Shure | UA505 | User guide | Shure UA505 Remote Antenna Mounting Bracket Kit User guide

Shure UA505 Remote Antenna Mounting Bracket Kit User guide
UA505 -- Remote Antenna Mounting Bracket Kit
General Description
The Shure UA505 Remote Antenna Mounting Bracket Kit lets you mount a 1/2-wave antenna away from the receiver or equipment rack. This kit includes one mounting bracket, a bulkhead adapter, and bulkhead adapter nut.
NOTE: Antennas and bracket mounting hardware (screws, washers and nuts) are not included in this kit.
Wall bracket dimensions: 4.662" L X 1.25" W X1.662" H
Antenna Placement
•
•
•
•
•
•
Place antennas as high as possible and away from metal obstructions.
Placing the antenna behind non-metallic curtains or stage flats is acceptable.
Keep antennas separated by at least one wave length.
Make sure the person using the transmitter can see the receiver antenna at all the times.
Use RG-8U or equivalent 50 Ω low-loss cable such as a Shure UA825 or UA850.
Do not use 1/4-wave antennas for remote mounting.
Wall Mount
1/2
Shure Incorporated
Microphone Stand Mount
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising