DFI | BT101/BT103 | Quick Reference | Dfi BT101/BT103 Quick Reference

Dfi BT101/BT103 Quick Reference
Quick Reference
BT101/BT103
www.dfi.com
Board Layout (Top View)
Digital I/O
CPU Fan
(JP17) (JP20)
Standby
Power LED
ATX power (optional)
1
1
2
19
1
DC-in
1
1
1
(JP18)
System
Fan
11
12
Clear CMOS Data (JP7)
1
ASMedia
ASM1442
USB 0-1 Power
Select (JP4)
USB 3.0
BGA 1170
1
SMBus
6
5
2
1
DDR3L_1 SODIMM
DDR3L_2 SODIMM
USB 3
Intel
USB 3 Power
Select (JP3)
1
USB 6-7 Power Select
(JP10)
SATA DOM Power Select (JP12)
Auto Power-on Select
(JP13)
LPC
2
1
LAN 2
Intel
WGI210AT
3
12
12
11
9
USB 4-5
1
Line-out 2
1
3
2
1
10
9
1
1
2
10 12
1
Mini PCIe/mSATA
Power Select (JP1)
Front Audio
1
2
Mini PCIe/mSATA
Signal Select (JP2)
Mini PCIe
1
1
Chassis
Intrusion
Realtek
ALC888
9
USB 6-7
SATA
Power 0
SATA 2.0
SATA 0
1
PCIe x1
(JP8)
COM 1 RS232/422/485 Select (JP9)
(JP11)
COM 1 RS232/Power Select
(JP14)
2
1
10
10
9
1
2
1
1
1
1
(JP15)
(JP16)
(JP19)
(JP21)
1
1
(JP13)
21
State
State
State
State
1
(JP21)
(JP19)
SATA
Power 1
1
39
40
1
1
2
NXP
PTN3460
4
SPI Flash
BIOS
9
9
(JP16)
LAN2
LAN2
LAN1
LAN1
2 1
(JP12)
9
COM 2
10
COM 4
6 5
4
9
COM 1
10
COM 3
10
(JP15)
1
1
(JP10)
87
LCD/Inverter Power
1
USB 4-5 Power 1
10 10
1
2 10
2
Select (JP5)
SATA 1/mSATA Signal
PS/2 KB/MS USB 2.0
Select (JP22) Power Select (JP6)
PS/2 KB/MS
1
S/PDIF
Front
Panel
Note:
SATA 0 supports SATA DOM.
SMSC
USB4604
Intel
WGI210AT
Buzzer
Dimming Mode Select
Backlight Power Select
Panel Power Select
LCD/Inverter Power Select
USB 0-1 USB 2.0
LAN 1
2
(JP17)
Digital I/O Power Select
Digital I/O 3/5/7/9 Output State
(JP18)
Digital I/O 11/13/15/17 Output State (JP20)
DVI-I
2
6
2
6
2
1
5
1
5
1
(JP8)
SATA 1
SATA 2.0
6
2
6
5
1
5
(JP9) (JP11) (JP14)
LVDS LCD Panel
1
2
Battery
Jumper Settings
PS/2 Keyboard/Mouse Power Select
JP6
COM 1 RS232/422/485 Select
JP8
+5V (default)
1-2 On
RS232 (default)
1-2 On
+5V_standby
2-3 On
RS422 Full Duplex
3-4 On
USB Power Select: 0-1 (JP4), 3 (JP3), 4-5 (JP5), 6-7 (JP10)
RS485
5-6 On
+5V (default)
1-2 On
COM 1 RS232/422/485 Select
JP9/JP11
+5V_standby
2-3 On
RS232 (default)
1-3, 2-4 On
Clear CMOS Data
JP7
Normal (default)
1-2 On
Clear CMOS Data
2-3 On
LCD/Inverter Power Select
JP21
+12V (default)
1-2 On
+5V
2-3 On
934-BT1011-0A0G A32402949
RS422 Full Duplex/RS485
COM 1 RS232/Power Select
3-5, 4-6 On
JP14
RS232 (default)
1-3 (RI), 2-4 (DCD) On
RS232 with power
3-5 (+5V), 4-6 (+12V) On
1
Panel Power Select
JP19
Digital I/O Power Select
JP17
+12V
1-2 On
+5V_standby (default)
1-2 On
+5V
3-4 On
+5V
2-3 On
+3.3V (default)
5-6 On
Backlight Power Select
JP16
+3.3V (default)
1-2 On
+5V
2-3 On
Digital I/O Output State:
DIO 3/5/7/9 (JP18), DIO 11/13/15/17 (JP20)
+5V or +5V_standby (default)
1-2 On
GND
2-3 On
SATA DOM Power Select
Mini PCIe/mSATA Power Select
JP1
+3.3V_standby (Mini PCIe) (default)
1-2 On
+3.3V (mSATA)
2-3 On
Mini PCIe/mSATA Signal Select
JP2
PCIe 1 (default)
1-4-7-10
2-5-8-11 On
mSATA
2-5-8-11
3-6-9-12 On
SATA 1/mSATA Signal Select
JP22
SATA (default)
1-4-7-10
2-5-8-11 On
mSATA
2-5-8-11
3-6-9-12 On
JP12
GND (default)
1-2 On
+5V
2-3 On
Auto Power-on Select
JP13
Power-on via power button (default)
1-2 On
Power-on via AC power
2-3 On
Dimming Mode Select
JP15
PWM Mode (default)
1-2 On
Voltage Mode
2-3 On
Note:
1. SATA 0 supports SATA DOM.
2. BT101: 12V DC-in jack (default) or 4-pin power connector (optional).
3. BT103: 19~24V DC-in jack (default) or 4-pin power connector (optional).
4. When COM 1 RS232/422/485 is selected, JP9 and JP11 must be set in
accordance to JP8.
5. When installing one DDR3L SODIMM only, make sure to install it into the
SODIMM 1 socket.
Battery Usage
The lithium ion battery powers the real-time clock and CMOS memory. It is an auxiliary source of power when the main power is shut
off.
Safety Measures
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by the
manufacturer.
• Dispose of used batteries according to local ordinance.
DFI reserves the right to change the specifications at any time prior to the
product's release. This QR may be based on editions that do not resemble your
actual products. For more documentation and drivers, please visit the download
page at go.dfi.com/BT101_BT103, or via the QR code to the right.
Quick Reference | BT101/BT103
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising