Shure | 55SH-II | User guide | Shure 55SH-II Iconic Unidyne® Vocal Microphone User guide

Shure 55SH-II Iconic Unidyne® Vocal Microphone User guide
Model 55SH-II
Iconic Unidyne Vocal Microphone
General Description
The Model 55SH Series II provides the Shure Iconic UNIDYNE design coupled
with modern acoustic components to meet today's performance standards.
This microphone is excellent for vocal pickup with its characteristic Shure
presence peak.
Features
•
Uniform cardioid pick-up pattern for maximum gain before feedback and
excellent rejection of off-axis sound
The 55SH Series II has a cardioid (unidirectional) polar pickup pattern that
minimizes sound pickup from the rear of the microphone. This allows the
Model 55SH Series II to be used in close proximity to loudspeakers without
creating feedback problems, and it can perform under adverse acoustic
conditions where omnidirectional microphones cannot.
•
Tailored frequency response specifically shaped for speech, vocals and
instrumental music
•
Chrome die-cast metal construction and mechanical design resists wear
and abuse
•
Classic appearance, modern performance
The 55SH Series II has a low-impedance balanced output designed for
connection to microphone inputs rated at 75 to 300 ohms. The microphone
features a cartridge shock mount to reduce stand noise, an On/Off switch,
and an attached, self-tensioning, 5/8"–27 thread swivel mount.
•
Shock mounted cartridge minimizes stand transmitted noise, ensures
quiet operation
•
Self-tensioning swivel mount permits tilting through 45 degrees forward
and 80 degrees backward
This microphone is ideal for public address or theater-stage sound systems,
as well as for broadcasting, recording, and other sound applications where
a stand-mounted microphone with a classic look is desirable.
•
On/Off switch
•
Shure quality, ruggedness and reliability
Specifications
Type
+20
Dynamic (moving coil)
+10
50 to 15,000 Hz
Polar Pattern
Cardioid
Output Impedance
dB
Frequency Response
0
–10
–20
20
50 100
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
EIA rated at 150 Ω (270 Ω actual)
Sensitivity
2
Typical Frequency Response
at 1 kHz, open circuit voltage
-58.0 dBV/Pa[1]
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
0.624 kg (1.37 lb)
Housing
Chrome-plated die casting
50 Hz
200 Hz
500 Hz
1000 Hz
5000 Hz
0
Typical Polar Patterns
0
[1] 1 Pa = 94 dB SPL
©2017 Shure Incorporated
1/2
®
Model 55SH-II Iconic Unidyne
Shure Incorporated
Vocal Microphone
Switch
55.6 mm
(2 3/16 in.)
77.8 mm
(3 1/16 in.)
Cartridge
100 mm
(3 15/16 in.)
115 mm
(4 17/32 in.)
Black
Yellow
Black
34.1 mm
(1 11/32 in.)
27 mm
(1 1/16 in.)
73 mm
(2 7/8 in.)
Coded Terminal
Blue
Off
5/8 - 27 TH’D
42.1 mm
(1 21/32 in.)
23.8 mm
(15/16 in.)
Overall Dimensions
Accessories
Replacement Parts
Optional Accessories
7.6 m (25 ft.) Cable (XLR-XLR)
C25J
Cartridge for 55SH Series II
R115
Cartridge for Super 55
R115S
Certifications
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising