Tripp Lite | SRDUCTN7009 & SRDUCTN7004 | Assembly Instructions | Tripp Lite SRDUCTN7009 & SRDUCTN7004 Assembly Instructions

Tripp Lite SRDUCTN7009 & SRDUCTN7004 Assembly Instructions
Assembly Instructions
SmartRack® Wide-Rack
Air Inlet Duct Kit for Nexus 7 Series
Switches
Model: SRDUCTN7009
Pg. 2-3
Model: SRDUCTN7004
Pg. 3-4
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All Rights Reserved. All trademarks are the property of their respective owners.
1
Parts List – SRDUCTN7009
Inlet Box
Exhaust Box
Top Tray
Bottom Tray
M6 x 16 Screw (x16)
M4 Screw (x7)
M6 Cup Washer (x16)
Rear Plate (x2)
Assembly – SRDUCTN7009
1
Use two (2) M4 screws to secure the
Rear Plate to the Inlet Box and one (1)
M4 screw to secure the other Rear Plate
to the Exhaust Box.
2
Attach the Exhaust Box to the Left Rail.
3
2
Attach the Inlet Box to the Right Rail.
Assembly – SRDUCTN7009
4
5
Attach the Bottom Tray to the rail assemblies.
On the back of the unit, use four (4) M4 screws to secure
the Bottom Tray to the Inlet Box and Exhaust Box.
6
Attach the Top Tray to the rail assemblies.
Parts List – SRDUCTN7004
Inlet Box
Top Tray
M6 x 16 Screw (x8)
M4 Screw (x4)
3
M6 Cup Washer (x8)
Rear Plate
Assembly – SRDUCTN7004
1
2
Attach the Inlet Box to the Right Rail.
Attach the Top Tray to
the rail assemblies.
On the back of the unit, use four (4) M4 screws
to secure the Top Tray to the Inlet Box.
3
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
4
17-05-254 93-35FF_RevC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising