Clearone CMA Analog-X Quick Start Guide

Clearone CMA Analog-X Quick Start Guide

Ceiling Microphone Array Analog-X

Quick-Start Guide

Table of Contents

PRODUCT OVERVIEW .................................................................. 1 PARTS ............................................................................................ 1 TOOLS REQUIRED ........................................................................ 1

INSTALLATION .............................................................................. 2 MICROPHONE ARRAY PLACEMENT ........................................... 2

COMPLIANCE ................................................................................ 5

CE................................................................................................... 5 PLENUM ......................................................................................... 5

QUICK-START GUIDE

PRODUCT OVERVIEW

The Ceiling Microphone Array (CMA) Analog-X is the newest and most advanced tri-element CMA addition to our ceiling mic lineup for conferencing and sound reinforcement applications. Flexible and easy to use, the Analog-X is 100% RF immune, optimized for speech-intelligibility, and can daisy-chain for easy installation.

PARTS

The Analog-X CMA comes with the following parts: • Mic Array • Junction Box • Interface Box & Power Supply The mic array is made up of 3 components: Mic Capsule Drop Cable Integrated Fixing Assembly that allows drop-down height adjustment

TOOLS REQUIRED

A drill with a 7/8” saw bit

1

CEILING MIC ARRAY ANALOG-X

MICROPHONE ARRAY PLACEMENT

Determine placement of an array by its pickup pattern and room characteristics. Adjusting drop-down height from 0 to 7 ft. determines how close an array is to users, and how far its pickup pattern extends.

INSTALLATION

1. Drop the ceiling tile where you are installing the microphone array.

2. Place the Junction Box in the space above the suspended ceiling where you want to place the microphone array.

3. If mounting, secure screws. You must supply your own screws appropriate to your mounting structure.

NOTE:

Mount ears are pre-installed on the Junction Box, with holes sized for M3 or #6 size screws.

IMPORTANT:

Installer is responsible for making sure structure can support the weight of all equipment. Reinforce ceiling structure as necessary.

2

QUICK-START GUIDE

4. The holes in the mounts may also be used to attach a Ø3mm (Ø1/8”) safety cable. You must supply your own safety cable.

5. Run the CAT5e/6 cable from the Interface Box location to the Junction Box through the open ceiling to conceal the cable. You must supply your own CAT5e/6 cable.

6. Drill a 7/8” hole in the removed ceiling tile for mic cable pass-through.

7/8” Hole Template

7/8" HOLE TEMPLATE 1:1 SCALE

Drill 7/8” Hole for Placement of Ceiling Adapter 7. Place the ceiling adapter in the hole, and pass the drop cable through.

8. Tighten the washer snugly into place against the ceiling adapter.

9. Adjust the length of drop-down for the cable as needed.

10. Slide the collet cap up to the ceiling adapter, and tighten snugly.

3

CEILING MIC ARRAY ANALOG-X

11. Connect the Analog-X cable to the Junction Box.

12. Put the tile back into place.

Power 13. Connect Euroblock Phoenix connectors from the Interface Box to the DSP mixer.

CAT5E/CAT6 cable, max 200 feet (60 meters) Junction Box Ceiling Tile Mic Array cable max 7 feet ( 2 meters) Interface Box Mic Array 4 GPIO for Mute Control Arrays 1, 2 & 3, 4 CONVERGE Pro 2 Mic Array 3 Mic Array 2 Mic Array 1 Sample Scenario: Four ANALOG-X Mic Arrays connecting to a CONVERGE Pro 2 mixer

4

QUICK-START GUIDE

COMPLIANCE

CE

This product complies with the requirements of the European Community Directive.

PLENUM

This product meets the UL 2043 plenum-rating standard. This certifies that the product has adequate fire resistance and low smoke-emission characteristics to be mounted and operated in a building’s environmental air spaces, such as above suspended ceilings in an office environment.

CLEARONE LOCATIONS Headquarters:

5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116

Tel:

801.975.7200

Sales:

800.707.6994

US & Canada Tel:

801.975.7200

Toll Free:

800.945.7730

Fax:

801.303.5711

International Tel:

+1.801.975.7200

e-mail:

global@clearone.com

Sales Tel:

801.975.7200

e-mail:

sales@clearone.com

TechSupport Tel:

801.974.3760

e-mail:

tech.support@clearone.

com © 2018 ClearOne, Inc. All rights reserved.

Information in this document is subject to change without notice. QSG-0050-001 Rev 1.0 MAY 2018

5

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement