DFI | KS150-BT Installation Guide | manual | Dfi KS150-BT Installation Guide Manual

Dfi KS150-BT Installation Guide Manual
KS150-BT Installation Guide
Package Contents
• 15" Touch Panel PC
• Poron foam
• 1 Chassis Panel Mount Bracket
DFI reserves the right to change the specifications at any time prior to
the product's release. For the latest revision and for more details of the
installation process, please refer to the user's manual on the website.
www.dfi.com
1
Installing the SATA Drive
1. The SATA drive bay is located on the system.
SATA drive bay
2. Remove the 4 mounting screws on the HDD bracket and then put them
in a safe place for later use.
Mounting screw
2
3. Insert the SATA drive into the HDD bracket and connect the SATA power/
data connector on the SATA drive to the SATA power/data cable secured
on the HDD bracket.
SATA drive
HDD bracket
SATA power/data cable
4. Then, align mounting holes of the SATA drive with mounting holes on
the back side of the HDD bracket and use the provided mounting screws
to secure the drive in place.
Mounting screw
3
5. Place the SATA drive with the HDD bracket into the system. Tighten the
4 mounting screws you removed in step 2.
Mounting screw
4
Board Layout and Jumper Settings
Digital I/O
CPU Fan
DC-in
(JP17) (JP20)
1
1
2
19
1
Standby
Power LED
1
1
1
(JP18)
System
Fan
11
12
Clear CMOS Data (JP7)
1
ASMedia
ASM1442
BGA 1170
1
SMBus
6
5
2
1
DDR3L_1 SODIMM
DDR3L_2 SODIMM
USB 0-1 Power
Select (JP4)
USB 3.0
USB 3
Intel
USB 3 Power
Select (JP3)
1
USB 6-7 Power Select
(JP10)
SATA DOM Power Select (JP12)
Auto Power-on Select
(JP13)
LPC
2
1
LAN 2
Intel
WGI210AT
3
12
9
12
11
USB 4-5
Line-out 2
1
3
2
1
10
9
1
1
2
SATA
Power 0
SATA 2.0
SATA 0
1
10
10
9
1
1
(JP15)
1
1
1
6 5
4
(JP10)
1
(JP15)
(JP16)
(JP19)
(JP21)
COM 1
10
(JP13)
1
(JP16)
21
LAN2
LAN2
LAN1
LAN1
State
State
State
State
1
(JP21)
(JP19)
39
40
1
2
2 1
(JP12)
1
1
9
87
LCD/Inverter Power
1
2
10 12
1
Mini PCIe/mSATA
Power Select (JP1)
Front Audio
SATA
Power 1
1
9
COM 2
2
10
NXP
PTN3460
1
1
Mini PCIe/mSATA
Signal Select (JP2)
Mini PCIe
PCIe x1
PS/2 Keyboard/Mouse Power Select
4
SPI Flash
BIOS
1
1
Chassis
Intrusion
Realtek
ALC888
9
USB 6-7
USB 4-5 Power 1
10 10
1
2 10
2
Select (JP5)
SATA 1/mSATA Signal
PS/2 KB/MS USB 2.0
Select (JP22) Power Select (JP6)
PS/2 KB/MS
1
S/PDIF
1
Front
Panel
Note:
SATA 0 supports SATA DOM.
SMSC
USB4604
Intel
WGI210AT
Buzzer
Dimming Mode Select
Backlight Power Select
Panel Power Select
LCD/Inverter Power Select
USB 0-1 USB 2.0
LAN 1
2
(JP17)
Digital I/O Power Select
Digital I/O 3/5/7/9 Output State
(JP18)
Digital I/O 11/13/15/17 Output State (JP20)
DVI-I
(JP8)
COM 1 RS232/422/485 Select (JP9)
(JP11)
COM 1 RS232/Power Select
(JP14)
JP6
9
COM 3
2
10
2
6
2
6
2
1
1
5
1
5
1
COM 4
9
(JP8)
SATA 1
SATA 2.0
6
2
6
5
1
5
LVDS LCD Panel
1
(JP9) (JP11) (JP14)
2
Battery
COM 1 RS232/422/485 Select
JP8
+5V (default)
1-2 On
RS232 (default)
1-2 On
+5V_standby
2-3 On
RS422 Full Duplex
3-4 On
RS485
USB Power Select: 0-1 (JP4), 3 (JP3), 4-5 (JP5), 6-7 (JP10)
5-6 On
+5V
1-2 On
COM 1 RS232/422/485 Select
JP9/JP11
+5V_standby (default)
2-3 On
RS232 (default)
1-3, 2-4 On
Clear CMOS Data
JP7
Normal (default)
1-2 On
Clear CMOS Data
2-3 On
LCD/Inverter Power Select
1-2 On
+5V
2-3 On
1-2 On
+5V
3-4 On
+3.3V (default)
5-6 On
1-2 On
+5V
2-3 On
1-3 (RI), 2-4 (DCD) On
RS232 with power
3-5 (+5V), 4-6 (+12V) On
JP17
+5V_standby (default)
1-2 On
+5V
2-3 On
Digital I/O Output State:
DIO 3/5/7/9 (JP18), DIO 11/13/15/17 (JP20)
JP16
+3.3V (default)
3-5, 4-6 On
JP14
RS232 (default)
Digital I/O Power Select
JP19
+12V
Backlight Power Select
COM 1 RS232/Power Select
JP21
+12V (default)
Panel Power Select
RS422 Full Duplex/RS485
5
+5V or +5V_standby (default)
1-2 On
GND
2-3 On
Mini PCIe/mSATA Power Select
JP1
+3.3V_standby (Mini PCIe) (default)
1-2 On
GND (default)
1-2 On
+3.3V (mSATA)
2-3 On
+5V
2-3 On
Mini PCIe/mSATA Signal Select
JP2
PCIe 1 (default)
1-4-7-10
2-5-8-11 On
mSATA
2-5-8-11
3-6-9-12 On
SATA 1/mSATA Signal Select
SATA (default)
mSATA
SATA DOM Power Select
Auto Power-on Select
1-4-7-10
2-5-8-11 On
JP13
Power-on via power button (default)
1-2 On
Power-on via AC power
2-3 On
Dimming Mode Select
JP22
JP12
JP15
PWM Mode (default)
1-2 On
Voltage Mode
2-3 On
Note:
1. SATA 0 supports SATA DOM.
2. When COM 1 RS232/422/485 is selected, JP9 and JP11 must be set in
accordance to JP8.
3. When installing one DDR3L SODIMM only, make sure to install it into the
SODIMM 1 socket.
2-5-8-11
3-6-9-12 On
6
934-KS1500-0A0G
A36612952
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising