Shure | GLXD-Color | User guide | Shure GLXD-Color Handle Installation User guide

Shure GLXD-Color Handle Installation User guide
GLXD Color Handle Installation
GLX-D Color Handle Installation
Removing the Microphone Handle
௟
௠
௡
1. Unscrew and remove the battery cover.
௢
2. Unscrew the grille and carefully remove it so that it does not scrape
against the microphone assembly underneath.
3. Remove the lock ring using the same procedure as removing the grille.
4. Slide the cover off the microphone.
GLXD2
on
GLXD2
on
GLXD2
GLXD2
on
on
Installing the Custom Handle
௟
௠
௡
௢
GLXD2
on
GLXD2
on
GLXD2
on
GLXD2
on
1. Slide the new cover onto the top end of the microphone.
2. Carefully slide the lock ring over the microphone assembly and tighten
clockwise.
3. Gently guide the grille over the microphone assembly and tighten clockwise.
4. Install the new battery cover on the microphone and rotate clockwise to
tighten.
©2017 Shure Incorporated
1/1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising