connection of the DVD Changer to
your TV set (see page 10 and following) and switch on
your TV.
2. Switch on the DVD Changer .
The following menu screen
page is displayed:
Thank you for your purchase of
our DVD-Video Player.
3. Press the remote contr oller’s
Please make a selection for
On-Screen Language and your TV shape
or button to select “Onand press ENTER button on your remote control.
FIRST SETUP
Screen Language” and pr ess
ENG
On-Screen Language
4:3LB
TV Shape
the ENTER button.
You can select one of the
following languages: ENG <remote controller>
To select the items
(English), FRE (French), or
on the screen.
SPA (Spanish). That
language will be used on
After selecting an
all on-scr een menu pages
item, confirm your
and for subtitling. See page
choice by pressing
ENTER.
35.
4. Select the desired language using the or button
and confirm by pressing ENTER.
Advanced Playback
You can also press the
PLAY button to automatically close
the drawer and start playback of the disc that is currently up
front. To start playback of another disc than the one in the front
tray, you first need to close the disc drawer.
• For PBC (Playback Control) of VIDEO CDs,
see “About VIDEO CDs” on page 9.
• Depending on the DVD video you are
using, you may need to press the TOP
MENU or MENU button to display the
menu screen.
Basic Playback
■ Inserting other discs
Disc 1
Notes:
The DVD Changer starts playback.
If you have inserted a DVD video with a title menu or
a Video CD with PBC (Playback Control) functionality, a menu screen may appear. See “Direct Playback via the On-Scr een Menu” on page 16.
To start playback of a PBC-equipped VIDEO CD
from the menu screen, set “PBC” to “ON” via the onscr een menu function. See page 38.
or
CD
Connections
5
VCD
Getting Started
VCD
CD
About the
symbols
The DVD VCD CD icons on the heading bars below show the discs
that support the function described in the section in question.
DVD : This function is available for playback of DVD videos.
VCD : This function is available for playback of VIDEO CDs.
CD : This function is available for playback of audio CDs.
15
FR
PLAY
FF
OPEN/CLOSE
PAUSE/STEP
Playing back Discs (continued)
STOP
/ / / ,
ENTER
2
8
Fast reverse
Fast forward
SlowMotion
30
Last
Play
1
2
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
3
RC-426DV
You can play back discs at various speeds, and resume playback in various
ways. Use the remote contr oller for the following functions.
DVD
VCD
Direct Playback, Stop and Pause
DVD
VCD
CD
Fast Reverse and Fast Forward Playback
■ Direct Playback via the On-Screen Menu
1. Switch on your TV set.
2. Select the desired title using the /
/ / or the number buttons.
3. Press the ENTER button.
The DVD Changer starts playing back the selected title.
• If you do not need the menu functionality of PBCencoded Video CDs, set the “PBC” function to “Off”.
See page 38.
FR
ENTER
FF
■ Pausing Playback: Still mode
1. To pause playback, press the PAUSE/STEP button.
• The sound is muted during still mode.
2. Press the
Press the FR (fast reverse) or FF (fast
forward) button during playback.
• DVD videos
The playback speed changes to twice the
normal speed in the selected direction.
Press the button again to further increase
the fast forward or reverse speed.
FR: press this button to quickly return to
an earlier position.
FF: press this button to advance to a
position behind the current position.
TV screen
PLAY button to r esume playback.
2
8
30
Note:
The DPC-6.1 also provides a function for optimum display of still pictures (only available for DVD videos). See “Pause/Still” on page 37.
X2 the normal
speed
■ Stopping Playback
Press the STOP button.
If you do not wish to resume playback from this position,
see “Resuming Playback from the Beginning of the Current Title” on page 17.
FR
FR1
FR2
Fast reverse
playback
FF
FF1
FF2
Fast forward
playback
Notes:
16
• VIDEO CDs/Audio CDs
For Video and Audio CDs, there are
two fast forward and reverse speeds.
TV screen
3. Wait until the disc drawer has opened completely,
then remove the disc.
• Do not move the DPC-6.1 during playback or subject it to
strong vibrations to avoid damaging the discs.
• Use the OPEN/CLOSE button on the e
r mote controller or
DVD player to open and close the disc drawer. Do not
obstruct the disc drawer while it is moving. Doing so may
cause the DVD Changer to malfunction.
• Do not push up the disc drawer or put objects other than discs
on it. Doing so may cause the DVD Changer to malfunction.
• In many instances, a menu screen will appear after playback of
a movie is completed. Prolonged display of such a menu may
damage your television set, permanently etching that image
onto the screen. To avoid this, press the STOP button on your
remote controller once playback of the movie is finished.
• If you pause a picture and leave it still for a long time, the
screen saver of the DPC-6.1 is automatically activated
(provided the “Screen Saver” function is set to “On”, see
page 37). To deactivate the screen saver and resume
playback, press the
PLAY button.
X30 the normal
speed
The direction of the arrow varies
depending on the button you press.
■ Removing a Disc
1. Stop playback.
2. Press the OPEN/CLOSE button.
X8 the normal
speed
■ Resuming Normal Playback after Fast Forwarding/Reversing
PLAY
After locating the desired position,
PLAY button to r esume
press the
normal playback.
• The DVD Changer does not play back sound or
subtitles during fast reverse or forward scans of DVD
videos. The sound of audio CDs, however, is played
back at the selected scrolling speed.
• The x2, x8 and x30 speeds ar e only approximate
values. They may vary slightly fr om disc to disc.
PLAY
PLAY
PAUSE/STEP
SLOW
1
2
3
1
2
4
5
6
4
5
6
7
8
7
8
9
+10
0
+10
0
9
RC-426DV
REMOTE CONTROLLER
DVD
STOP
Press the STOP button at the location
where you want to halt playback.
The DVD Changer memorizes this location.
2
PLAY
Press the
PLAY button.
The DVD Changer resumes playback
from the location where playback was
stopped.
1/4
1/8
or
1/4 the
normal speed
Only for the
DVD video
1/8 the
normal speed
TV screen
1/8 the
normal speed
1/4
1/4 the
normal speed
1/2
1/2 the
normal speed
■ Resuming Playback from the Beginning of the
Current Title
If you do not wish to resume playback from the position
where it was stopped, proceed as follows. In this case,
playback will be started from the beginning of the last
title you played back, or from the beginning of the disc.
1. Stop playback by pressing the
■ Resuming Normal Playback
PLAY
Press the
PLAY button to r esume
normal playback.
■ Using Frame Step
PAUSE/STEP
DVD
VCD
While playback is paused, you can
step forward one frame at a time by
pressing the PAUSE/STEP button.
2. Press the
STOP button twice.
The second press of the STOP button
will clear the DVD Changer’s location
memory.
PLAY button.
PLAY
Notes:
Others
• The DVD Changer’s location memory is also cleared when you:
– unplug the DVD Changer from the wall outlet after stopping
playback.
– open the disc drawer.
– adjust/change the Parental Lock function (see page 37) or
select another disc menu language (see page 34).
• Depending on the disc, playback may not be resumed at
the exact location where it was stopped.
• Other settings you change via the on-screen menu while a
location is memorized may be available only after the
memory is clear ed.
Function Setup
The location where playback is started
depends on the type of disc you are
using:
DVD video: Playback starts from the
beginning of the current title.
Video CDs/audio CDs: Playback starts
from the beginning of the disc.
• To resume playback a DVD video from the beginning
of the disc, press the STOP button, open and close
the disc tray by pressing the OPEN/CLOSE button,
PLAY button.
then press the
Advanced Playback
STOP
Basic Playback
1
Connections
Press the
or
SLOW button during
playback.
By pressing either button repeatedly,
you can cycle through the three
available playback speeds.
1/8
CD
After stopping playback, you can either resume from the
location where it was stopped, or from the beginning of
the current title.
TV screen
SLOW
VCD
Resuming Playback From the Desired Location
DVD videos can be played back in slow motion. This is
done by reducing the playback speed.
1/2 the
normal speed
RC-426DV
DVD
VCD
Slow-Motion Playback
1/2
3
Getting Started
REMOTE CONTROLLER
SLOW
STOP
17
Locating Titles, Chapters, or Tracks
DVD video
Title 1
Title 2
VIDEO CD/ Audio CD
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Track 2
Track 1
Track 3
Track 4
Track 5
Normally, DVD videos are divided into “titles”, while the titles are themselves sub-divided into “chapters”. VIDEO
CDs and audio CDs are divided into “tracks”. You can quickly locate any specific title, chapter, or track.
DVD
DVD
Locating a Title Using the Title Menu
Title Selection with the Numeric Buttons
If the DVD video you are playing back contains a title
menu, you can locate any specific title you wish to play
back.
If the selected DVD video contains Title numbers, you
can select the desired title by entering its number.
1
1
TOP MENU
Press the TOP MENU button.
A Title menu like the following appears:
TITLE 1
Press the SEARCH button.
Check whether the Title number is highlighted. If it is not, press to select it.
SEARCH
TITLE 2
Example:
1
T i t l e:
Chapter :
TITLE 3
2
2
ENTER
3
ENTER
Use the / / / buttons to select
the title you want to watch.
If the titles in the Title menu are assigned a number, you can directly
select the desired title using the
numeric buttons on the remote
controller.
1
2
3
4
5
6
7
8
9
+10
0
• The above instructions correspond to the basic procedure.
Please note that the exact steps may depend on the
contents of the selected DVD video. If different instructions
appear on the TV screen, follow those instructions.
• If you display the Title menu during playback and press the
TOP MENU button again without selecting a title, the DVD
Changer resumes playback from the point where you first
pressed the TOP MENU button.
Press the numeric button of the T itle
you wish to select.
To select a two-digit title, press the
digits in or der of magnitude (e.g., for
32, press “3” then “2”).
To select Title 2, press [2].
T i t l e:
2
Chapter :
2
1
To select Title 12, press [1] or [+10]
once, then [2].
Press the ENTER button.
The DVD Changer starts playback from
Chapter 1 of the selected title.
Notes:
18
1
TITLE 4
1
2
T i t l e: 12
Chapter :
or
+10
3
PLAY
1
2
Press the
PLAY button.
The DVD Changer starts playback from
Chapter 1 of the selected title. You can
also select another Chapter before
starting playback.
Notes:
• Press the CLEAR button if you do not wish to start playback
from the Title number you have just entered (before pressing
the
PLAY button). Pressing CLEAR several times will r eset
both the Title and Chapter numbers. (SEARCH also allows
you to directly select the desired Chapter, see next page.)
• See pages 32, 34 for how to select the languages for the onscreen menu displays.
DOWN
PLAY
UP
/ / /
ENTER
TOP MENU
1
2
4
5
6
7
8
9
+10
0
CLEAR
Numeric buttons
SEARCH
RC-426DV
DVD
VCD
CD
Getting Started
REMOTE CONTROLLER
3
Selecting Chapters or Tracks
■ Direct Selection using the Numeric Buttons
Note:
Steps 1 and 2 are only necessary for DVD videos. Start with step
3 if you want to select a Track of a Video or audio CD.
1
Press the SEARCH button.
In the case of a DVD video, the
following is displayed:
SEARCH
Note:
Press the CLEAR button if you do not wish to start playback from
the Chapter number you have just entered (before pressing the
PLAY button). Pressing CLEAR several times will r eset both
the Title and Chapter numbers.
■ Selecting the Next/Previous Chapter or Track
Another way to select Chapters (DVD videos) or Tracks
(Video/audio CDs) is by using the UP and DOWN buttons:
2
Press the button to select the numeric field next to the Chapter entry:
1
T i t l e:
Chapter :
3
1
2
3
4
5
6
7
8
9
+10
0
1
Press the numeric button of the Chapter (or Track) you want to play back.
To select two-digit numbers, press the +10
button followed by a numeric button.
To select Title 25, press [2] once, then [5]
or press [+10] twice (for “20”) then [5].
(Video/
(DVD video) Audio CD)
5
2
Title:
1
2 5 Track : 2 5
Chapter :
or
+10
4
PLAY
+10
Press the
5
PLAY button.
As stated above, it is also possible to specify the desir ed
Chapter number after selecting a Title (see the previous
page) before starting playback. To select Chapter 25 of
Title 2, for example, here is what you need to do.
SEARCH
• Some Titles don’t contain Chapter numbers. In that case, the
DOWN
and UP
buttons do not work.
• If “Title Stop” is set to “Off” (see page 38), the DOWN
and UP
buttons also allow you to jump from the last (or
first) Chapter of a given Title to the first Chapter of the next
(or previous) Title. That is, if you pr ess DOWN
after
returning to Chapter 1 of the current Title, the DVD Changer
jumps to the first Chapter of the previous Title. Pressing UP
after selecting the last Chapter of the current Title takes you
to Chapter 1 of the following Title. If “Title Stop” is set to “On”,
the DOWN
and UP
buttons only allow you to cycle
through the Chapters of the currently selected Title.
Function Setup
■ Selecting Titles and Chapters Simultaneously
Notes:
Advanced Playback
1
UP
Use the DOWN
or UP
button to
select the desired Chapter or T rack.
Playback starts automatically, so you do
PLAY button.
not need to press the
: The DOWN
button has two
functions. If you press it once, the
DVD Changer returns to the beginning of the currently selected
Chapter or Track. Press it twice to
return to the beginning of the preceding Chapter or Track.
: Press UP
to jump to the beginning of the next Chapter or Track.
Basic Playback
DOWN
1
T i t l e:
Chapter :
Connections
The DPC-6.1 also allows you to directly select a Chapter
of a Title (DVD videos) or a Track (Video or audio CD).
PLAY
Title number
2
5
Chapter number
Others
2
T i t l e:
2
25
Chapter :
19
Selecting a Precise Scene or
Audio Passage
PLAY
1
2
4
5
6
7
8
3
9
+10
0
Numeric buttons
SEARCH
It is also possible to directly select a given location and to start playback
from there. This may come in handy when you want to view a given scene
(DVD videos/Video CDs) or listen to a specific passage (audio CD) within
the currently selected Title or Track.
DVD
VCD
CD
Entering the Time Location
Here is how to enter the time location of the scene or
passage you wish to play back:
1
Press the SEARCH button several times
until the following message is displayed:
SEARCH
Time ––:––:––
2
1
2
3
4
5
6
7
8
9
Enter the desired time value with the
numeric buttons.
Here is an example:
1
2
5
3
0
0
Time 1:25:30
3
PLAY
Press the
PLAY button.
The DVD Changer starts playback from
that location.
Notes:
• Some discs may not respond to this procedure.
• In some cases, there may be a slight shift between the time
value you enter and the location where playback starts.
• This method of selecting the desired location is only available
within the current Title (DVD videos) or track (Video/audio
CDs).
20
REMOTE CONTROLLER
RC-426DV
Repeat Functions
1
2
4
5
6
7
8
9
+10
0
CLEAR
REPEAT
A-B
RC-426DV
Your DVD Changer allows you to repeat a given Title, Chapter/track or
disc indefinitely. It is also possible to repeat a given scene or audio
passage (A–B Repeat).
DVD
VCD
DVD
CD
Repeating a Title or Chapter/Track
VCD
CD
Getting Started
REMOTE CONTROLLER
3
Repeating a Given Scene or Passage
Here is what you need to do in order to program a playback loop of the selected Title, Chapter/track, or disc:
Select the disc that contains the
material to be repeated (or that you
want to playback repeatedly in its
entirety).
See “Selecting the desired disc for
playback” on page 15.
2
A-B
Select the Title or Chapter/track you
want to repeat.
See “Locating Titles, Chapters, or
Tracks” on page 18 and following.
REPEAT
Chapter Repeat
Repeats the same
chapter.
Title Repeat
Repeats the same
title.
Disc Repeat
Repeats the same
disc.
All Repeat
Repeats all discs.
Repeat Off
Resumes normal
playback.
Repeats the same
track.
Disc Repeat
Repeats the same
disc.
All Repeat
Repeats all discs.
Repeat Off
Resumes normal
playback.
3
A-B
Press A–B again at the end of the
excerpt to be repeated (to store point
“B”).
A–B
The DVD Changer automatically
returns to point “A” and starts repeating the selected excerpt.
4
CLEAR
To cancel the Repeat function at any
time, press the CLEAR button.
Notes:
• Some discs do not support the A–B Repeat function.
• The “A” and “B” points must be located within the currently
selected Title or Track.
• For DVD videos: The A–B Repeat function is not available for
scenes that provide several camera angles.
• In some cases, the “A” and “B” points may be shifted slightly
with respect to the positions you selected.
Others
To cancel the Repeat function at any
time, press the CLEAR button.
A–
Function Setup
CLEAR
Track Repeat
Press the A–B button at the beginning
of the scene or passage you wish to
repeat (this position is called “A”).
Advanced Playback
Press the REPEAT button to select the
desired Repeat function.
Pressing this button repeatedly cycles
you through the available options.
These options depend on the currently
selected disc:
DVD videos:
Video CDs/audio CDs
4
2
Start playback of the desired Chapter
or Track (see page 19 and following for
how to select it).
Basic Playback
3
1
Connections
1
Note:
Some discs do not support these Repeat functions.
21
Setting the Desired Playback
Order
PLAY
/ / /
ENTER
RETURN
Title : 2
Chapter : 25
Title : 2
Chapter : 12
Title : 1
Chapter : 1
1
2
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
MEMORY
CLEAR
Numeric buttons
DISPLAY
RC-426DV
Your DPC-6.1 comes with a special 28-step memory that allows you to
program the order in which the Titles and Chapters/tracks are to be played
back. Such “sequences” can include material from several discs.
Programming Memory Sequences
The DPC-6.1’s Memory function allows you to program
the order in which the material on one or several discs
should be played back.
Note:
1
Insert the disc(s) you need for programming the desired sequence.
2
Switch on your TV set.
Stop playback if it is still running, and
press the MEMORY button.
MEMORY
MEMORY
D T
––
––
––
––
1–
2–
3–
4–
C
D T
–– 8 – ––
–– 9 – ––
– – 10 – – –
– – 11 – – –
C
––
––
––
––
D T
––
––
––
––
15 –
16 –
17 –
18 –
C
––
––
––
––
D
22 –
23 –
24 –
25 –
T
––
––
––
––
C
––
––
––
––
The letters on this menu page have the
following meaning:
D: Disc number, T: Title (or Track)
number, C: Chapter number.
4
5
1
2
3
4
5
6
7
8
9
+10
0
ENTER
6
7
22
Here are a few hints that explain the programming
system and help you save time:
Note:
If you only want to select the next track for playback, using the
Next Selection function is a lot faster. See page 24.
3
■ Programming the D, T and C entries
Use the numeric buttons on the remote
controller to enter the numbers you
wish to include in your Memory sequence.
Use the / buttons to move the cursor
to the “D”, “T”, or “C” column, depending on whether you want to enter a disc,
Title (or Track), or Chapter number.
Confirm your selection by pressing the
ENTER.
The DPC-6.1 now jumps to the next
Memory step.
Program the remaining steps.
PLAY
Press the
PLAY button to start
playback of your memory sequence.
For Video and audio CDs, you can only program the disc (“D”)
and Track numbers. Track numbers are assigned to the “T”
entry. The “C” entry only applies to DVD videos.
Only specify what you does need to change:
Disc number: if a subsequent entry refers to the previously selected disc number, you do not need to enter it
again for the new step. (Do not change the “—” setting
for “D”.)
Title number (DVD videos only): if a subsequent step
refers to another Chapter of the previously selected Title,
only entering the Chapter number is enough. (Do not
change the “—” setting for the “D” and “T” entries.)
Chapter number (DVD videos only): if you want the DPC6.1 to play back all Chapters of the selected Title, leave
the “C” entry blank.
Chapter number
ENTER
2
3
2
5
ENTER
Memory 2
1
2
All chapters of Title #1 on disc #1:
Disc number Title number
Leaving the MEMORY display page
To leave the MEMORY display page, press the MEMORY
button.
Correcting an entry of a previously programmed step:
a) Use the / buttons to move the cursor to the
corresponding memory number.
b) Select the entry (D, T or C) you wish to change with
the / buttons.
c) Enter the correct value using the numeric buttons.
1
1
Chapter 2 of Title #4 on disc #1:
ENTER
Memory 4
4
2
MEMORY
C
25
12
––
02
––
––
––
D
8–
9–
10 –
11 –
12 –
13 –
14 –
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
D
15 –
16 –
17 –
18 –
19 –
20 –
21 –
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
D
22 –
23 –
24 –
25 –
26 –
27 –
28 –
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
Programming the next step during playback
If you press the MEMORY button during playback, a
menu page is displayed where you can program a new
step.
Programming several new steps during playback
a) Press the MEMORY button followed by the DISPLAY
button.
The Memory menu appears on the TV screen.
b) Continue with step 3 on page 22.
Notes:
• Some discs do not allow Memory playback.
• The Repeat function (see page 21) is also available during
playback of your Memory sequence. Press the REPEAT button
to activate it for the current step of your Memory sequence.
• You can only program Title (or Track) and Chapter numbers
that exist on the selected disc.
• For Video and audio CDs, the “T” entry allows you to select
the track, while the “C” entry is not used.
• The Memory function is also available during playback.
Function Setup
“Copy” the settings of the previous memory:
Doing so allows you to use the settings of the previous
memory as a starting point and only change one entry.
Example: if memory 1 refers to disc 3/Title 2/Chapter 25,
while memory 2 needs to refer to disc 3/Title 2/Chapter
12, you can “copy” memory 1 to memory 2 and modify
the “C” (chapter) entry:
• Program the memory to be copied (example:
memory 1), and press the ENTER button. The DVD
Changer advances to memory 2.
• Use the numeric buttons to enter the chapter number
12 on the black cursor on the “C” entry, then press the
ENTER button, “D” and “T” on the memory 1 are
copied to memory 2.
Erasing the entire Memory sequence
To erase all steps, either switch the DVD Changer off and
back on again, or open and close the disc tray.
Advanced Playback
D T
1 3 02
2 3 02
3 1 01
4 1 04
5 – ––
6 – ––
7 – ––
Erasing a step
a) Stop playback.
b) If the Memory sequence is not currently displayed,
press the MEMORY button to select it.
c) Select the step you wish to erase with the /
buttons.
d) Press the CLEAR button to erase the selected step.
Basic Playback
ENTER
Memory 3
Connections
Chapters 25 and 12 of Title # 2 on disc #3 (two steps):
Memory 1
CD
■ Other Memory Functions
Here are a few programming examples:
Disc number Title number
VCD
Getting Started
DVD
Others
23
Additional Playback Functions
Numeric buttons
1
2
4
5
6
7
8
9
3
+10
0
DISC +/–
NEXT
SELECTION
DISC 1–6
REMOTE CONTROLLER
RC-426DV
CD
Next Selection: Preparing the next Audio Track
During playback of an audio CD, you can already prepare the next track that will be played as soon as the current
one is finished. The difference with direct selection of a track or disc is that playback of the prepared track starts only
after the current track is finished (i.e. not right away).
1
During playback of an audio CD, press
the NEXT SELECTION button on the
DPC-6.1 or the remote controller to
activate this function.
NEXT
SELECTION
NEXT indicator
flashes
The NEXT indicator flashes and the disc
number and track number disappear on
the display.
2
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 6
1
2
3
4
5
6
7
8
9
+10
0
Select the track using the numeric buttons.
The number of the selected track lights
up on the display.
In that case, the display looks as follows:
Notes:
• This function is only available for audio CDs (when the CD
indicator lights).
• You need to press one of these buttons within 8 seconds after
pressing NEXT SELECTION. Otherwise, the Next Selection function will be cancelled. In that case, start again with step 1.
24
You can also use the DISC SKIP button on the DPC-6.1 to select
the next disc.
■ Checking the next selection
1
NEXT
SELECTION
Use the DISC 1 – 6 buttons (or DISC +
and DISC –) to select the disc that
contains the next track you want to
listen to.
The number of the selected disc and
the “NEXT” indicator flash and the “AL”
appears on the display.
AL: means that all tracks will be played back.
If you wish to play all tracks of the selected disc, press the NEXT SELECTION
button again to confirm the operation.
Skip to Step 3 to select the track number.
If you do not press the NEXT SELECTION
button, the operation will be confirmed
when the number and the “NEXT” indicator stop flashing.
3
Tip:
Press the NEXT SELECTION button to
confirm your selection.
The disc number flashes and the track
number lights up continuously. After a
few moments, the disc and track
numbers of the currently playing track
reappear.
You can check the next selection by
pressing the NEXT SELECTION button.
As soon as the current track is finished,
the DVD Changer will play back the prepared track (or disc if you selected “AL”).
Notes:
• The
/
buttons are disabled while the Next Selection
function is activated. Pressing the DISC SKIP buttons or DISC
+/– buttons will cancel the Next Select function.
• You can only prepare one track with Next Selection. See
“Programming Memory Sequences” on page 22 for how to
prepare a series of tracks. Preparing yet another track before
the previously entered Next Selection command has been
executed overrides your first setting, so that only the second
Next Selection is carried out.
• If you stop playback by pressing the STOP button, the Next
Selection function is cancelled.
■ Cancelling the Next Selection function
If you decide not to take advantage of the Next Selection function after all, proceed as follows:
1. Press the NEXT SELECTION button.
The disc numbers flash on the display.
2. Press the CLEAR button.
3. Press the NEXT SELECTION button again.
The NEXT indicator goes dark and the function is
cancelled.
2
4
5
6
7
8
9
3
+10
0
CD PLAY
REMOTE CONTROLLER
RC-426DV
CD
Getting Started
1
Using the DVD Changer as CD player
1
CD PLAY
The indication changes in 2-3 seconds.
Press the CD PLAY button again to
cancel CD Mode.
The RPT message disappears and the
REPEAT indicator goes dark again to
signal that the DVD Changer has
returned to normal playback mode.
Notes:
Function Setup
• The CD PLAY button does not work while the DPC-6.1 is
playing back a disc other than an audio CD. You first need
to press the STOP button. Next, press the CD PLAY button to
enter CD PLAY Mode. The DVD Changer starts playing back
the audio CD in the disc drawer with the lowest number.
• Another way of selecting only audio tracks is to take
advantage of the DPC-6.1’s Memory function. See “Programming Memory Sequences” on page 22 for details.
Advanced Playback
CD PLAY
Basic Playback
Press the CD PLAY button while the DPC-6.1
is stopped or playing back a CD.
The RPT message appears on the
display and the REPEAT indicator lights
to signal that all audio CDs will be
repeated in sequence.
Connections
Since your DPC-6.1 allows you to insert up to five discs in
any combination (DVD videos, Video CDs, audio CDs),
there may be times when you only want to listen to music
and avoid having to press the DISC SKIP or DISC +/ –
buttons several times to skip to the next audio CD. In that
case, proceed as follows:
Others
25
Additional Playback Functions
(continued)
TITLE
Title : 1: 1
CHAPTER
Chapter
: 3: 3
Title : 2
Chapter : 2
Title : 3
Chapter : 1
PLAY
UP
The DPC-6.1’s Random playback functions allow you to select a mode where
the DPC-6.1 decides which Title or Chapter/track to play next. A similar function is available on most CD players. There are two Random functions: one for
DVDs only, and another that is available for both DVDs and Video/audio CDs:
1
2
3
4
5
6
7
8
9
+10
0
RANDOM
CLEAR
Numeric buttons
SEARCH
Random Playback
Title Random DVD
Playing Chapters or Tracks in Random Order DVD
For DVD videos, you can decide to have the DPC-6.1
select the Titles in a random (unpredictable) order:
This Random function allows you to activate random playback of the Chapters within the currently selected title
(DVD videos) or of the tracks on a Video or audio CD.
1
Stop playback and select the DVD
video whose titles you wish to watch in
random order.
See “Selecting the desired disc for
playback” on page 15 for details.
1
Press the RANDOM
DVD
button to select
Chapter Random
“Title Random”.
Pressing this button
repeatedly will
Title Random
cycle through the
following options:
Note:
Random Off
If you press the
RANDOM button
during playback,
the DPC-6.1 automatically starts
random playback after finishing the
current title.
2
2
RANDOM
3
PLAY
4
CLEAR
Notes:
• Some discs may not permit random playback.
• You cannot use this Random function in conjunction with
Memory playback (see page 22).
• Select “Random Off” if you do not need the Random
function after all.
26
CD
Stop playback and select the disc
whose titles you wish to watch/listen to
in random order.
See “Selecting the desired disc for
playback” on page 15 for details.
SEARCH
Press the SEARCH button and use the
numeric buttons on the remote controller to select the Title.
(DVD video)
SEARCH
2
Ti t l e: 2
Ch a p t e r :
1
Note:
This is only possible for DVD videos. Skip
to step 2 for Video/audio CDs.
3
RANDOM
Press the
PLAY button within 5 seconds after pressing the RANDOM button.
The DVD Changer starts random
playback.
Press CLEAR to resume normal playback.
VCD
4
PLAY
5
CLEAR
Press the RANDOM button to select
“Chapter Random” (DVD) or “Track
Random” (Video/audio CD).
(DVD video)
If you press the
RANDOM button
Cha p t e r Ra nd om
during playback,
Ti t le: 2
the DPC-6.1 autoCha p t e r : 1
matically starts
random playback after finishing the
current Chapter or track.
Press the
PLAY button within 5 seconds after pressing the RANDOM button.
The DVD Changer starts random playback.
Press CLEAR to resume normal playback.
Notes:
• Some discs may not permit random playback.
• You cannot use this Random function in conjunction with
Memory playback (see page 22).
• You can press the UP
button during Random playback to
jump to the next Chapter or track and continue Random
playback from there.
• Select “Random Off” if you do not need the Random
function after all.
DVD Video Functions
/ / /
/ / /
1
2
4
5
6
7
8
9
3
+10
0
ZOOM
CLEAR
ANGLE
Angle : 1
Angle : 2
Angle : 3
1
2
4
5
6
7
8
9
3
+10
0
DVD
DVD
Zooming in
CLEAR
Changing the Camera Angle
One of the new features of the DVD carrier is that some
discs contain scenes shot from different angles. The
following function allows you to select the desired angle.
1
1
ZOOM
Press the ZOOM button during normal or
slow (see page 17) playback or while
playback is paused (“still”, see page 16).
There are three Zoom levels. Press this
button repeatedly to select the desired
level.
ANGLE
Set the “On-Screen Displays” function
to “On” if you want the angle icon ( )
as well as series of other icons to be
displayed on screen. See pages 32, 37
for details.
If you do not need these on-screen messages, set the above function to “Off”.
Connections
The Zoom function allows you to magnify a portion of a
picture. Feel free to select the area to be magnified.
Getting Started
RETURN
Zoom 1
2
Zoom 2
Zoom 3
2
…press the ANGLE button.
Angle: 1
RETURN
ENTER
CLEAR
ZOOM
Press the RETURN button to progressively zoom out again (return to the
preceding Zoom level).
Use the / / / buttons to shift the
zoom point.
When the zoom point reaches an
edge of the picture, the color of the
“Zoom” message changes.
Pressing the CLEAR button restores the
zoom point to the center of the
picture.
Current angle
number
4
ANGLE
Select the desired Angle by repeatedly
pressing ANGLE.
You can also use the and buttons
to advance to the next or return to the
previous angle. ANGLE only allows you
to cycle in one direction.
Angle: 1
Angle: 2
Angle: 3
Notes:
Use the numeric buttons to directly
select the desired angle.
5
Press the CLEAR button to switch off the
angle number.
• You can also change the camera angle in pause (“still”)
mode (see page 16). In that case, the camera angle
changes to the new setting when you resume playback.
• If you pause a picture immediately after changing the
camera angle, the resumed playback picture may no
longer use the new camera angle.
Others
Notes:
Function Setup
To defeat the Zoom function, press the
ZOOM button repeatedly until the
“Zoom Off ” message appears.
• Some DVD videos do not support the Zoom function.
• For certain scenes, the Zoom function is not available.
• The Zoom function does not apply to subtitles or menu
screens included on DVD videos.
• During zoom playback, the / /
/
buttons are not
available for selecting option of a DVD’s menu function
(they are used to shift the zoom point). If you want to use the
menu screens, cancel zoom playback (see above).
• The magnification level varies depending on the picture size
you select (see page 32, 35).
Angle icon
Advanced Playback
3
4
3
Basic Playback
Start playback and look out for the
multiangle icon ( ).
If this icon appears on the display (and
on screen)…
27
DVD Video Functions
(continued)
/ / /
AUDIO
Good morning!
Bon jour!
¡Buenos días!
1
2
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
3
CLEAR
RC-426DV
Your DPC-6.1 allows you to select the following audio-related settings. The
number of options depends on the DVD video you are playing back. It is
not possible to select an option for which there is no data on the DVD.
Audio Playback Settings
Language: A DVD video may contain several language versions of a movie. Select the preferred language.
Recording system: Select the recording system that best matches the input capabilities of your amplifier or
6CH” if your amplifier does not support Dolby Digital
receiver. For example, there is little point in selecting “
5.1. Depending on the selected recording system, the DPC-6.1 automatically converts the audio data to an
acceptable format for your amplifier.
The DPC-6.1 accepts the Dolby Digital, DTS, and PCM recording systems. Other systems cannot be played
back. See also the conversion table below for details about the available options. Dolby Digital 5.1 Channel is
6CH.”
displayed as “
1
AUDIO
Press the AUDIO button during playback of a DVD video.
The current Audio settings are displayed for about 3 seconds.
Position number
Language
Recording system
Audio channel
Audio: 1 ENG PCM 2CH
Audio Out Select : Bitstream
Output sound format
See page 39 for a list of abbreviations
of the available languages and their
meaning.
2
CLEAR
Press the AUDIO or button while the
above Audio page is still displayed
(i.e. within 3 seconds).
Pressing one of these buttons cycles
through the available options.
Audio: 1 ENG PCM 2CH
Audio: 2 FRE
6CH
Audio: 3 SPA PCM 2CH
Use the button to cycle in the
opposite direction.
After making the desired settings,
either wait more than 3 seconds, or
press the CLEAR button to leave the
Audio page.
Selecting Sound Channels of Video CDs
A Video CD may have left and right sound channels with
different information (sound track on one channel,
dialogues on the other; or one language on one channel, and another on the second channel, etc.). You can
select the desired channel:
During playback, press AUDIO repeatedly to select the
sound channel.
AUDIO
AUDIO
ENTER
28
3
L. R
Both the left and right
channel are heard.
L
The left channel is heard.
R
The right channel is heard.
Getting Started
DVD
Notes:
Connections
• Some discs allow you to change Audio settings only via the
disc menu. In that case, press the MENU button and choose
the desired language.
• The Audio settings are not saved internally. When you switch
off the DVD Changer or open the disc tray, the DPC-6.1
returns to the default setting. See page 34.
• When you select an option that is not available on the
selected DVD video, the DPC-6.1 ignores your setting and
goes on using the previously selected language, etc.
Basic Playback
Recording Systems and Automatic Conversions
Here are all the Recording systems formats the DPC-6.1 supports as well as the conversions that will be carried according to the Recording system you select (see page 28).
Output sound conversion table (sampling frequency/quantization bit)
Audio settings on the setting screen (page 32, 36)
Sound recording system
DIGITAL
OUTPUT jack
Dolby Digital
Linear PCM
DVD videos
Audio CDs
PCM
DIGITAL
OUTPUT jack
ANALOG
OUTPUT jacks
DIGITAL
OUTPUT jack
ANALOG
OUTPUT jacks
Bitstream
48 kHz/16 bit
Bitstream
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/24 bit
48 kHz/16 bit
48 kHz/16 bit
–
48 kHz/24 bit
48 kHz/16 bit
48 kHz/16 bit
96 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
–
96 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
96 kHz/20bit
48 kHz/16 bit
48 kHz/16 bit
–
96 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
96 kHz/24 bit
48 kHz/16 bit
48 kHz/16 bit
–
96 kHz/24 bit
48 kHz/16 bit
48 kHz/16 bit
DTS
Bitstream
–
Bitstream
–
–
–
MPEG 2
Bitstream(7.1ch)
–
Bitstream(2ch)
48kHz/16bit
48kHz/16bit
48kHz/16bit
MPEG1
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
Linear PCM 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
DTS
Bitstream
(Noise)
Bitstream
(Noise)
Bitstream
(Noise)
Function Setup
VIDEO CDs
Analog 2ch Stereo Output
ANALOG
OUTPUT jacks
Advanced Playback
Discs
Bitstream
Others
29
DVD Video Functions (continued)
/ / /
Good evening!
Bon soir!
¡Buenas tardes!
Some DVD videos also contain subtitles – sometimes even in
several languages. Here is how to display them and select the
language (if several languages are available).
1
2
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
SUBTITLE ON/OFF
SUBTITLE
CLEAR
RC-426DV
DVD
Using the Subtitle Feature
Selecting the Subtitle Language
Turning Subtitles On or Off
1
1
SUBTITLE
Press the SUBTITLE button during playback.
The current subtitle setting is displayed
for about three seconds.
SUBTITLE
ON/OFF
Press the SUBTITLE ON/OFF button
during playback.
The current subtitle setting is displayed
for about three seconds.
Subtitle:
Subtitle: 1 ENG On
1 ENG On
Appears for
about 3 seconds
Language
Position number
Refer to the list of languages and their
abbreviations. See page 39.
Good morning!
2
SUBTITLE
Press the SUBTITLE or button during the
above page is displayed.
Repeatedly press the SUBTITLE or
button to cycle through the options.
You can only select a subtitle language for which there are data on the
selected DVD video.
Subtitles
The subtitles are displayed at the
bottom of the screen.
2
SUBTITLE
ON/OFF
Press the SUBTITLE ON/OFF button again
to turn the subtitles off.
Subtitle:
1 ENG Off
ENTER
Appears for
about 3 seconds
Subtitle : 1 ENG On
Subtitle : 2 FRE On
The subtitles disappear.
Subtitle : 3 SPA On
Notes:
You can also use
button to cycle
through the options in the opposite
direction.
3
30
CLEAR
Press the CLEAR button to hide the
above indication.
• Some DVD videos are set to display subtitles automatically. In
that case, you cannot switch off the subtitle function.
• For certain scenes, the subtitle function takes a little longer to
become effective (due to heavy data processing). Switching on subtitles may thus not always have an immediate
effect.
• Some DVD videos also allow you to select the language and
status of the subtitles via the disc menu.
• See page 39 for a list of abbreviations of the available
languages and their meaning.
• The Subtitle settings are not saved internally. When you
switch off the DVD Changer or open the disc tray, the DPC6.1 returns to the default settings. See page 34.
• When you select an option that is not available on the
selected DVD video, the DPC-6.1 ignores your setting and
goes on using the previously selected language, etc.
Using The On-Screen Display Functions
VCD
9
+10
0
DISPLAY
RC-426DV
DVD
DISPLAY
Press the DISPLAY button during playback.
Each time you press the DISPLAY button,
the on-screen display changes as follows.
Current title number
e.g.
e.g.
Operation
al status
Current title number
Current chapter number
Operational status
Elapsed time and
remaining time of
the current title
Play
Elapsed Remain
Elapsed time
Title : 3 0:10:15 0:50:45
and remaining
Chapter : 2 0:03:08 0:10:24
time of the
Chapter Repeat
current chapter
Current sound
Audio : 1 ENG
2CH
channel setting
Subtitle : 12 ENG Off
Current subtitle
Angle : 1
setting
Current angle
setting
VIDEO CD/Audio CD
See page 39 for a list of abbreviations of the
languages.
Current track number
Stop
Total 0:46:30
Press DISPLAY again to
leave this page.
Operational
status
Bit Rate: 0
Total playing
time of the
disc
10 6.0 Mbps
Tip:
When you play a disc that contains text data, the unit displays
text information, such as the disc title and song titles. If the disc
does not contain any text, the unit displays “No Text”.
Press DISPLAY again to leave this page.
VIDEO CD/
Audio CD
Current track number
Playback
mode
Operational status
e.g.
Elapsed time
and remaining
Play
time of the
Elapsed Remain
current track
Track : 3 0:01:20 0:02:00
Disc
0:05:12 0:43:00
Track Repeat
Function Setup
Bit Rate (Mbit/sec): Amount of picture, sound and
subtitle data on the DVD video transferred per
second. The larger the value, the more data need to
be processed. Please note that the amount of data
provides no information about the picture quality.
Advanced Playback
Press DISPLAY again to
leave this page.
Track : 1
CD
Playback
mode
Current chapter number
e.g.
VCD
You can also view the elapsed time, remaining time, and
setting status of the disc on the TV screen. Though the
operation is almost exactly the same as for requesting
general information, please note that you need to start
playback before being able to access this information.
DVD video
DVD video
Stop
8
Basic Playback
Stop playback and press the DISPLAY
button.
Each time you press the DISPLAY
button, the on-screen display changes
as follows:
Title : 2
Chapter : 1
3
More Specific Information: Remaining Time and Setting Status
This operation allows you to view the current title number, track number, and total playing time of the disc on
the TV screen.
DISPLAY
6
7
REMOTE CONTROLLER
CD
Requesting Basic Information
5
Connections
DVD
2
4
Getting Started
Information about a disc and its operational status can be monitored
on your TV screen. If you want to take advantage of this feature for
audio CDs, please remember to connect the DPC-6.1 to your TV set
(see pages 10 and 11) and to switch it on.
Please note that the information provided on screen is only for reference purposes and cannot be changed.
1
Elapsed time
and remaining
time of the disc
Others
Press DISPLAY again to leave this page.
31
Advanced Settings
SETUP
ENTER
RETURN
The DPC-6.1 contains a lot more functions than have been covered so
far. Most of these functions can only be accessed via the on-screen
menu. Please note that not all available functions apply to all disc
types supported by the DPC-6.1. Setting the language, for instance, has
no effect for audio CDs.
1
2
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
/ / /
RC-426DV
Setting Procedure
1
Switch on your TV set.
4
ENTER
2
SETUP
Use the / buttons to choose a
function below the selected icon, and
confirm by pressing the ENTER button.
Stop playback and press the SETUP
button.
The following on-screen menu appears:
ENTER
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
3
ENTER
ENG
ENG
ENG
---
5
Use the / buttons to select the
menu heading (icon) that provides
access to the desired function.
See the next page for an overview of
the available functions. Here is what
the icons stand for:
ENTER
Enter the desired value with the /
buttons and confirm by pressing the
ENTER button.
For the OPERATION function, you will
also need the / buttons. The exact
procedure will be explained in that
section.
ENTER
Language-related settings.
6
Picture-related settings.
7
Repeat steps 4 and 5 to change other
settings.
SETUP
Press the SETUP button to switch off the
on-screen menu.
Press the RETURN button to return to
the previous display.
RETURN
Audio output settings.
Note:
Settings related to the on-screen menu
function.
General utility settings.
32
Though the SETUP button may also work during normal playback, certain functions may not be accessible. In that case, a
warning message is displayed. Stop playback and press SETUP
again to be able to select the desired function.
Details
On-Screen Language
DVD
Disc Menu Language
VCD
CD
CD
Page
34
Audio Language
DVD
Allows you to select the sound track language.
34
Subtitle Language
DVD
Allows you to select the subtitle language.
35
TV Shape
DVD
Allows you to adapt the picture size to the aspect ratio of
your TV.
35
Black Level
DVD
VCD
Allows you to set the “blackness” of the screen.
35
Audio Out Select
DVD
VCD
Allows you to select the audio outputs (digital or analog)
and/or the output format of the digital audio data.
36
Dynamic Range Control
DVD
Allows you to reduce the dynamic range of the audio data
(i.e. to reduce the difference between loud and soft sounds).
36
Karaoke Vocal
DVD
Allows you to switch on or mute the vocal track of a DVD
Karaoke disc.
36
Extended Audio Features
DVD
Allows you to activate or mute the Extended Audio track
for visually impaired persons.
36
On-Screen Displays
DVD
VCD
CD
Allows you to decide against having the operation status
icons displayed on the TV screen.
37
OSD Background Color
DVD
VCD
CD
Allows you to select the background color for on-screen
displays.
37
Extended Subtitle Features
DVD
Allows you to activate or switch off special subtitles for
hearing-impaired persons.
37
Screen Saver
DVD
Allows you to switch on or off the screen saver function.
37
Pause/Still
DVD
Allows you to select the resolution of still pictures. (Field/
Frame)
37
Parental Lock
DVD
Allows you to set on or switch off the Parental Lock
function.
37
Title Stop
DVD
Allows you to switch on or off a feature that automatically
stops playback after a Title is finished.
38
To select to playback a PBC- controllable video CD.
38
PBC
VCD
VCD
CD
Others
Allows you to select the language to be used by the disc
menus (menus included on the discs you are playing back).
Function Setup
DVD
Advanced Playback
34
Basic Playback
Allows you to select the language of the on-screen
displays.
Connections
Setting
VCD
Getting Started
DVD
33
Advanced Settings (continued)
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
---
LANGUAGE Functions
On-Screen Language DVD
VCD
CD
This function allows you to select the language for the
on-screen displays.
• English
• French
• Spanish
Disc Menu Language DVD
This function allows you to select the language used by
the disc menus. Note that you can only select a language supported by the DVD video in question.
• English
• French
• Spanish
• Others*
* Others : To select another language than the above,
proceed as follows:
a) Press the ENTER button.
b) See the list on page 39 for the abbreviation of the
desired language.
c) Enter the first character of the abbreviation with
the / buttons (see the Code field).
d) Move the cursor to the second position and use
/ for entering the second character of the
abbreviation.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
PA
ENG
---
English
French
Spanish
Others
Code
P A
e) Press the ENTER button.
Note:
Some DVD videos may not include the desired language. In
that case, the DVD Changer automatically switches to the
disc’s default disc menu language.
34
Audio Language DVD
If the DVD video you are playing back contains multilingual soundtracks, Audio Language allows you to select
the desired language.
• English
• French
• Spanish
• Others*
* Others : To select another language than the above,
see steps (a) – (e) under “Disc Menu Language”.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
PA
---
English
French
Spanish
Others
Code
P A
Note:
Some DVD videos could be played back in a different language than the one you selected. This is usually due to the fact
that the disc contains a preset language selection.
Getting Started
PICTURE
TV Shape 4:3LB
Black Level Nrml
PICTURE Settings
Use this function to select the subtitle language, or to
switch the subtitles off altogether.
• English
• French
• Spanish
• No Subtitle (subtitles are switched off)
• Others: To select another language than the above,
see steps (a) – (e) under “Disc Menu Language”.
This is where you can specify the shape of your TV
screen. This is important for determining whether you
would like to see the whole picture, or a slightly bigger
version.
4:3 Letterbox:
Select this setting if you own a standard
4:3 TV set and want to see the whole
picture. In that case, masking bars are
inserted above and below the picture.
4:3 Normal:
Select this setting for a standard 4:3 TV set
if you want the picture to fill the entire
screen. In that case, the left and right
borders may fall outside the screen’s
scope.
16:9 Widescreen:
Select this setting for a 16:9 wide-screen TV.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
PA
English
French
Spanish
No Subtitles
Others
Code
P A
Basic Playback
TV Shape DVD
Connections
Subtitle Language DVD
Notes:
Notes:
• The picture size is preset on the DVD video. Therefore, the
playback picture may not conform to the picture size you
select.
• When you play DVD videos that only contain 4:3 picture size
information, any other TV Shape setting you may select is
ignored.
• If you select “16:9 Widescreen” while your TV set is equipped
with a 4:3 screen, the picture will be horizontally distorted
(compressed) during playback. Always set the TV Shape
function according to the TV set your are using.
Black Level DVD
VCD
Function Setup
This function allows you to optimize the black picture
content (true black instead of dark gray), and hence
the video quality.
Enhanced: Enhanced black level. (0 IRE)
Normal:
Standard black level. (7.5 IRE)
Advanced Playback
• If DVD video contains a preset subtitle language setting, your
selection is ignored.
• Some DVD videos allow you to change the subtitle language
only via the disc menu. If so, press the MENU button and
choose the desired subtitle language from the disc menu.
Others
35
Advanced Settings (continued)
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
AUDIO Settings
Audio Out Select DVD
VCD
CD
This function allows you to select the outputs and format
for audio playback. Always select the setting that best
matches your amplifier’s capabilities and input connectors. The “Bitstream” and “PCM” options refer to the
DPC-6.1’s digital outputs. See also “Other Audio Playback Options” on page 12.
Bitstream:
Select this option if your amplifier is
equipped with a digital input (optical or
coaxial) and a Dolby Digital, DTS, MPEG1, or
MPEG2 decoder. The DPC-6.1 outputs
digital audio information in the Bitstream
format when you play back a DVD video
with Dolby Digital, DTS, MPEG1, or MPEG2
encoding.
Analog 2Ch: Select this option if the DPC-6.1 is connected to the audio inputs of your TV set, or
an analog input pair of your external
amplifier. Note that even this analog
connection may allow you to take advantage of the amplifier’s Dolby Pro Logic
processor.
PCM:
Select this option if the DPC-6.1 is connected to a digital input of your amplifier
and if you would like the sound to be
played back in stereo (e.g. for audio CDs).
If you select “PCM”, the audio data of DVD
videos with Dolby Digital, MPEG1, or MPEG2
encoding is automatically converted to 2channel PCM, so that you lose the surround
information. See also the table on page 29.
Dynamic Range Control DVD
Dynamic Range Control allows you to “compress” the
dynamic range of a DVD’s sound track, so that you can
lower the volume without losing extremely soft signals.
This is especially useful when you are watching a movie
late at night.
Off: The full dynamic range is maintained.
On: Low-level signals are slightly boosted so as to
remain audible at a low volume setting.
Notes:
• This function is only available during playback of Dolby
Digital-encoded DVD videos.
• The degree of dynamic range reduction may differ depending on the DVD video.
36
Karaoke Vocal DVD
DVD Karaoke discs sometimes also contain a vocal track
you probably don’t need for Karaoke applications. That is
why the DPC-6.1 allows you to switch the lead vocal off.
Off: The lead vocal track is muted.
On: If available on the selected DVD Karaoke disc, the
lead vocal track is output.
Notes:
• The Karaoke Vocal feature is only available during playback
of Dolby Digital-encoded (multi-channel) DVD Karaoke
discs.
• For optimum Karaoke enjoyment, be sure to use appropriate
audio equipment, such as an external amplifier.
Extended Audio Feature DVD
Some DVD videos contain a special track that describes
the on-screen actions for visually impaired persons. Your
DPC-6.1 is set to automatically output this track if available. If this is not necessary, switch this function off.
Off: The Extended Audio Feature track is muted.
On: The Extended Audio Feature is active.
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
On
Gray
Off
On
DISPLAY Settings
OPERATION Settings
VCD
Pause/Still DVD
CD
This function allows you to activate or suppress the
display of on-screen icons that inform you about the
operational status.
Off: Operational icons or messages (e.g. “Play”, “ ”)
are not displayed.
On: Operational icons or messages (e.g. “Play”, “ ”)
are displayed on-screen.
DVD
VCD
CD
Extended Subtitle Features
DVD
Screen Saver
DVD
DVD videos equipped with the Parental Lock function
allow you to decide what exactly can be viewed on
your DPC-6.1, which is especially useful if you have
children. For example: you could select a level where
violent scenes unsuitable for children are skipped and
replaced with more suitable scenes, or prevent playback of a disc altogether. Whether the Parental Lock
function actually works depends on the DVD video in
question, because it needs to contain the software
capable of responding to this function.
Parental Lock is secured by means of a 4-digit code to
avoid that your children bypass this function.
Ask your dealer or rental service for details about the
Parental Lock support of a given DVD video. Also note
that the meaning of the Parental Lock levels depends
on the country whose rating standards are used by the
DVD video.
Off: The Parental Lock feature is not active. To select
the “Off” setting, perform steps 1 and 2 below.
On: Switching on Parental Lock involves specifying the
highest level that can be viewed. You cannot just
switch this function on without selecting a level.
Careful: if you only carry out steps 1 and 2,
Parental Lock will be switched off. Be sure to
perform steps 1 – 4 below.
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
Off
On
Function Setup
The screen saver function protects your TV screen from
burn-in of images that are displayed for too long. If you
also work with a computer, you probably know how it
works. The screen saver is especially useful if you often
use the Pause (“still”) function and tend to forget to
switch it off. See page 16.
Off: The screen saver will not blank out the screen
after the delay time has elapsed.
On: The screen saver will come on whenever necessary.
DVD
Advanced Playback
Some DVD videos contain special subtitles, an enhancement of closed captioning for hearing-impaired persons.
The DVD Changer automatically displays these special
subtitles.
Off: The special subtitles are not displayed.
On: The special subtitles are displayed.
Parental Lock
Basic Playback
This function allows you to select the background color
for the on-screen menu.
Blue: Blue background.
Gray: Gray background.
This function allows you to obtain an even better quality
for still pictures. Such pictures are displayed when you
pause playback of a DVD video. See also page 16.
Auto:
For normal use. The image quality should be
sufficient for most applications.
Frame: Still pictures are clearer thanks to a higher
resolution.
Connections
On-Screen Displays DVD
OSD Background Color
Auto
Off
Off
On
Getting Started
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
Security Code
2. Enter the 4-digit code via the numeric buttons on the
remote controller, and press the ENTER button.
If you entered the wrong code, press the CLEAR
button before pressing ENTER, and enter your 4-digit
code again.
Others
1. Press the ENTER button.
37
Advanced Settings (continued)
OPERATION Settings (continued)
3. Press the / buttons to select the country whose
standards were used to rate the DVD video.
■ Changing the Parental Lock level
Perform steps 2 – 4 above.
See the information supplied with the DVD for details.
■ Changing the 4-digit Code
Viewable
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
4. Press the / buttons to select the Parental Lock
level, then press the ENTER button.
Locked
Viewable
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
It is now impossible to play back DVD videos rated
higher than the selected level. For example, when you
select level 7 (“Viewable”), discs rated higher than level
7 are locked out (“Locked”) and cannot be played
back.
The Parental Lock level is equivalent to the following USA
movie ratings:
Level 7: NC-17
Level 6: R
Level 4: PG 13
Level 3: PG
Level 1: G
The parental lock levels for “Canada” are included for
future use. Since they are different from the US ratings,
carefully check what they correspond to before buying
new DVD videos with the Canadian Parental Lock
system as they become available.
38
a) After selecting a level or “Off,” press the STOP button
four times, followed by the ENTER button.
STOP
STOP
STOP
STOP
ENTER
The current 4-digit code is cleared.
b) Press the numeric buttons to enter a new 4-digit
security code.
c) Press the ENTER button.
Be sure to either memorize this code or to write down
and store it in a safe place.
Title Stop DVD
This function allows you to specify what happens when
the DPC-6.1 reaches the end of a DVD Title.
Off: The DPC-6.1 continues after playback of a Title is
completed. Selecting this option also changes the
and UP
buttons.
behavior of the DOWN
See “Selecting the Next/Previous Chapter or
Track” on page 19.
On: The DPC-6.1 stops after playback of a title is
completed.
PBC (Playback Control)
Off:
On:
VCD
The menu screen of the selected Video CD (if
available) is not displayed.
The menu screen of a Video CD with PBC functionality is displayed on screen.
Table of Languages
Getting Started
Table of Languages and Their Abbreviations
–––
Abbreviation
of the
Language
Language
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
Lingala
Laotian
Lithuanian
Latvian,Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto,Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Abbreviation
of the
Language
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Language
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sudanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Function Setup
Language
Advanced Playback
Abbreviation
of the
Language
Basic Playback
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Language
Connections
Abbreviation
of the
Language
Others
39
Troubleshooting
If your DPC-6.1 does not seem to work as expected, check the following table for the possible cause before
contacting your ONKYO/Integra dealer or service.
Symptoms and Corrections
Symptom
Cause
Correction
No power.
• The power plug is disconnected.
• Insert the power plug firmly.
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so that the DPC-6.1’s picture
appears on the TV screen.
• The video cable is not securely
connected.
• Connect the video cable into the jacks
securely.
• The DPC-6.1 has not been selected as
input source on the amplifier or
receiver.
• Select the input source on the amplifier or
receiver that corresponds to the input(s)
the DPC-6.1 is connected to.
• The audio cables are not securely
connected.
• Connect the audio cable securely.
No sound.
• The device you connected the DPC-6.1’s • Switch on the amplifier or receiver.
audio outputs to is switched off.
Page
10, 11
14
10-13
14
10-13
–
29,32
36
• The output sound type setting is not
correct.
• Select the appropriate audio settings.
• The disc is dirty.
• Eject the disc and clean it.
9
• The Fast Forward or Fast Reverse
function is active.
• Sometimes a small amount of picture
distortion may be noticeable. This is not a
malfunction.
–
Unstable brightness or
picture noise.
• This is caused by the copy protection
signal.
• Connect the DPC-6.1 directly to the TV.
Never route its picture signal via a VCR or
other video device (“daisy chain”).
10
The DPC-6.1 won’t start
playback.
• No disc is inserted.
• Insert a disc. (Check whether the “DVD”,
“VCD” or “CD” indicator lights.)
42
• The inserted disc cannot be read.
• Insert a playable disc. (Check the disc
type and color system.)
9
• The disc is placed upside down.
• Insert the disc with the playback side down.
14
• The disc is not placed within the guide.
• Place the disc correctly inside the guide.
14
• The disc is dirty.
• Clean the disc.
9
• The Parental Lock function is on.
• Cancel the Parental Lock function or
select another Parental Lock level.
You hear a voice that
describes the action.
• The DVD video contains an Extended
Audio Feature track that is being
played back.
• Switch off the Extended Audio Feature.
36
The buttons do not
work.
• Power supply fluctuations or other
abnormalities such as static electricity
may interrupt correct operation.
• Turn the power on or off with the POWER
button. Or disconnect the power plug
and insert it into the wall outlet again.
–
The remote controller
does not work properly.
• The remote controller is not pointed at
the remote sensor of the DVD Changer.
• Point the remote controller at the remote
sensor of the DVD Changer.
8
• The remote controller is too far from the
DVD Changer.
• Operate the remote controller within
about 5 m.
8
• The batteries in the remote controller
are exhausted.
• Replace the batteries with new ones.
8
The picture
occasionally distorts.
32, 33
37
This unit contains a sensitive micr ocomputer that, under certain circumstances, might fail to operate due to excessive
noise interference. In such case, disconnect the power cord from the wall outlet, wait five seconds and connect the
power cord again.
40
Identification of Controls
See the pages in [ ] for details.
Getting Started
Front Panel
Repeat button [21]
Open/Cose button [14]
Next Selection button [24]
Dimmer button [42]
Display button [31]
Standby/On indicator [14]
Pause button[16]
Skip buttons [16]
Play button
[15-20, 22, 26]
Display [42]
Open /Close
Pause
Play
Stop
Next Selection
CD Play
button [25]
Power
Power button
[14]
Repeat
Standby/On
On
CD Play
Dimmer Display
Disc Skip
Disc 1
Disc 2
Disc 3
Disc 4
Disc 5
Disc 6
Of f
Disc1-6
buttons [14, 15]
Connections
Standby/On
button [14]
Stop button [16]
Disc Skip button
[14, 24]
Direct Digital Path
DP C -6.1
Basic Playback
Disc tray [14]
Rear Panel
S VIDEO OUTPUT jack [11]
VIDEO OUTPUT jack [11]
VIDEO OUTPUT
AC I NLET
Y
PB
PR
S VIDEO
VIDEO
COMPONENT
ANALOG
OUTPUT
DIGITAL
OUTPUT
COAXIAL
OPTICAL
L
Advanced Playback
COMPONENT
VIDEO OUT jacks
Y PB PR [11]
R
REGIONAL CODE 1
Region number
(Refer to page 4 for detail)
DIGITAL OPTICAL AUDIO OUTPUT terminal
[12, 13]
DIGITAL COAXIAL AUDIO OUTPUT jack
[12, 13]
Function Setup
ANALOG OUTPUT
(L/R) jacks
[10, 11, 12]
Others
41
Identification of Controls (continued)
Display
• Pressing of the DIMMER button changes the
brightness of the Display.
Normal
Dimmed
Total playing time/remaining time/
Memory indicators
A-B REPEAT indicator
Track number indicator
Chapter number indicator
REPEAT CD indicator
Angle icon indicator
Group number indicator
Title number indicator
NEXT DISC indicator
VCD/CD indicator
DVD indicator
Operating status
indicator
Disc indicator*
* DISC INDICATORS ATTENTION:
When the tray is closed, the unit will search
to play the first disc loaded; all Disc Indicator will be illuminated. As the unit accesses
the disc locations the indicators will either
go out or stay lit to indicate the presence of
a disc. An indicator may stay lit even if there
is no disc loaded until the player has
accessed that location. This is not malfunction.
■ The indicators vary depending on the kinds of discs you play.
■ DVD video
■ VIDEO CD
■ Audio CD
• When closing the disc tray:
• When closing the disc tray:
• When closing the disc tray:
Example
Example
Example
Total number of titles
Total playing
time of the disc
Total number
of tracks
Total playing time of
the disc
• During playback:
• During playback:
• During playback:
Example
Example
Example
Playing chapter 3
in title 2
Elapsed time of
the current title
Some DVD videos may not display the
chapter numbers or elapsed time.
42
Total number of
tracks
Playing track 6
Elapsed time of
the current title
Some VIDEO CDs may not display the
track numbers or elapsed time.
Playing track 6
Elapsed time of
the current title
Most steps in this manual need to be per formed using the supplied remote contr oller. That is why the functions
of the remote contr oller’s buttons are explained in the relative chapters and sections. See the pages in [ ] for
details.
Getting Started
Remote Controller
STOP button [16, 17, 38]
UP button [19]
PLAY button [15-20,22,26]
FF button [16]
POWER button [14]
OPEN/CLOSE button [14]
FR
PLAY
FF
DOWN
STOP
UP
PAUSE/STEP
FR button [16]
PAUSE/STEP button [16]
SLOW
DOWN button [19]
SLOW buttons [17]
MENU
SETUP
MENU button* [15]
AUDIO button [28]
SETUP button [32]
ENTER
TOP MENU
RETURN
RETURN button [27, 32]
AUDIO
ANGLE
SUBTITLE
SUBTITLE
ON/OFF
ANGLE button [27]
SUBTITLE button [30]
Numeric buttons
[18, 20, 22, 24, 26]
1
2
MEMORY
ZOOM
CLEAR
A-B
REPEAT
3
5
6
7
8
9
+10
0
SEARCH
MEMORY button [22]
RANDOM button [26]
CLEAR button [21, 26-28, 30]
ZOOM button [27]
REPEAT button [21]
A-B button [21]
DISPLAY
DISPLAY button [31]
DIMMER
DIMMER button [42]
CD PLAY
CD PLAY button [25]
DISC number buttons [14-15, 24]
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 6
DISC
NEXT
SELECTION
REMOTE CONTROLLER
DISC +/— button [14, 24]
NEXT SELECTION button [24]
Advanced Playback
4
SEARCH button [18-20, 26]
SUBTITLE ON/OFF button [30]
RANDOM
Basic Playback
/ / / buttons [15-16,18,
22-23, 27-28, 30, 32, 34-38
ENTER button [18, 22, 32, 38]
TOP MENU button [18]
Connections
OPEN/
CLOSE
POWER
RC-426DV
Function Setup
* MENU button
Others
Use the MENU button to
display the menu screen of
the currently selected DVD
video. See “Locating a Title
Using the Title Menu” on
page 18 for details.
43
Specifications
DVD Changer/Outputs
DVD Changer
Power supply
AC 120 V, 60 Hz
Power consumption
19 W
Weight
7.0 kg, 15.4 lbs
External dimensions (W/H/D)
435 X 131 X 433 mm, 17-1/8" X 5-3/16" X 17-1/16"
Signal system
Standard NTSC
Regional restriction code
1
Laser
Semiconductor laser, wavelength 650 nm
Frequency range (digital audio)
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Audio CD :
4 Hz to 20 kHz
Signal-to-noise ratio (digital audio)
96 dB
Audio dynamic range (digital audio)
90 dB
Harmonic distortion (digital audio)
0.01 %
Wow and flutter
Below measurable level (±0.001 % (W.PEAK))
Operating conditions
Temperature: 5˚C to 35˚C (41˚F to 95 ˚F), Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack X 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin X 1
(C) 0.286 V (p-p), 75 Ω
Component Video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack X 1
(PB)/(PR) 0.7 V (p-p), 75 Ω
Digital Audio output (optical)
Optical connector X 1
Digital Audio output (coaxial)
0.5 V (p-p), 75 Ω, pin jack X 1
Audio output (analog audio)
2.0 V (rms), 470 Ω, pin jack (L, R) X 1
• Design and specifications are subject to change without notice.
Integra Division of
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramesy, N.J. 07446, U.S.A.
Tel: 201-825-7950 Fax: 201-825-8150 E-mail: integra@onkyousa.com
Integra Division of
ONKYO CORPORATION
Sales & Product Planning Div. :
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
SN 29342929
I0006-1
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising