Sena | TUFFTALK LITE | Quick Start Guide | Sena TUFFTALK LITE Quick Start Guide

Sena TUFFTALK LITE Quick Start Guide
PREPARATION
BASIC OPERATION
Knowing the Headset Layout
Installing the Headset
PAIRING
Operating the Buttons
Checking the Battery Level
Pairing with Mobile Devices - Phone, Music
Using Phone Features
Using the Speed Dial
After Pairing…
OR
DC Power
Charging &
Firmware
Upgrade Port
Tap the
button
Double tap the
button
Press and hold
the button for
5 seconds
Press the two
buttons at the
same time
Press one
of the two
buttons
ON
OFF
1
(+) Button
Blinking
30~70%
Blinking
0~30%
Answering Calls
or
“Hello”
You will hear ascending
beeps.
(-) Button
Replacing the Ear Pads of the Tufftalk Lite
Center
Button
You will hear descending
beeps.
“Goodbye”
Simultaneously press and hold the Center Button and the
(+) Button for 1 second to turn on or off the headset.
“High”
70~100%
“Medium”
30~70%
“Low”
0~30%
“Speed dial”
Ending Calls
Rejecting Calls
“Phone pairing”
After Pairing…
Playing or Pausing Music
Charging the Battery
Making Calls
Using the Phone Keypad
Charging
Fully charged
OR
1
or
AC adapter
Tracking Forward or Backward
until you hear
a double beep
Bluetooth
Sena Tufftalk Lite
OR
Using the Voice Dialer
Bluetooth
You will hear a beep when the volume
reaches the maximum or minimum
level.
Voice Menu
• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel
Listening to Music
Or, press and hold the Center Button and the (+) Button for
3 seconds when the headset turns on. You will hear a voice prompt.
Adjusting the Volume
Use your fingers to remove the ear pads and insert the included ear pads.
OR
You will hear a beep.
“Hello”
Microphone
Status LED
70~100%
Turn on the headset and check the battery level via the Status LED.
Turning On/Off the Headset
Right Ear Cup
Blinking
“Your headset is paired”
1
Press the
(+) Button or the
(-) Button for
1 second
INTERCOM
RADIO
Pairing with Other Headsets
Using the Intercom
Turning On/Off the FM Radio
Listening to Preset Stations
SETTING
TROUBLESHOOTING
Method1) Using the headset
Factory Reset
After Pairing…
1
Headset A
Headset B
You will hear a double beep sound.
“FM on” or “FM off”
“Configuration menu”
Fault Reset
1
2
Method2) Using the Sena Device Manager
Seeking Stations
3
5
You will hear a double beep sound.
If you want to restore the Tufftalk Lite to factory default settings, use the
Factory Reset in the configuration menu. The headset automatically
restores the default settings and turns off.
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to configure the headset
settings. For more information on downloading the Sena Device Manager,
please visit sena.com.
1
5
If the Tufftalk Lite is not working properly for any
reason, push the pin-hole reset button located below
the Center Button.
“Intercom pairing”
Using the Group Intercom
To Start
To Save
Follow the steps above to pair with two or more headsets.
“Group intercom”
OR
“Group intercom terminated”
Method3) Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android
or iPhone from Google Play or App Store.
Refer to www.sena.com/headset-app/ for more details.
OR
To End
Double tap the (+) Button or the (-) Button
To Delete
Quick Start Guide
Industrial Bluetooth®
Communication System
Saving or Deleting Stations
You can start or end a two-way intercom conversation with each
headset.
Hard Hat Mount Earmuff
“Preset (#)”
“(#)”
2. Pair your smartphone with the headset.
“Save preset
(#)”
“Delete preset
(#)”
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Settings to configure the headset settings.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: support@sena.com
MP0501610_1.0_EN_March2018
You can download the full version of the manual and view other
Sena products at the Sena website: www.sena.com.
18.Mar
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising