DFI | SR100-N | Quick Reference | Dfi SR100-N Quick Reference

Dfi SR100-N Quick Reference
SR100-N
JP14
Power-on Select
Power-on via power button (default) 1-2 On
Power-on via AC power
2-3 On
USB Power: 0-3 (JP4), 4-7 (JP2)
5V (default)
1-2 On
5V_standby
2-3 On
COM 1 RS232/AUX
COM 2 RS232/AUX
JP11
JP13
RS232
RS232
1-3, 2-4 On (default)
1-3, 2-4 On (default)
Auxiliary power 3-5 (5V), 4-6 (12V) On
Auxiliary power 3-5 (5V), 4-6 (12V) On
Clear CMOS Data
Normal (default)
Clear CMOS Data
JP1
1-2 On
2-3 On
PS/2 Power
5V (default)
5V_standby
LCD/Inverter Settings - JP3
Panel Power
Inverter On Level Inverter On/Off Select
1-3 On
2-4 On Active Low 8-10 On
5V
5V
4-6 On Active High 10-12 On
3.3V 3-5 On
12V
7-9 On
12V
Note: Before powering-on the system, make sure JP3’s setting
matches the LCD panel’s specification. Selecting the incorrect
voltage will seriously damage the LCD panel.
JP6
1-2 On
2-3 On
LCD Brightness Control
(Voltage Level Adjust)
J7
Increases the voltage level
1-2 On
Decreases the voltage level
2-3 On
Note: Increasing or decreasing the
voltage to control the LCD panel’s
brightness varies among Inverters. You
must refer to the Inverter’s specification
to make the appropriate adjustment to
the brightness of the LCD panel.
934-SR1002-000G
A02611748
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising