Shure | SE215M | User guide | Shure SE215M Earphones User guide

Shure SE215M Earphones User guide
SE215M
Shure Earphones
General Description
Shure Sound Isolating™ Earphones, deliver a detailed soundstage free from
outside noise. The powerful and stylish Shure SE earphones come with a
detachable cable, adapters, a durable carrying case, and interchangeable
Sound Isolating sleeves for a comfortable and personalized fit.
Wearing the Earphones
The following are some suggested ways of wearing the earphones.
Wear the cable over the ear and secure it behind the head to help keep the
earphones in place during physical activity.
Tighten the cable and take up slack by raising the cable cinch.
Over the ear in back
Detachable Cable
You may need to detach the cable from the earphones to attach optional
components or to replace the cable if it becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent
damage to the earphone and connector.
•
Do not use pliers or other tools.
•
Grasp the connector and the earphone as close as possible to where
they join.
•
Pull straight apart—do not twist. Cable is a snap fit, not threaded.
Audible click when properly connected
Note: If you pull at an angle, the connector will not detach.
•
Do not pull on the cable or put any pressure on the earphone nozzle.
•
Listen for a click when connecting.
•
When reattaching the cable, match the "L" and "R" markings. For clear
cables and earphones, match the color dots (Red=Right, Blue=Left).
Inserting the Earphones
Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.
©2017 Shure Incorporated
1/4
SE215M Shure Earphones
Shure Incorporated
Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone
deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Changing Sleeves
•
Twist and pull to remove the sleeve from the nozzle.
•
Slide on a new sleeve so that it completely covers the barb and the
nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure
proper fit and performance, use only sleeves supplied by Shure (unless using
custom molded sleeves).
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
2/4
Note: Do not pull on cable to remove earphone.
2017/10/09
SE215M Shure Earphones
Shure Incorporated
Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It
should be easy to insert, fit comfortably, and easy to remove.
Soft Flex Sleeves: In small, medium, and large
sizes. Made from pliable rubber.
Soft Foam Sleeves: Compress the foam sleeve
between your fingers and insert into the ear canal.
Hold in place for about ten seconds while the foam
expands.
Triple-Flange Sleeves: If desired, use scissors to
trim the stem on the sleeve.
Using the Remote
Use the remote to control compatible media phone players.
•
Answer/End Call: Click the center button once.
•
When answering calls speak in a normal manner.
•
Answer/end calls on most phones by pressing the center button once.
Please read your mobile device's user guide for more information on how to
use the answer/end button, check for additional features, or to troubleshoot
usage problems.
NOTE: On some phones it might be necessary to adjust the volume when
switching from phone call to music.
For more information about compatible models go to: www.shure.com
Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle,
improving sound quality and product safety.
•
Keep the earphones and sleeves as clean and dry as possible.
•
To clean sleeves, remove them from earphones, gently rinse in warm
water and air dry. Foam sleeves require a longer drying time. Inspect for
damage and replace if necessary. Ear sleeves must be completely dry
before reusing.
•
Wipe the earphones and sleeves with mild antiseptic to avoid infections.
Do not use alcohol-based disinfectants.
•
Do not expose earphones to extreme temperatures.
•
Replace sleeves if they do not fit properly.
•
Do not attempt to modify this product. Doing so will void the warranty
and could result in personal injury and/or product failure.
Wire Loop
Cleaning Tool
Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the
nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire
loop end of cleaning tool.
If no obstruction is found or if sound quality does not improve, replace the
sleeve with a new sleeve.
Caution: When cleaning, do not force any object through the earphone
nozzle! This will damage the earphone sound filter.
Warning: The cleaning tool is only to be used to clean the earphones. Any
other use, such as using the tool to clean ears or foam sleeve, could result
in injury.
The cable connectors to the earphones may collect debris or other deposits
that can affect audio quality. If this happens, disconnect the cables and clean
them using a dry cotton swab.
Specifications
Transducer Type
Single High-Definition MicroDriver
2017/10/09
Sensitivity
at 1 kHz
107 dB SPL/mW
3/4
SE215M Shure Earphones
Shure Incorporated
Impedance
Frequency Range
at 1 kHz
17 Ω
SE215 Special Edition
21 Hz–17.5 kHz
SE215
22 Hz–17.5 kHz
Net Weight
30 g (1 oz.)
Accessories
For information about earphone accessories and other Shure products visit:
Furnished accessories subject to change.
www.shure.com
Certifications
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com
4/4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising