Clearone COLLABORATE Pro 300 Quick Start Guide

Clearone COLLABORATE Pro 300 Quick Start Guide

COLLABORATE

®

Pro 300

Quick-Start Guide

COLLABORATE PRO 300

COMPONENTS INCLUDED

COLLABORATE Pro 300

COLLABORATE Pro 300 codec with power supply, VESA Mounting Plate, and COLLABORATE Remote Control with USB dongle 910-2100-004 UNITE 150 PTZ camera, power supply, USB cable Note: The remote control inside the camera box is only for any advanced configuration in the camera, if required.

For the camera’s control, use the COLLABORATE Codec Appliance’s remote control.

910-3001-200 CHAT 150C with USB cable

2

QUICK-START GUIDE

CONNECTING PERIPHERALS

Connect the CHAT 150C, UNITE Camera, monitor(s), and network to the COLLABORATE Pro 300 codec as shown.

HDMI 1080P or 720P Video/Audio Out (for Primary Monitor) DC In USB Port for UNITE Camera Mini Display Port (for 2nd Monitor) DC In Ethernet Connection to Network USB 3.0 Port for CHAT 150C

CONNECTING REMOTE CONTROL DONGLE

Install batteries in the remote control and plug in the USB dongle into the codec.

Note: To maximize range of the remote, verify that the dongle and the UNITE camera USB are plugged into opposite sides of the codec.

3

COLLABORATE PRO 300

Remote control dongle only 7.1 digital L+R audio output jack

SECURITY

A lock support feature allows you to secure your codec.

4

Lock Support SD Card Slot (Do Not Use)

QUICK-START GUIDE

CONFIGURING DISPLAY SETTINGS

After all peripherals are connected to the unit, turn the unit on.

Once COLLABORATE Pro is loaded, the Setup Wizard appears. The Setup Wizard lets you configure the system name, time, and network, proxy, and Spontania settings. After the Setup Wizard is complete, using the remote control, navigate to the display settings:

Settings > System > Display

According to your monitor capabilities, set to the maximum supported resolution. If 2 monitors are connected to the unit, the display mode is automatically changed to dual mode and you can set both monitors’ resolutions.

5

COLLABORATE PRO 300

CONFIGURING AUDIO SETTINGS

The COLLABORATE Pro 300 audio input and output are set to the CHAT 150C.

Verify this in COLLABORATE

Settings > System > Audio

6

QUICK-START GUIDE

CONFIGURING NETWORK SETTINGS

Using your remote control, navigate into the network settings:

Settings > System > LAN

The COLLABORATE Pro 300 obtains its IP automatically by default from a DHCP server.

Uncheck the Obtain Address from DHCP checkbox to manually configure network settings.

7

COLLABORATE PRO 300

CLEARONE CONTACTS

Headquarters

5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116

US & Canada

Tel:

801.975.7200

TollFree:

800.945.7730

Fax:

801.303.5711

International

Tel:

+1.801.975.7200

e-mail:

global@clearone.com

Sales

Tel:

801.975.7200

e-mail:

sales@clearone.com

TechSupport

Tel:

801.974.3760

e-mail:

collaborate.support@clearone.com

8

© 2017 ClearOne, Inc. All rights reserved - http://www.clearone.com/.

Information in this document is subject to change without notice. QSG-0020-001 Revision 1.7 October 2017

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement