Shure SystemOn Audio Asset Management Software User guide

Shure SystemOn Audio Asset Management Software User guide
Audio Asset Management Software
Shure online user guide for SystemOn.
Version: 4 (2019-F)
Shure Incorporated
Table of Contents
Adding Devices to the Location
SystemOnAudio Asset Management Software
User Accounts and Roles
Add a User Account
General Description
Roles and Access Levels
Installation Examples
Getting started
Accessing Your SystemOn Site
Menu Navigation
Homepage system dashboard
Monitor microphones, channels, and devices
Not Seeing Anything on the Homepage?
Purchasing a License Plan
License Management
Apply Your License Plan
Assign a License to Each Device
Checking License Status
Connecting to the Device Network
Accessing Devices on the Network
Adding Devices From Subnets
Organizing Devices by Locations
Creating a New Location
Location Subscriptions
Assign Subscriptions
Notifications and Alerts
Integrating SystemOn with your Network Services
Connecting to the SMTP Server
Set Up SMS Text Message Notifications
Monitoring Hardware and Making Adjustments
Battery Management
Keeping Track of Devices
Working With Locations
Adjusting Microphone Gain and Mute
Linking MXW Microphones
Device Properties
System Maintenance and Troubleshooting
Event Log
Supported Devices and Firmware
Backup and Restore the Database
More Troubleshooting Help
Shure Incorporated
Audio Asset Management Software
General Description
Shure SystemOn software enhances large installations of existing Shure audio systems, helping technical support teams man­
age devices across buildings and campuses. The software monitors Shure devices across networks, logging system events
and alerting users over text or email for time-sensitive and critical issues. An intuitive web browser interface allows technicians
and help desk specialists to locate and troubleshoot devices, adjust audio levels and muting, and monitor wireless microphone
stability from a remote location.
Centralized Support Tool
Manage the health of Shure devices for your entire organization, even across subnets
Troubleshoot audio and connection issues from a remote location using monitoring tools and event logs
Avoid high setup costs with an out-of-the-box software solution that requires no external programming
Seamlessly integrate new features for existing Shure devices using SystemOn
Shure Incorporated
Secure User Accounts
• Proactively manage the network by receiving alerts via e­mail and SMS text messages for low batteries and offline de­
• Minimize risk and simplify workflow by limiting each user's access based on role and function
• Sync existing usernames and passwords by integrating with LDAP
• Work across multiple languages by selecting the language for each account
Remote Control
• Instant remote assistance: audio muting, device identification, gain adjustment, and hardware lockout
• Remote linking ties MXW transmitters to systems on different subnets to streamline help desk support
• Link backup MXW transmitters to provide mic options to presenters or to prepare for long meetings with charged replace­
Installation Examples
Shure Incorporated
Getting started
Accessing Your SystemOn Site
Shure SystemOn software provides secure access to your Shure devices from anywhere and at any time. Simply access your
site using a web browser on a mobile device or computer.
Shure Incorporated
Note: The site URL can be customized by your system administrator.
Menu Navigation
Use the navigation bar to get around the application.
Access other pages of the software. Certain menu items may not be available to you de­
pending on your role and access levels.
My Account
All devices
Event log
SystemOn provides notifications to stay ahead of important device and system issues.
Shure Incorporated
Access help content to improve your SystemOn experience.
Homepage system dashboard
The SystemOn homepage provides a dashboard of critical and time­sensitive events related to your subscriptions. The dash­
board identifies the devices that need attention and provides details for troubleshooting the issue, such as device name, model
type, and the location.
Displays high-level status indication of your inventories, includes alerts on important device
Inventory summary
Lowest Batteries
• Low batteries: Microphones that fall below the threshold set for receiving low battery
• Missing devices: Microphones that go out of range and devices that are powered
down or disconnected from the network.
Monitors all microphones on air in your locations and displays the lowest battery levels first
so you can prioritize and quickly resolve battery issues.
Monitor microphones, channels, and devices
Adjust device and channel settings, prepare a new microphone, and monitor audio and battery levels from the Monitoring tab in
each location. You can access any device from the locations you are subscribed to.
Shure Incorporated
Open a location from your home dashboard.
Not Seeing Anything on the Homepage?
If you have trouble viewing or accessing devices, additional settings may need to be configured in SystemOn.
Shure Incorporated
Contact your system administrator to ensure that the following items are completed:
• Licenses: Check that the license plan is up to date (Settings > Licenses) and that each device on the network is as­
signed a license.
• Subscriptions and notifications: Your user account must be subscribed to locations in order to keep track of those de­
vices. Additionally, make sure notifications are set up to receive alerts to your email and phone.
Shure provides a free 30-day trial license to test and evaluate SystemOn. During this period, all features and tools are fully
functional. To continue using the software after 30 days, purchase a license plan and use Settings > Licenses to apply
your licenses.
Purchasing a License Plan
To start a trial or purchase a license plan, contact your local Shure sales representative or distributor.
Cover your Network Devices with a License Plan
Purchase a license plan for the total number of IP-networked devices you want to manage, such as receivers and chargers. A
license enables all features for that device and any wireless components that communicate to it, such as wireless micro­
License example for a higher education application
In this example, a university has 52 Shure network audio devices installed across the campus. To manage all of these
devices at the same time, a license plan of at least 52 devices is required.
License Management
Use the license page to apply license plans, assign licenses to devices, and keep a history of purchases. Go to Settings >
Shure Incorporated
Viewing your License Plans
Apply your license plan before assigning licenses to devices.
Auto Assign
Assign licenses to all of your IP-addressable network devices at once. You must have an
equal or greater amount of available licenses than devices.
Offline Application
Apply your license on a server without internet access. Follow the prompts in the software to
upload the capability response file received from the Shure software portal
Shure product name.
Identifies whether the license is valid or invalid for the product.
# of licenses
Number of total licenses in your plan used to cover your devices.
# of assigned
The number of licenses currently assigned to devices.
Start and Expiration dates
The duration of your plan, beginning from the date your purchase was processed.
Entitlement ID
Your purchase identification number.
Apply Your License Plan
Apply your license plan before assigning a license to each device.
1. Find the license in the emailed order receipt.
Activation ID: a61c-29f4-df27-4af7-b1df-65d5-1856-9fc5
SKU: SystemOn
Purchase Order:
Product Name: SystemOn_Product
IP Addressable Devices: 250
Quantity: 1
Start Date: Jun 23, 2018
Expiration Date: Jun 25, 2018
Shure Incorporated
2. Go to Settings > Licenses in the application.
3. Select Apply and enter your ID.
4. Submit the ID and the product displays in a new row in the licenses table.
If the server is not connected to the internet, see Offline License Application to finalize the process.
Apply your License without an Internet Connection
For servers that do not have connection to the internet, follow these steps to activate your license:
Offline License Application
Shure Incorporated
The Offline activation file is unique to your software account and license purchases.
1. On a computer connected to your server, open SystemOn and go to Settings >
1. Export your ID file (Of­
fline activation)
2. Sign in with your Activation ID or username.
3. Select Apply and submit your Activation ID.
Tip: Find the Activation ID in your order receipt email.
4. Download the Offline activation file to your computer.
2. Submit to
1. Go to the Shure software portal at
2. Upload your Offline activation file.
3. Save the confirmation file to your computer.
3. Return the Confirmation
to SystemOn
1. Open the License page in SystemOn.
2. Select Offline activation and upload the capability response file from the Shure soft­
ware website.
Assign a License to Each Device
Assign a license to each device that you want to manage. An active license enables all features for that IP-networked device
and any wireless components that communicate with it, such as wireless microphones.
You can reassign it to another device at any time during the license plan.
Automatically Assign Licenses in Bulk
If your plan has enough licenses to cover all of your devices, you can automatically assign them in bulk.
1. Go to Settings > Licenses.
2. Select Auto assign. The window displays license information:
◦ Number of available licenses
◦ Number of discovered devices
Shure Incorporated
3. Select Yes to assign licenses to all of your devices. The license table updates with the new total number of assigned li­
Individually Assign Licenses
Assign licenses to a single device or several at once:
1. Go to All devices > Devices.
2. Select the device or devices that you want to license.
3. Select Assign licenses from the
(More) menu.
4. Verify the license status for this device.
Shure Incorporated
Remove a License From a Device
At any time, you can remove a license assigned to a device. The license is then available to assign to another device in your
1. Go to All devices > Devices.
2. Select the licensed device or multiple devices.
3. Select Remove licenses from the
(More) menu.
4. The devices display as Unlicensed.
Checking License Status
When a device is unlicensed, key tools are unavailable, such as monitoring, audio mute, and gain adjustment. The device dis­
plays in the list, but cannot be used in the Monitoring tab:
Shure Incorporated
Unlicensed Device
To take advantage of SystemOn features, ensure that each networked device is licensed.
Open one of your locations to the Devices tab or go to All devices > Devices to view
status of each device.
Individual Devices
Go to Settings > Licenses to see a snapshot of your license plan and the number of
available licenses from the Licenses page.
Shure Incorporated
Connecting to the Device Network
Connect the SystemOn server to your audio network by selecting the correct network interface card (NIC). If more than one
NIC is available on your machine, choose the card with an IP address in the same range as your devices.
Select the NIC
Accessing Devices on the Network
SystemOn automatically discovers Shure devices on the local network (automatically populated) and on other subnets (manu­
ally added).
View your device network at All devices. The list provides a snapshot of key device information:
Device: The model and user-editable name
Location: The location the device in the software
Network: IP address and online/offline status
License status: All features are unlocked for licensed devices
Shure Incorporated
Adding Devices From Subnets
Depending on the infrastructure of the organization, equipment may be separated into subnets to improve network manage­
ment and reduce traffic. It is common for buildings or campuses to be on subnets and connect to the main server using a
SystemOn automatically discovers Shure devices on the same subnet. To manage devices on other subnets, add their IP ad­
dress through the application to establish the network route.
Shure Incorporated
Control Across Subnets
Import IP addresses for devices on subnets
Tip: Set devices to static (manual) IP addresses to ensure they will not change.
1. Go to All devices > Devices.
2. Press Add by IP to add a device by its IP address.
3. Enter the control IP address for each device you'd like to add:
◦ Individually: Enter the IP address of each device on its own line
◦ Bulk: Upload a full list of IP addresses by selecting ADD FROM FILE
4. Press ADD and the devices will appear in the Devices list when the connection is established.
MXW Mic Linking Across Subnets
To link MXW microphones over the network, make sure to add the charging station by IP address using the method listed
above. This ensures that it can be used for any access point, regardless of subnet.
Pending IP Addresses
If the IP address was entered incorrectly, or the device is not connected properly to the network, the device will be listed in All
devices > PENDING. The PENDING tab provides a quick snapshot of the devices manually added that do not have a valid
path the software server.
Organizing Devices by Locations
Categorize your network devices according to their installed location using SystemOn. Locations provide the technical support
team with a clear and organized system to keep track of equipment throughout the day, prepare for events, and troubleshoot
wireless microphones. This is especially useful for universities and corporations with multiple buildings and campuses, where
organization is critical to saving time and solving issues.
Tip: Subscribe technicians to each location to provide more efficient supervision of your equipment.
View Devices in a Location
Shure Incorporated
A location is a subset of your audio network, focusing attention on the devices installed in that space
Creating a New Location
1. Go to Locations.
2. Select New Location and enter a name.
3. Select ADD and the new location is added to the list.
to edit your location name.
Location Groups
To more accurately represent your installation, nest the locations into groups.
1. Select Locations on the main menu.
2. Select NEW GROUP to create a new group.
3. Type a group name.
4. Click ADD to create the group.
5. Select a location and add it to a group by dragging it.
Organize Your Locations
2 meeting rooms on the 3rd floor
Adding Devices to the Location
Select devices to add to your location:
1. Go to All devices.
Shure Incorporated
2. Choose the device(s) and select
(Move to...).
Tip: Identify the device to make sure the right hardware is selected.
3. Choose the location and select Add. A device can only belong to one location at a time.
User Accounts and Roles
Add a User Account
SystemOn dynamically displays content based on a user's roles and subscriptions. Accounts include contact information used
to send email and phone notifications to technicians.
Tip: Integrate with your LDAP server to add users from your organization’s database
1. Select Users on the main menu.
2. Select Add user.
3. Enter the user information and save it to create the account. If you have integrated with your LDAP server, select Add
from LDAP to import the username and account information.
Edit User Information
To edit your account information, open
and select your username to go to My Account. Some fields may only be edited by
the administrator or your organization’s LDAP database.
Shure Incorporated
Access My Account
If you have the correct permissions, you can edit another user's account information and location subscriptions.
1. Go to Users.
2. Choose the user and select
to edit their account.
SystemOn User Database
Account Information
Edit user information:
Preferred language
Contact information
Go to Locations. Select the Subscriptions tab to specify the users subscribed to the location. Subscriptions provide the user
with access to those devices and notifications for system updates related to the location.
Change the Language of the Interface
Go to My Account > My info and select your preferred language.
Shure Incorporated
Import Users from your LDAP Directory
Add accounts from your user directory by integrating with your LDAP (Lightweight Directory Access Protocol) database. LDAP
integration reduces set up time by importing existing users and simplifies your team's workflow by using the same sign in cre­
1. Go to Settings > Integrations.
In the LDAP section, click Enable.
Fill out the required fields according to your LDAP server settings.
Select Test connection to verify the integration is successful.
Click Enable.
LDAP Passwords
For users imported from LDAP, passwords are maintained by the LDAP database and referenced by SystemOn during sign in.
To avoid a conflict with the database, these users cannot reset their passwords through SystemOn.
Roles and Access Levels
User accounts are assigned a role that determines their access to features in the application. Upon installation, the admin ac­
count is automatically created with full privileges from the Administrator role.
When creating users, assign them a role based on their responsibilities and tasks. You can select from the roles provided in
SystemOn, or create a custom role with the exact permissions required for their workflow.
Assign Roles to Users
Assign roles when creating the user account or by editing the account from the ROLES AND PERMISSIONS tab of the Users
Pre-built Roles
The default admin role has full access and permissions in the software. Core tasks for ad­
mins include adding user accounts, creating locations, and subscribing users to the loca­
The technician role can monitor and control devices but has limited access to changing soft­
ware settings. Technicians are focused on managing the locations assigned to them by ad­
Create Custom User Roles
You can create custom user roles to best accommodate your team's workflow.
Adjust the permissions at Users > ROLES AND PERMISSIONS. Select a role and click
missions for each category.
(Edit role) to enable or disable per­
Shure Incorporated
Permission Categories
My Account
Personal, contact, and subscription information.
Event Log
System data constantly collected by SystemOn, typically used for troubleshooting and sys­
tem maintenance.
System settings such as network selection and event log storage.
Adjust how and when your team receives notifications.
Integrate with your organization’s LDAP database and set up automated SMS text mes­
sages and email notifications.
License activation
Apply your license plan in the software to enable SystemOn features.
License Devices
Assign/remove licenses to/from each device.
The SystemOn user database.
Access levels for each user.
Monitor and Control De­
Monitor devices in real-time and make adjustments.
Create locations and add devices to them.
Location Subscriptions
SystemOn displays information relevant to each user based on their location subscriptions. When subscribed to a location, the
user has access to those devices and tools to help manage them:
Shure Incorporated
Lowest Batteries
The homepage provides a quick snapshot of the lowest battery levels for all mics on air
Notification Messages
Receive SMS text message and email notifications for important system updates
Tailored Location List
Only see the devices that belong to your subscribed locations
Assign Subscriptions
Set up subscriptions for your team by assigning users to each location. Make sure to create user accounts before beginning.
Go to Locations and open a location.
Select the Subscriptions tab.
Specify the names of the users to subscribe to this location.
Repeat for additional locations.
Notifications and Alerts
Proactively manage devices by receiving emails and SMS text messages for important system events. Notifications are sent
for the devices that are included in your subscriptions, providing up-to-date information straight to a phone or mobile device.
Shure Incorporated
• Low Batteries: Shure smart, rechargeable batteries allow reliable battery management by accurately and continuously re­
porting remaining levels. Receive a notification whenever a battery reaches the remaining threshold (adjustable from 5 to
360 minutes left).
• Missing Device: Receive a notification whenever SystemOn cannot locate a device, for example, when a microphone
stops communicating with its group because it is out of range or powered off, or when a P300 is no longer on the network
because it was disconnected or lost power.
Go to Settings > Integrations to set up SystemOn with SMS text messages and email notifications.
Change Notification Settings
Choose how and when your team receives notifications. Go to Settings > Notifications to select a delivery method for
each type of notification:
• SMS text messages
• Email
Shure Incorporated
Regardless of SMS and email settings, you and your team can always view a history of these messages by opening
cations from anywhere in the application.
View In-App Notifications
Missing Device Notification
Receive notifications when a device is no longer accessible through the software. A missing device notification will be sent for
one of the following reasons:
• Networked devices: When a device is powered off or disconnected from the network
• MXW microphones: When an MXW microphone is powered off, runs out of batteries, or is out of range from the access
Shure Incorporated
Low Battery Notification
When using Shure rechargeable batteries, schedule notifications for when any microphone reports a low battery level. Adjust
the notification threshold from 5 to 360 minutes of remaining battery time.
Note: Microphones using other types of batteries do not calculate time remaining and therefore do not trigger low battery notifications.
Integrating SystemOn with your Network Services
Connecting to the SMTP Server
Set up automatic emails to notify your team of important updates to their devices.
1. Go to Settings > Integrations > Email.
2. Enter your SMTP server settings.
3. Test the settings to ensure that the integration is successful.
From: AV-Alerts []
Sent: Friday, December 16, 2018 10:29 AM
To: AV Tech
Subject: SystemOn - Device is missing - Channel 1
Hi Tech,
Device is missing:
Channel 1 ( is missing.
Last seen at 12/16/2018 10:29:19 AM
Shure Incorporated
Set Up SMS Text Message Notifications
Set up automatic SMS text messaging to alert your team of important updates to their devices. Shure SystemOn uses your
Twilio account to facilitate the messages.
Note: An internet connection is required on the server or computer installed with SystemOn
1. Create a Twilio account at Use information from your Twilio account to integrate with SystemOn:
◦ Twilio account ID
◦ Twilio Token
◦ The "from" phone number for the Twilio account (if set up)
2. Go to Settings > Integrations > SMS.
3. Test the settings to ensure that the integration is successful. A message is sent to the phone number entered from the
Twilio account.
4. Add phone numbers for each of your team members by editing their accounts at Users.
Monitoring Hardware and Making Adjustments
Battery Management
Shure Rechargeable Batteries
Shure lithium-ion rechargeable batteries use advanced chemistry that maximizes transmitter runtime with zero-memory effect.
Power management from the control software provides detailed visibility to critical battery parameters such as charge status,
battery capacity, and cycle count.
SystemOn cannot provide these details for non-Shure batteries.
Viewing Battery Levels
Use SystemOn to view battery information for wireless microphones belonging to your locations. Most battery features and de­
tails are available for Shure batteries only.
Homepage Dashboard
Quickly view the status of batteries across your locations from the homepage.
Lowest Batteries table
Displays the lowest batteries levels for all mics on air. The table prioritizes the batteries with
the least time left and provides device and location details to easily make any necessary ad­
Inventory Summary
Displays any notifications triggered by the low battery threshold. Team members assigned to
these locations receive the same alert to their phone or email, depending on your team's set­
Shure Incorporated
Location Monitor View
View individual channel details from Locations > Monitoring.
The channel indicates when a battery is fully charged and provides time in detail for microphones in use (time remaining) or
charging (time until full):
Shure Incorporated
Non-Shure batteries display an approximation of remaining battery levels:
Shure Incorporated
Viewing Battery Statistics
Use the battery statistics to track battery performance and plan for battery replacements. View statistics by selecting a channel
in a location and opening the properties panel.
Battery Health
The microphone battery's percentage of charge capacity as compared to a new battery.
Cycle Count
Number of charge cycles logged by the battery.
Keeping Track of Devices
Identifying a Device from the Software
Before making changes in the software, use Identify to make sure you are interacting with the right hardware. The indicators on
the device flash to create a visual link between the selection in the application and the hardware.
1. Select a device from one of your locations or the Devices page.
Shure Incorporated
2. Turn on Identify from the Device properties panel. The hardware will flash to confirm that the selection in the application
is the correct device.
Use Identify to Confirm Your Selection
Online/Offline Device Status
Quickly view the status of your Shure devices at glance using SystemOn. A status bar indicates the availability to help your
team prepare for events and troubleshoot issues.
Shure Incorporated
The device is online and ready to use.
SystemOn cannot connect to the device at this time. The device persists in the list because it
is licensed and/or included in a location. A device displays as offline for one of the following
• Powered off
• Disconnected from the audio network
• If set to another subnet, the device IP address changed since it was initially added from
the Add by IP Address tab.
You can quickly check the entire device network from the All devices page or from within a single location (Locations > [se­
lect a location] > Devices).
Search for a Device or Microphone Transmitter
Search or filter to find a specific networked device or group of devices in your system at All devices > DEVICES.
To find a wireless microphone transmitter, use the TRANSMITTER tab.
Use the information in the table to track devices and troubleshoot issues.
Shure Incorporated
Use filters to narrow your search and display categories of devices, such as all gooseneck microphones, or all devices that
are unlicensed.
Dynamically displays results as you type.
Keeping Track of Wireless Microphones
Use SystemOn to keep track of wireless microphones throughout your installation. Wireless microphones use the link to their
corresponding IP-addressable parent devices, such as receivers or access points, to communicate to the SystemOn network.
Tip: Make sure to use Shure rechargeable batteries to view the full details provided in SystemOn.
Mics on Air
Full Transmitter List
Quickly view a subset of the microphones on air from the homepage. This list collects the mi­
crophones with 10 lowest batteries across your installation so you can prioritize your tasks
and resolve issues as soon as possible. Go to Menu > Home.
For a full list of your microphone transmitters in your system, go to the transmitters tab on
the Devices page (Menu > All devices > Transmitters tab). You can search or filter to
find a specific microphone or category of microphones.
Working With Locations
Locations provide technicians with tools for managing the devices and preparing for events.
Two views are available for working with locations: Monitoring and Devices tabs.
Shure Incorporated
Interact with devices, channels, and microphones for managing live events:
Battery/charging status
Audio and RF signal levels
MXW microphone linking
Audio gain
View high-level information at a glance:
• List of all devices in the location
• IP address and online status
• License status
Shure Incorporated
Adjusting Microphone Gain and Mute
When setting up your location, you can improve the overall sound by making adjustments to microphone gain and muting un­
used channels.
1. Select a channel on the Monitoring page.
2. Adjust the gain level or change the microphone state.
Linking MXW Microphones
Use SystemOn to easily prepare and deploy a new microphone to resolve a low battery issue or a request for a different micro­
phone type.
You can use an existing MXW charger or dedicate one specifically to store and link extra microphones from a centralized help
Shure Incorporated
Remote Linking
Use SystemOn to create a link to a new microphone and an access point installed on the network.
Prepare the hardware:
1. Connect the charging station to the network.
Tip: Rename a spare charger to easily distinguish it from other chargers on the network (example: "Help desk charg­
2. Place the new microphone in a charging slot.
Use SystemOn to link the mic:
1. Open SystemOn to the location you want to update.
2. On the Monitoring tab, select the desired channel and expand the properties panel if it is not already open.
3. Open the primary or secondary slot and click Link microphone.
Shure Incorporated
Tip: Use primary slot to replace the most commonly used microphone, or use secondary slot to add a backup micro­
phone to that channel.
4. Select a charger from the list.
5. Then, select the slot you are using for the microphone.
Shure Incorporated
Note: If you do not see the microphone you just placed in the charger, try refreshing the list
6. Select Link to confirm the new microphone.
If you don't see the charger you want to use, make sure it is licensed and placed in a location you are subscribed to. If the
charger appears in the list but is not accessible, make sure to upgrade it to the latest supported firmware version.
Preparing a Backup Microphone
Prepare an alternate microphone for each channel for more reliable and flexible events. Two MXW microphone transmitters
can be linked to the same channel, providing the option of either microphone for use.
Link a mic to the secondary slot to anticipate needs that may arise during events:
Microphone Preference
Give presenters a choice between two different microphone types, such as handheld or bodypack microphones.
Charged Backup Microphones
Prepare for long events by linking fully-charged microphones as backups
Shure Incorporated
Shared Resources
Easily add a temporary microphone without unlinking the most commonly used microphones.
One Active Mic per Channel
Only one microphone will operate on the channel at a time, blocking the second microphone from interfering with the RF and
audio performance. The backup microphone briefly flashes the LED to indicate the channel is occupied, and automatically
turns off to conserve the battery. To use the second microphone, simply turn off the first microphone.
Two Microphones Ready for the Audio Channel
The system allows one live microphone per channel.
Linking a Backup Mic in SystemOn
Use the a channel's secondary link slot to prepare the backup microphone.
1. Open the desired location to the Monitor tab.
2. Select the channel and open Secondary slot in the properties panel.
3. Click Link Microphone and finish the procedure in the same way you would a primary microphone.
Device Properties
Select a channel or device to view settings and controls from the Properties panel. If you do not see the Properties panel, max­
imize your browser window or click
(Device properties) to open the Properties panel.
• Activate or mute the audio
• View IP address and network settings
• Identify the hardware
Shure Incorporated
Open Device Properties
Open the Devices tab in a location or go to All devices. Select the device and open the Prop­
erties panel.
Open Channel Properties
Open the MONITORING tab in a location. Select the channel and open the Properties panel.
General Device Properties
Device Name
Editable name for the device.
Dante Device Name
The name for the device as listed in Dante™ Controller (DC) software.
Device Model
The Shure model name.
Identify Button
Sends a signal to the device to flash its LEDs for easy identification.
Serial number
Shure Incorporated
The unique identifier used to register the device at the Shure website, guarantee the warranty, and troubleshoot with cus­
tomer support.
Firmware Version
The current firmware version installed on the device.
Device Runtime
The time that the device has been powered on.
Device Controls
Make changes such as audio mute and front panel lock. Controls vary slightly per device.
Microphone State
Front-Panel Lockout
Audio on; RF connection
Audio mute; RF connection
Sleep mode with audio mute and minimal RF activity
No power (requires powering on at the device)
Controls are disabled on the hardware front panel to avoid unauthorized or accidental
Network Properties
Network properties are viewable from the device properties panel. Shure devices with Dante digital audio have two network ad­
• Control network: Discovery and control of the device from SystemOn and other Shure software tools.
• Audio network: Transport and control for Dante digital audio.
Sets IP mode of the selected network interface:
IP Mode
• DHCP: For automatic assignment of IP addresses.
• Manual (Static): For Static IP addresses.
IP Settings
Displays the IP Address, Subnet Mask, and Gateway for each network interface.
MAC Address
The network interface's unique identification.
Shure Incorporated
System Maintenance and Troubleshooting
Event Log
The event log collects important account, device, and network activity. Each event includes time and information on the device
and location.
Reference the log to monitor system events and troubleshoot issues related to your audio network.
The following are examples of events listed in the log:
Online/offline device availability
Microphone missing (powered off or out of range)
Server and system integration interruptions
License status and expiration notices
Sign in and account activity
Viewing Event Log
Open the event log from Event Log in the main menu.
To export the event log to a CSV (comma separated values) document, click Export log.
Exporting the Event Log
To troubleshoot problems related to SystemOn, save a snapshot your system events by exporting and saving the file to a com­
puter. Refer to the log file for monitoring system events, troubleshooting issues, or consulting with Shure Systems Support.
Supported Devices and Firmware
The following Shure devices and firmware versions are supported in SystemOn. Whenever possible, upgrade to the latest sup­
ported versions to take advantage of new features and system improvements.
Use the Shure Update Utility application to ensure your hardware meets these requirements.
Shure Incorporated
Firmware Version
ANIUSB-MATRIX Audio Network Interface
MXA310 Table Array Microphone
MXA910 Ceiling Array Microphone
MXW Microflex Wireless System
P300 IntelliMix® Audio Conferencing Processor
SBC220/240 Networked Charging Station
SBC250/450/850 Networked Charging Station
SCM820 Digital Intellimix Automatic Mixer
ULX-D Digital Wireless System
View User Guides Online
View user guides and detailed information for Shure devices at
Firmware Updates
Firmware is embedded software in each device that controls functionality. Periodically, new versions of firmware are developed
to incorporate additional features and enhancements. To take advantage of design improvements, new versions of the
firmware can be uploaded and installed using the Shure Update Utility (SUU). Download the SUU from
Perform the following steps to update the firmware:
CAUTION! Ensure the device has a stable network connection during the update. Do not turn off the device until the update is complete.
1. Connect the device and computer to the same network (set to the same subnet).
Note: The update process for wireless transmitters varies for each product; see that device's user guide for exact steps.
2. Open the SUU application.
3. Click the Updates button at the top of the window to open the Download Manager.
Note: This button will be labeled either "Check for updates..." or "[#] updates available"
4. From the Download Manager, select the desired firmware versions.
Tip: The dropdown in the upper right allows you to quickly Select: All or Select: None.
Note: After updating, you may need to clear your browser's cache to display updates to the device's web application.
5. Click Download, and then Close the Download Manager. Downloaded firmware is listed and can be viewed and man­
aged in the Firmware tab.
6. From the Update Devices tab, select the new firmware and press Send Updates to begin the firmware update, which
overwrites the existing firmware on the device.
Firmware Release Requirements
Shure devices use multiple communications protocols that work together to ensure proper operation. The recommended best
practice is that devices in the same model family are on an identical release. To check the firmware status of each device on
the network, open the SUU and view current version on the Update Devices page.
Shure Incorporated
The format for Shure device’s firmware is MAJOR.MINOR.PATCH. (Ex. 1.6.2 where 1 is the Major firmware level, 6 is the Mi­
nor firmware level, and 2 is the Patch firmware level.) At minimum, devices that operate on the same subnet should have
identical MAJOR and MINOR release numbers.
Backup and Restore the Database
Protect against data loss by backing up the MongoDB database (installed with SystemOn) that stores your Shure software in­
formation. Backups are also useful when migrating to a new server.
Backups store all projects, locations, and device settings that your team makes in the software. For backup restoration, only
those backup files (.bak) that match the current operating software version are supported.
Backup the Mongo Database
Use the machine installed with the software to create the MongoDB backup.
Identify a location to archive the database backup. You use this path in the command line.
Begin to open a command prompt by opening the Start menu and start typing “command”. Do not press Enter.
Right-click the command prompt item and select Run as administrator.
Type the following command line (including quotation marks for file paths) after replacing the placeholders marked by
[ ]:
"[location of SystemOn Software install directory]\Services\MongoDb-3.2.0\Bin\mongodump.exe" --host localhost
--port [number chosen at install] --gzip --archive="[path and file name of backup]"
Tip: Sample command line with default settings:
"c:\Program Files\Shure\Shure Networked Systems Software\Services\MongoDb­3.2.0\Bin\mongodump.exe" ­­host lo­
--port 30000 --gzip --archive="c:\Shure.bak"
5. Press Enter. The file is archived at the path specified in the prompt.
Restore a Database Backup
1. On the machine installed with the software, open a command prompt by opening the Start menu and start typing “com­
mand”. Do not press Enter.
2. Right-click the command prompt item and select Run as administrator.
3. Type the following command line (including quotation marks for file paths) after replacing the placeholders marked by
[ ]:
"[location of SystemOn Software install directory]\Services\MongoDb-3.2.0\Bin\mongorestore.exe" --host localhost
--port [number chosen at install] --drop --gzip --archive="[path and file name of backup]"
Tip: Sample command line with default settings:
"c:\Program Files\Shure\Shure Networked Systems Software\Services\MongoDb­3.2.0\Bin\mongorestore.exe” ­­host lo­
--port 30000 --drop --gzip --archive="c:\Shure.bak"
4. Press Enter.
5. Reload the database configuration by typing
at the command prompt.
Shure Incorporated
Cannot sign in to the software
Possible Cause
Forgot the username or
• Follow the links on the sign in screen to look up your username or reset your password.
• If user was created from LDAP, no changes are allowed from SystemOn. Try signing in
to your network and contact your network administrator.
Locked out after entering
invalid credentials
• Wait 10 minutes before attempting again.
• Reset your password.
• If user was created from LDAP, contact your network administrator.
Devices Are Not Showing Up
Possible Cause
Devices are not ready
The wrong network inter­
face card (NIC) is selected
Devices on subnets have
invalid IP addresses
Network traffic not routing
between the server and de­
• Power on the devices.
• Connect the devices to the network.
The NIC connects the SystemOn server to the device network. Go to Settings > General
> Network setup and verify the selected NIC corresponds with the device network.
Make sure devices have valid, routable IP addresses and that they are entered correctly into
SystemOn All devices > Devices > ADD BY IP. Use static IP addresses for devices on
separate subnets to ensure they don't change by DHCP.
Ping the device by IP address to see if it is responding properly outside of SystemOn.
Reset the device to default settings.
Make sure that unicast traffic is routing properly between your server and the devices.
Consult your network administrator
Cannot Open or Monitor a Device
Possible Cause
Device is offline
• Connect the device to the network
• Check the solutions listed above in "Devices Are Not Showing Up"
Shure Incorporated
Possible Cause
License is not assigned to
the device
Assign a license to each device you want to monitor. It should display in the device list as
Check that device firmware versions are supported by SystemOn. Select a device and go to
Properties > About > Firmware version. A notice displays if the version is not support­
Devices are operating on
unsupported firmware ver­
See the installation guide for the current list of supported firmware for each device and up­
date them accordingly using the Shure Update Utility application.
Access Control is enabled
on a device
If a device displays with the network lock icon
, you can manage this setting using the
Shure software that enabled Access Control. Access Control prevents any user from control­
ling or editing device settings from SystemOn.
Users Are Not Receiving Notifications
Possible Cause
Subscriptions have not
been assigned to users
Check that the correct users are subscribed to the location Locations > [Select a ­
Notifications are turned off
Enable notifications and select the delivery method from Settings > Notifications.
Wrong contact information
Verify the users' contact information from Users > Users > [Select a user].
User opted out of SMS
Respond from an older message with START, YES, or UNSTOP to resume service.
Email and SMS integra­
tions are not set up
location] > Subscriptions.
Make sure the right SMTP and Twilio information is entered in Settings > Integrations.
Test the connections to receive sample notifications to the account currently being used to
troubleshoot the issue.
Shure Incorporated
Possible Cause
Server is not connected to
the internet
Make sure the SystemOn server is connected to the internet to facilitate the SMS text mes­
Emails are filtered
Check the SPAM folders of your email account to make sure they aren't filtered.
Cannot Apply License Plan
Possible Cause
Server is not connected to
the internet
Follow the prompts in SystemOn for the offline application method.
Your activation ID is in­
Call Shure customer support to obtain a new ID.
NIC is removed or not ac­
Restart the Shure Inventory Server from Windows > View local services. Right click
and restart Shure Inventory Service and reopen SystemOn.
Application is behaving unexpectedly
Possible Cause
No or poor connection to
the server
• Refresh the browser.
• Ensure a strong connection to the server.
Browser cache is causing
Clear your browser cache.
Browser is out of date
Update to the latest version of your browser. See the installation guide for supported brows­
er versions.
Server clock was changed
Uninstall and reinstall the SystemOn application and database.
More Troubleshooting Help
For additional troubleshooting assistance or further information on complex installations, contact your local Shure sales repre­
sentative, distributor, or Shure Systems Support. In the Americas region, call the Systems Support group at 847-600-8440. For
users in other locations, go to to find support contact for your region.
To more effectively troubleshoot your issue, export the SystemOn event log and have it ready when you contact support. The
exported log includes data from your hardware, server, and SystemOn activity to provide Shure support with more information
about your installation. Export the log from Event Log > Export Log.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF