Sena | POWERPRO MOUNT | Quick Start Guide | Sena POWERPRO MOUNT Quick Start Guide

Sena POWERPRO MOUNT Quick Start Guide
Sena PowerPro Mount
Quick Start Guide
Installation
Release
2
1
Holder
1
2
1
2
3
4
LED Indicator
Power Button
Charging
USB Port
(Output)
5
6
Micro USB Port
(Input)
[PowerPro Mount]
6.5 hrs*
100%
75%
50%
25%
0%
7
Note:
* It takes 6.5 hours to fully charge the PowerPro
Mount when using standard USB cable.
2
1
[Handlebar Mount]
1
[USB Power Cable]
17.Dec
2
3
• Do not clean the product with cleaning solvents, toxic
chemicals, or strong detergents as this may damage
the product.
• Do not drop or otherwise shock the product. It may
damage the product or its internal electronic circuits.
• Do not disassemble, repair or modify the product
as this may damage the product and invalidate the
product warranty.
• Do not store the product in humid environments,
especially for long time storage.
Using the PowerPro Mount
100%
75%
50%
25%
2
1
1
Product Use
• Do not cause impact to the product or touch it with
sharp tools as this may damage the product.
• Do not use the product in high-temperatures or apply
heat to the product as this may cause damage,
explosion, or fire.
• Keep the product dry and away from water. It may
damage the product.
• Keep product away from pets or small children. It may
damage the product or cause accidents.
• Do not use the product near a microwave oven as
this may cause malfunction or interference with the
product.
• Do not use the product near hazardous explosives.
When there are near any explosion hazards, unplug
the USB cable and heed any regulations, instructions,
and signs in the area.
• If the product is damaged, stop using it immediately. It
may cause damage, explosion, or fire.
Note:
• To begin charging, press the Power Button after
you connect the USB power cable.
• To find out the battery level during use, tap the
Power Button. The LED indicator will light up to
show the Remaining battery level.
• Sena PowerPro Mount is compatible with 5V input
USB-charged devices only.
Safety Information
Product Storage and Management
• Keep the product free of dust. It may damage
mechanical and electronic parts of the product.
• Do not store the product in high temperatures as
this may reduce the life span of electronic devices,
damage the battery, and/or melt plastic parts of the
product.
• Do not store the product in cold temperatures. Abrupt
changes in temperatures may cause condensation
and damage electronic circuits.
4
Battery
Therefore, when using the product, make sure to adhere
to the following:
• The battery performance may be reduced over time
with usage.
5
• In recharging the battery, make sure to use an
approved charger provided by the manufacturer. Use
of a non-approved charger may cause fire, explosion,
leakage, and other hazards may also reduce the life
time or performance of the battery.
• Store the battery at temperatures of 15°C~25°C
(59°F~77°F). Higher or lower temperatures may
reduce the capacity and life of the battery, or may
cause temporary non-operation. Do not use the
product in sub-zero temperature, because it may
cause serious reduction of the battery performance.
• If you apply heat to the battery or throw it into fire, it
may explode.
• Never use a damaged charger. It may explode and/or
cause accidents.
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
Rating: 3.63V / 10000mAh
Charging voltage: 5V
Charging current: 2A
End voltage: 5V
Discharging current: 2000mA
Battery Capacity: 10000mAh
Input: 5V / 2A
Output: 5V / 2A
Operating temperature: 10 °C ~ 45 °C
Weight: 249 g
Size: 80.8 mm x 122 mm x 62.7 mm
Charging time: 6.5 hours (given 2A adapter)
Safety: Overcharging protection, over-discharging
protection, temperature protection
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: support@sena.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising