Lynx | 30" Sedona Built-in | Product Spec | Lynx 30" Sedona Built-in Product Spec

Lynx 30" Sedona Built-in Product Spec
SEDONA BY LYNX TM SERIES
30" SEDONA BUILT-IN GRILL
WITH 1 PROSEAR INFRARED BURNER AND 1 STAINLESS STEEL BURNER (L500PS)
L500PS PRODUCT OVERVIEW
OPEN VIEW
■
Precise power—one ProSear™ Infrared Burner and one Stainless
Steel Burner combining to provide up to 46,000 BTU
■
Consistent assurance—direct spark ignition with battery backup
■
Perfect clarity—dual halogen grill surface lights
■
Quick visibility—temperature gauge
■
Easy opening—Lynx Hood Assist
■
Steadfast durability—heavy-duty welded construction eliminates
gaps where grease can collect
■
Ample capacity—733 square inches of cooking surface (508 primary,
225 secondary)
■
Beautiful illumination—blue-lit control knobs
■
Steady performance—heat-stabilizing design
■
Smooth opening—fluid rotation handle
■
Premier platform—stainless steel grilling grates
FOR A COMPLIMENTARY CUSTOM DESIGN FOR YOUR OUTDOOR KITCHEN, VISIT LYNXGRILLS.COM/DESIGN-CENTER
30" SEDONA BUILT-IN GRILL
WITH 1 PROSEAR INFRARED BURNER AND 1 STAINLESS STEEL BURNER (L500PS)
L500PS PRODUCT FEATURES
The Sedona by LynxTM Series is always evolving to be the best at something new. That philosophy is reflected in its features.
We’ve refined these features to give you a grilling experience that’s both simple and stunning.
PROSEARTM INFRARED BURNER
STAINLESS STEEL BURNERS
CERAMIC RADIANT BRIQUETTES
SEAMLESS WELDED CONSTRUCTION
EXPANSIVE GRILLING SURFACE
SPARK IGNITION SYSTEM
LYNX HOOD ASSIST
INTEGRATED ILLUMINATION
CUT-OUT DIMENSIONS: WIDTH: 29" / HEIGHT: 10" / DEPTH: 21.25"
SHIPPING DIMENSIONS: WIDTH 35" / HEIGHT 33.5" / DEPTH 30"
SHIPPING WEIGHT: 168 POUNDS
GAS REQUIREMENTS: SHIPS IN LIQUID PROPANE OR NATURAL GAS
FROM FACTORY
L500 ISLAND PREPARATION
29”
231/4”
36”
21/4”
211/4”
5”
PRODUCT SPECIFICATIONS & INSTALLATION
PRODUCT TECHNICAL SPECIFICATIONS
FOR MORE
INFORMATION ON
SEDONA BY LYNXTM SERIES
PRODUCT FEATURES,
PLEASE VISIT
LYNXGRILLS.COM
31/2”
41/2”
3”
Insulated
Jacket
3”
min.
Access
Doors
115/8”
19”
363/8”
min.
* 2” round hole must be
located at rear of grill cutout. 120V GFI
outlet must be located within 6’ of the
2” hole.
COUNTERTOP NOTCH DETAIL
10
2”
Grill*
281/4”
INSULATING JACKET
BUILT-IN GRILL WITH INSULATING JACKET
Model
L500
A
29"
Insulating
Jacket
B
10"
C
21 ¼"
C
A
5”
3”
ELECTRICAL REQUIREMENTS: INSTALLATION REQUIRES AN OUTDOOR
4-1/2"
120V/15GFI ELECTRICAL OUTLET ADJACENT TO PRODUCT
B
COOKING CONFIGURATION: BUILT-IN GRILL WITH 1 PROSEAR INFRARED
BURNER AND 1 STAINLESS STEEL BURNER
Note: Insulating jacket required for all grills installed into a combustible enclosure. For natural gas grills,
Lynx recommends using ¾" gas lines. Side burners may be rotated 90 degrees. See installation manuals for details.
FOR EVEN MORE ON THIS PRODUCT AND OTHER COMPLIMENTARY LYNX PRODUCTS, VIST LYNXGRILLS.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising