Shure | UA600 | User guide | Shure UA600 Antenna Rack Mount Kit User guide

Shure UA600 Antenna Rack Mount Kit User guide
UA600
Antenna Rack Mount Kit
UA600 Antenna Rack Mount Kit
The Shure Model UA600 Antenna Rack Mount Kit allows antennas to be installed on the front of a rack-mounted Shure wireless receiver. Each kit includes the
following:
(2) Bulkhead adapters
95A8994
(2) 1/2” internal-tooth lockwashers
95X8631
(2) 1/2-28 hex nuts
95W8631
(2) RG-58/U antenna cables
UA802
Hex Nut
Lockwasher
Antenna Cable
Antenna
(not
included)
Bulkhead Adapter
Bulkhead Plug
(remove)
Installation
1. Remove the bulkhead plugs from the front panel.
2. Install the bulkhead adapters as shown.
3. Remove the antennas from the back of the unit and reconnect them to
the bulkhead adapters on the front.
4. Use the supplied cables to connect the antenna inputs on the back panel
of the receiver to the bulkhead adapters.
©2017 Shure Incorporated
1/1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising