Shure | PS | User guide | Shure PS Power Supply User guide

Shure PS Power Supply User guide
PS24 PS43 PS60 PS51
Power Supply
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
13. UNPLUG this apparatus during lightning storms or when unused for long
periods of time.
2. KEEP these instructions.
14. REFER all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Allow sufficient distances for
adequate ventilation and install in accordance with the manufacturer’s
instructions.
15. DO NOT expose the apparatus to dripping and splashing. DO NOT put
objects filled with liquids, such as vases, on the apparatus.
8. DO NOT install near any heat sources such as open flames, radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product.
17. The airborne noise of the Apparatus does not exceed 70dB (A).
9. DO NOT defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wider blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
19. To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
16. The MAINS plug or an appliance coupler shall remain readily operable.
18. Apparatus with CLASS I construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
20. Do not attempt to modify this product. Doing so could result in personal
injury and/or product failure.
21. Operate this product within its specified operating temperature range.
10. PROTECT the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
11. ONLY USE attachments/accessories specified by the manufacturer.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
12. USE only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The
safety certifications do not apply when the operating voltage is changed from
the factory setting.
General Description
Energy-efficient external switching mode AC/DC power supply, for use with
Shure products world-wide.
Specifications
PS24
PS43
Output
PS51
SBC10-USB
PS-CCU
100–240V AC, 50–60 Hz
Input
Current Drain (maximum)
PS60
150 mA
250 mA
12V DC, 400 mA 15V DC, 600 mA
Operating Temperature Range
1.3 A
400 mA
0.2 A
1.6 A
15V DC, 4.0 A
5.5V DC, 2.72 A
5V DC, 1.0 A
48V DC, 3.1 A
0°C (32°F) to 40°C (104°F)
Certifications
Meets requirements of the California Energy Commission: CEC-400-2010012: December 2010.
©2017 Shure Incorporated
Approved per Australian Standard requirements of AS/NZS 4665.1:2005 and
AS/NZS 4665.2:2005.
1/2
PS24 PS43 PS60 PS51 Power Supply
Listed per safety standard ANSI/UL 60065, CAN/CSA 22.2 E60065, EN60065,
and AS/NZS60065.
Conforms to the relevant requirements of regulation (EC) No.278/2009, for
low voltage external power supplies.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Shure Incorporated
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Information to the user
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
Operation of this device is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising