Sena | 10C | Quick Start Guide | Sena 10C Quick Start Guide

Sena 10C Quick Start Guide
PREPARATION
BASIC OPERATION
Knowing the Headset Layout
Installing the Headset
PAIRING
Operating the Buttons
Speaker
Checking the Battery Level
Pairing with Mobile Devices - Phone, Music
Making Calls
Using the Phone Keypad
Using Phone Features
After Pairing…
1
Clamp Unit
Antenna
Camera Button
1
2
Lens
Blinking
5
2
Tap the
button
Microphone
Jog Dial
1
Status LED
Double tap the
button
Press and hold
the button for
5 seconds
Press the two
buttons at the
same time
Rotate the
Jog Dial
2
You will hear
ascending beeps.
“Hello”
1
OFF
3
You will hear
descending beeps.
“Good bye”
Headset
Micro HDMI
Cable Port
Simultaneously press and hold the Jog Dial and the Phone Button
for 1 second to turn on or off the headset.
Phone Button
MicroSD
Card Slot
Charging LED
Blinking
0~30%
You will hear multiple beeps.
or
or
“Hello”
“Phone pairing”
Using the Speed Dial
“High”
70~100%
“Medium”
30~70%
“Low”
0~30%
Or, press and hold the Jog Dial and the Phone Button for 3 more
seconds when the headset turns on. You will hear a triple beep
and a voice prompt.
Ending Calls
or
Bluetooth
until you hear a beep
Bluetooth
You will hear a beep.
Sena10C
“Speed dial”
Charging the Battery
“Your headset is paired”
Charging
Fully charged
Transferring Calls
between a mobile phone and the
headset
Rejecting Calls
Adjusting the Volume
or
1
2
Voice Menu
• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel
Listening to Music
After Pairing…
Playing or Pausing Music
Speaker and
Microphone Port
DC Power Charging &
Firmware Upgrade Port
30~70%
3
ON
1
Blinking
Answering Calls
Blinking
Turn on the headset and check the battery level via the Status
LED.
Turning On/Off the Headset
2
70~100%
Using the Voice Dialer
You will hear a beep when the volume
reaches the maximum or minimum
level.
until you hear
a beep
Tracking Forward or Backward
until you hear
a beep
until you hear
a double beep
AC adapter
1
Rotate While
Pressing
INTERCOM
CAMERA
Pairing with Other Headsets
Turning On/Off the Camera
Headset A
Headset B
Tagging Videos
To Enter Video Tagging Mode
ON
OFF
3
To Start Video Tagging
1
RADIO
SETTING
TROUBLESHOOTING
Turning On/Off the FM Radio
Method1) Using the headset
Factory Reset
Headset Settings
To Exit Video Tagging Mode
3
2
Camera Settings
8
You will hear a double beep sound.
If you want to restore the 10C to factory default settings, press and hold
the Phone Button for 10 seconds. Tap the Jog Dial. The headset
automatically restores the default settings and turns off.
“FM on” or “FM off”
Fault Reset
“Intercom pairing”
Seeking Stations
“Video tagging ready”
Recording Videos
1
“Video tagging off”
OFF
“Recording stopped”
Rotate While Pressing
Saving or Deleting Stations
Taking Photos
To Save
To Delete
2
You can start or end a two-way intercom
conversation with each headset.
Quick Start Guide
Motorcycle Bluetooth® Camera &
Communication System
For details about downloading the Sena Device Manager, refer to the
leaflet included in the package.
After Pairing…
3
“Camera setup”
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to configure the headset
settings.
“Recording”
Using the Intercom
1
“Configuration menu”
If the 10C is not working properly for any
reason, push the pin-hole reset button
located on the back of the headset.
Method2) Using the Sena Device Manager
“Tagging complete”
ON
Follow the steps above to pair with two or more headsets.
“Video tagging”
Listening to Preset
Stations
Method3) Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android
or iPhone from Google Play or App Store.
Refer to www.sena.com for more details.
2. Pair your smartphone with the headset.
You will hear a shutter sound.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to configure the headset settings.
2
“Preset (#)”
“(#)”
“Save preset
(#)”
“Delete preset
(#)”
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
You can download the full version of the manual and view other
Sena products at the Sena website: www.sena.com.
18.Oct
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising