DFI | G5C100-NR | Quick Reference | Dfi G5C100-NR Quick Reference

Dfi G5C100-NR Quick Reference
G5C100-NR
Power-on Select
JP9
1-2 On
Power-on via AC power
Power-on via power button 2-3 On
COM 2 RS232/AUX
Select
RS232
Auxiliary power
USB Power: 1-4 (JP6), 5-8 (JP5)
5V (default)
1-2 On
5V_standby
2-3 On
JP10
1-3, 2-4 On
3-5 (5V), 4-6 (12V) On
COM 4 RS232/RS485/
JP11
AUX Select
RS232
1-3, 2-4, 7-9, 8-10 On
RS485
3-5, 4-6, 7-9, 8-10 On
Auxiliary power
1-3, 2-4, 9-11 (12V), 10-12 (5V) On
LCD/Inverter Settings - JP7
Panel Power
Inverter On Level Inverter On/Off Select
1-3
On
2-4 On Active Low 8-10 On
5V
5V
4-6 On Active High 10-12 On
3.3V 3-5 On
12V
7-9 On
12V
Note: Before powering-on the system, make sure JP7’s setting
matches the LCD panel’s specification. Selecting the incorrect
voltage will seriously damage the LCD panel.
PS/2 Power
5V (default)
5V_standby
JP8
1-2 On
2-3 On
LCD Brightness Control
(Voltage Level Adjust)
J7
Increases the voltage level
1-2 On
Decreases the voltage level
2-3 On
Note: Increasing or decreasing the
voltage to control the LCD panel’s
brightness varies among Inverters. You
must refer to the Inverter’s specification
to make the appropriate adjustment to
the brightness of the LCD panel.
Intel Core Duo/Solo,
JP1
Core2 Duo FSB
2-3
Auto (default)
2-3
533MHz FSB
JP2
JP3
1-2
2-3
2-3
2-3
JP4
Clear CMOS Data
1-2
On
Normal (default)
Clear CMOS Data 2-3 On
934-G5C104-500G
A94921743
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising