Lynx | LOHI | manual | Lynx LOHI Manual

Lynx LOHI Manual
LOHI
INSTALLATION INSTRUCTION
CAUTION: Before installing ventilator read the HOOD INSTALLATION
INSTRUCTIONS.
PARTS INCLUDED: 1 - Ventilator Assembly
4 - #8 x ½ Pan Head SMS
1 – Wire Harness (11500.00)
1 – Wire Tie
A
1) Install Hood & Transition per hood installation instruction.
2) Remove parts from carton. Remove all corrugated packaging shims between motor and
housing.
3) Rotate ventilator wheels to confirm they rotate freely.
4) Connect Wire Harness #11500.00 to Hood Receptacle Box.
5) Install ventilator per HOOD INSTALLATION INSTRUCTION using 2- screws.
6) Connect Ventilator to Hood Receptacle Plug on Front Panel using Wire Harness #11500.00, (if
required excessive wires shall be attached to blower body flange notch at point - A using wire tie,
twist wire 3 to 4 times to secure excess wire – see picture).
7) Check operation of ventilator per HOOD INSTALLATION INSTRUCTIONS.
IC
GREY
BLACK
MOTOR
BLUE
RED
YELLOW
WHITE
GREEN
RED
WHITE
WHITE
BLUE
WHITE
WHITE
BODY
BLUE
GREEN
WHITE
WHITE
BLACK
RED
YELLOW
BLUE
RED
YELLOW
WHITE
YELLOW - LO
RED - MED
BLUE - HI
WHITE - COM
TO HOOD
RECEPTACLE
PLUG
RED - LO
BLUE - MED
BLACK - HI
WHITE - COM
MOTOR
GREY
BLACK
IC
WIRING
LOHI
www.lynxgrills.com
Page 1 of 1
WIRE HARNESS
P/N 11500.00
Lynx Professional Grills
6023 E. Bandini Blvd.
Commerce, CA 90040
Service: (888) Buy-Lynx
(888-289-5969)
Fax: (323) 838-1778
P/N 11863.00 Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising