Shure | WA653 | User guide | Shure WA653 Microphone Flag Extender User guide

Shure WA653 Microphone Flag Extender User guide
Microphone Flag Extender
WA653 Microphone Flag Extender
The Shure WA653 Microphone Flag Extender extends the length of Axient
and UHFR wireless handheld transmitters to fit various microphone flags (not
included). Customize transmitter length with an extender to fit your microphone
flag. Package includes two different lengths:
1 inch microphone flag extender
1.5 inch microphone flag extender
1. Remove protective ring from top of extender.
2. Thread microphone cartridge into extender.
3. Thread extender into microphone body.
Note: Only extend transmitter maximum of 2.5 inches. Extending more
than 2.5 inches can damage transmitter if dropped.
4. Insert microphone flag from bottom of microphone body.
Warning: Do not insert microphone flag over the cartridge side of the extender. This may damage electrical connections in the extender.
1 inch extender
31.8 x 37.1 mm (1.25 x 1.5
in) (L x Dia.)
1.5 inch extender
44.5 x 37.1 mm (1.75 x 1.5
in) (L x Dia.)
1 inch extender
43.5 g (1.5 oz)
1.5 inch extender
65.5 g (2.3 oz)
Meets essential requirements of the following European Directives:
WEEE Directive 2002/96/EC, as amended by 2008/34/EC
RoHS Directive 2011/65/EU
Note: Please follow your regional recycling scheme for batteries and
electronic waste
©2017 Shure Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF