RocketFish | RF-G1603 | RF-G1603-C | Quick Setup Guide | RocketFish RF-G1603 | RF-G1603-C 2-Output HDMI Splitter Quick setup guide

RocketFish RF-G1603 | RF-G1603-C 2-Output HDMI Splitter  Quick setup guide
Final flat size: 15 x 7 in (381 mm × 177.8 mm)
Final fold size: 5 x 3.5 in (127 mm × 88.9 mm)
RF-G1603_-C_19-0021_QSG_V2_EN.ai 1 1/21/2019 11:35:07 AM
QUICK SETUP GUIDE
RF-G1603 / RF-G1603-C, 4K HDMI Splitter
PACKAGE CONTENTS
FEATURES
SETTING UP YOUR HDMI SPLITTER
• HDMI splitter
• AC power adapter
• Quick Setup Guide
•
•
•
•
1 Connect one end of a high-speed HDMI cable (not included) to your video source and the
other end to the INPUT port on the HDMI splitter.
You will need:
• High-speed HDMI cables, such as
Rocketfish, available in multiple
lengths.
Note: Using this product with 4K video
will require the use of 18 Gbps
bandwidth cables for best performance.
Supports 3D video
Supports up to 4K UHD
Supports 18 Gbps bandwidth
Compatible with most TV’s, projectors and
video displays with HDMI inputs.
• Gold-plated connectors for maximum signal
transfer and corrosion resistance
• Supports HDMI CEC commands for remote
control functionality
• Wall-mountable with integrated key-hole
slots (hardware not included).
HDMI SPLITTER BASICS
This Rocketfish two-way HDMI splitter will send HDMI audio and video signals from a single
source, such as a Blu-ray/DVD player or cable/satellite box, to two destinations, such as a TV
and an AV receiver. It is ideal for sending the audio signal from a 4K source to an AV receiver
(one that does not support 4K video pass-through), and video signal to a 4K UHD TV.
Front
SPECIFICATIONS
Game console
OR
Blu-ray player
HDMI
OUTPUT1
Micro USB
HDMI
INPUT
2 Connect one end of another high-speed HDMI cable to your HDMI splitter’s OUTPUT1
port, then connect the other end of the HDMI cable to the IN port of a destination
component, such as an AV receiver, projector, or HDTV.
3 Connect one end of another high-speed HDMI cable to your HDMI splitter’s OUTPUT2
port, then connect the other end of the HDMI cable to the IN port of another destination
component, such as an AV receiver, projector, or HDTV.
4 Connect the included AC adapter to the Micro USB jack on the HDMI splitter and a
standard 120V AC outlet. The LED indicator lights white. Turn on all connected devices and
operate. It is not necessary to unplug the unit. You can leave it plugged in.
Power LED
HDMI OUT 1
HDMI IN
HDMI OUT 2
Projector
OR
AV receiver
Micro USB
5V/1A
Game console
Blu-ray player
OUTPUT1
INPUT
OUTPUT2
HD TV
Before using your new product, please read these instructions to prevent any damage.
OR
Cable/satellite
box
Micro USB
HDMI
HDMI
OUTPUT1
INPUT
HDMI
OUTPUT2
2.0b
Video signal bandwidth
18 Gbps
Resolutions supported
480i to 2160p (4K UHD) / 60Hz from source device
HDMI HDCP
Compliant with HDCP 2.2
Power
5 VDC / 1000 mA (5 W max) Micro USB
Dimensions
3.94 × 3.41 × 1.06 in. (100 × 87 × 27 mm)
TROUBLESHOOTING
OUTPUT2
Connecting one component to a display and AV receiver or projector
Back
HDMI version
Symptom
Possible solution
Power LED is not on Make sure that the HDMI splitter’s power adapter is plugged in.
Video has
interference
• Make sure that you are using high-speed HDMI cables for all
connections.
• Make sure that the TV’s video resolution supports the video
source’s output resolution.
No video and/or
audio
• Make sure that the audio and video formats of the content
being used (such as Blu-ray disc) are supported by all
connected devices.
• Make sure that your destination components (such as TV and
AV receiver) are set to the correct HDMI inputs.
• Make sure that you are using High-Speed HDMI cables for all
connections.
• Very long length of cables (over 20') may cause a loss of video
signal or downgrade to lower resolution. Use a shorter cable, if
possible.
• Unplug the HDMI splitter’s AC power adapter, then plug it back
in again.
RF-G1603_-C_19-0021_QSG_V2_EN.ai 2 1/21/2019 11:35:07 AM
LEGAL NOTICES
TROUBLESHOOTING
Symptom
Possible solution
Symptom
Possible solution
(continued)
No video and/or
audio
If you still have issues, do the following:
• Make sure cable connections are tight.
• Try turning on your components in a different order. When you
find one that works, continue to use this sequence.
• Try a different input source, then switch back to HDMI.
• Make sure that the video resolution output of the source device
is compatible with your TV or video projector.
• Bypass the home theater receiver by connecting the HDMI
source directly to the TV.
• Make sure your components firmware is up to date.
HDR issues
(4K UHD TVs)
Check for a confirmation indicator in the top left or right corner of
the screen. If you do not see this, or you see a message stating
that either you need to connect the HDR source to an
HDR-compatible TV or the incoming signal has been downgraded
to 1080p due to the lack of proper HDR detection, check the
following:
• Use High-Speed HDMI cables (18 Gbps speed recommended).
• Make sure that all components involved are HDR compatible.
• Go into your source component's video resolution output
settings and, if necessary, change the resolution output setting
to 4K (sometimes labeled 4K/2K) and see if that corrects the
problem.
• Make sure your TV/Video Projector’s firmware is up to date.
• If none of the above work, contact tech support for your
TV/video projector.
Device powers
on/off or switches
input unexpectedly
• This device passes CEC* commands sent by your components. If
you don’t want it to do this, it can be disabled in the device’s
menu. See the user guide or contact the manufacturer for more
information.
Problems
connecting your
PC/Laptop to a TV
• Make sure that HDMI is the default output connection in your
PC/Laptop settings.
• Start your PC/Laptop with the HDMI cable connected to a TV
that is on.
• Start the PC/Laptop while the TV is off, then turn on the TV.
• Try turning on both the PC/Laptop and the TV, then connecting
them with an HDMI cable.
Video resolution
showing as 1080p,
even when 4K
signal selected
In some cases, HDCP 2.2 protection will have compatibility errors
when using a splitter. The splitter will request a 1080p signal from
the source component to allow a picture to be displayed.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ONE-YEAR LIMITED WARRANTY
Visit www.rocketfishproducts.com for details.
CONTACT ROCKETFISH:
For customer service call 1-800-620-2790
www.rocketfishproducts.com
ROCKETFISH is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China
*CEC (Consumer Electronics Control) is a feature of HDMI designed to allow users to command and control multiple
devices connected via HDMI using a single remote control. CEC also lets individual CEC-enabled devices command
and control each other without user input.
V2 ENGLISH 19-0021
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising