Lynx | 36" Sedona Built-in | Product Spec | Lynx 36" Sedona Built-in Product Spec

Lynx 36" Sedona Built-in Product Spec
SEDONA BY LYNX TM SERIES
36" SEDONA BUILT-IN GRILL
WITH ROTISSERIE, 1 PROSEAR INFRARED BURNER AND 2 STAINLESS STEEL BURNERS (L600PSR)
L600PSR PRODUCT OVERVIEW
■
■
■
■
■
■
■
■
■
■
OPEN VIEW
■
■
Precise power—one ProSear™ Infrared Burner and two Stainless
Steel Burners combining to provide up to 69,000 BTU
Consistent assurance—direct spark ignition with battery backup
Perfect clarity—dual halogen grill surface lights
Quick visibility—temperature gauge
Easy opening—Lynx Hood Assist
Ready rotisserie—dedicated rotisserie back burner, motor, spit rods,
and forks
Ample capacity—891 square inches of cooking surface (618 primary,
273 secondary)
Beautiful illumination—blue-lit control knobs
Steady performance—heat-stabilizing design
Smooth opening—fluid rotation handle
Premier platform—stainless steel grilling grates
Steadfast durability—heavy-duty welded construction eliminates
gaps where grease can collect
FOR A COMPLIMENTARY CUSTOM DESIGN FOR YOUR OUTDOOR KITCHEN, VISIT LYNXGRILLS.COM/DESIGN-CENTER
36" SEDONA BUILT-IN GRILL
WITH ROTISSERIE, 1 PROSEAR INFRARED BURNER AND 2 STAINLESS STEEL BURNERS (L600PSR)
L600PSR PRODUCT FEATURES
The Sedona by LynxTM Series is always evolving to be the best at something new. That philosophy is reflected in its features.
We’ve refined these features to give you a grilling experience that’s both simple and stunning.
PROSEARTM INFRARED BURNER
STAINLESS STEEL BURNERS
CERAMIC RADIANT BRIQUETTES
SEAMLESS WELDED CONSTRUCTION
EXPANSIVE GRILLING SURFACE
ROTISSERIE SYSTEM
SPARK IGNITION SYSTEM
LYNX HOOD ASSIST
PRODUCT TECHNICAL SPECIFICATIONS
INTEGRATED ILLUMINATION
CUT-OUT DIMENSIONS: WIDTH: 35” / HEIGHT: 10” / DEPTH: 21.25”
SHIPPING DIMENSIONS: WIDTH 33.5” / HEIGHT 41” / DEPTH 30”
SHIPPING WEIGHT: 180 POUNDS
GAS REQUIREMENTS: SHIPS IN LIQUID PROPANE OR NATURAL GAS
FROM FACTORY
L600 ISLAND PREPARATION
35”
231/4”
42”
21/4”
5”
211/4”
31/2”
PRODUCT SPECIFICATIONS & INSTALLATION
FOR MORE
INFORMATION ON
SEDONA BY LYNXTM SERIES
PRODUCT FEATURES,
PLEASE VISIT
LYNXGRILLS.COM
41/2”
3”
Insulated
Jacket
3”
min.
115/8”
Access
Doors
* 2" round hole must be
located at rear of grill cutout. 120V GFI
outlet must be located within 6' of the
2" hole.
COUNTERTOP NOTCH DETAIL
10
2”
Grill*
19”
363/8”
min.
333/4”
INSULATING JACKET
BUILT-IN GRILL WITH INSULATING JACKET
Model
L600
A
35"
Insulating
Jacket
B
10"
C
21 ¼"
C
A
5”
3”
ELECTRICAL REQUIREMENTS: INSTALLATION REQUIRES AN OUTDOOR
4-1/2"
120V/15GFI ELECTRICAL OUTLET ADJACENT TO PRODUCT
B
COOKING CONFIGURATION: BUILT-IN GRILL WITH 1 PROSEAR INFRARED
BURNER AND 1 STAINLESS STEEL BURNER
Note: Insulating jacket required for all grills installed into a combustible enclosure. For natural gas grills,
Lynx recommends using ¾" gas lines. Side burners may be rotated 90 degrees. See installation manuals for details.
FOR EVEN MORE ON THIS PRODUCT AND OTHER COMPLIMENTARY LYNX PRODUCTS, VIST LYNXGRILLS.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising