DFI | CD905-B Series | Quick Reference | Dfi CD905-B series Quick Reference

Dfi CD905-B series Quick Reference
5
4
1
Intel Atom
ON
CD905-B
(SW1)
D2550/ N2800/
N2600
DDR3 SODIMM
Intel
NM10
iTE
IT8518E
1
XIO3130
CPU Fan
Chrontel
CH7511B
JMB
368
D110
D1
COM Express connector
C110
LVDS Resolution Select (JP18)
1
B1
COM Express connector
Standby power LED
5
SPI Flash BIOS
A1
BOTTOM
LCD Brightness Conrol (via hardware)
JP18
Backlight on or off
1-2 On
Decreases the voltage level
3-4 On
Increases the voltage level
5-6 On
LVDS Panel Select
6
A110
TOP
Channel
SW1
1-4 On
800x600
6/18 bit
Single
1024x768
6/18 bit
Single
2-4 On, 1 Off
1024x768
8/24 bit
Single
1,3,4 On, 2 Off
1280X768
6/18 bit
Single
3-4 On, 1-2 Off
1280X800
6/18 bit
Single
1,2,4 On, 3 Off
1280X960
6/18 bit
Single
2,4 On, 1,3 Off
1280X1024
8/24 bit
Dual
1,4 On, 2,3 Off
1366X768
6/18 bit
Single
4 On, 1-3 Off
1366X768
8/24 bit
Single
1-3 On, 4 Off
1440X900
8/24 bit
Dual
2-3 On, 1,4 Off
1400X1050
8/24 bit
Dual
1,3 On, 2,4 Off
1600X900
8/24 bit
Dual
3 On, 1,2,4 Off
1680X1050
8/24 bit
Dual
1-2 On, 3-4 Off
1600X1200
8/24 bit
Dual
2 On, 1,3,4 Off
1920X1080
8/24 bit
Dual
1 On, 2-4 Off
1920X1200
8/24 bit
Dual
1-4 Off
www.dfi.com
C1
B110
2
Note:
1. Increasing or decreasing the voltage to control
the LCD panel’s brightness varies among Inverters.
You must refer to the Inverter’s specification to make
the appropriate adjustment to the brightness of the
LCD panel.
2. In LVDS panel select, the default setting is eDP.
- 1366x768: N2000 series processor supports eDP only.
- 1600x1200: N2000 series processor supports DP only.
- 1920x1080: D2000 series processor supports eDP only.
- 1920x1200: D2000 series processor supports DP only.
934-CD9051-000G
A22212333
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising