Tripp Lite | 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support | Owner's Manual | Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support Owner's Manual

Tripp Lite 4K/60 HDMI over Cat6 Extenders and Splitters, Multi-Resolution Function Support Owner's Manual
Owner’s Manual
4K/60 HDMI over Cat6 Extenders
and Splitters, Multi-Resolution
Function Support
Local Unit Models: B127P-002-H, B127P-004-H
Remote Unit Models: B127P-100-H, B127P-100-H-SR
Este manual esta disponible en español en la página de
Tripp Lite : tripplite.com/support
Ce manuel est disponible en français sur le site Web de
Tripp Lite : tripplite.com/support
Русскоязычная версия настоящего руководства представлена на
веб-сайте компании Tripp Lite по адресу: tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an
ISOBAR surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
5-082-93396C-EN.indd 1
Copyright © 2019 Tripp Lite. All rights reserved.
1
8/30/2019 9:45:20
B127P-100-H
B127P-100-H-SR
Local (L) Unit or Remote (R) Unit
L
L
R
R
External Power Supplies (0 or 1)
1
1
0
0
Mounting Hardware
Y
Y
Y
N
B127P-002-H
B127P-004-H
Package Contents
Product Features
All
• Support a maximum video resolution of 4K (3840 x 2160) @
60 Hz with 4:4:4 Chroma Subsampling
• Support up to 7.1-channel surround sound audio
• HDMI 2.0, HDCP 2.2 and HDR compatible
• Plug and play—no software or drivers required
5-082-93396C-EN.indd 2
2
8/30/2019 9:45:20
Product Features
B127P-002-H
• 2-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit
• Splits an HDMI signal into two
• Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR
receiver units to extend an HDMI signal
• Power over Cable (PoC) function to transfer power to remote receivers
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to coexist in a single application without downgrading signal quality to the
lowest resolution
• Includes mounting hardware that allows unit to be wall-mounted, rackmounted or pole-mounted
B127P-004-H
• 4-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit
• Splits an HDMI signal into four
• Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR
receiver units to extend an HDMI signal
• Power over Cable (PoC) function to transfer power to remote receivers
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to coexist in a single application without downgrading signal quality to the
lowest resolution
• Includes an additional HDMI port, which can be used to connect a
local monitor or to daisy-chain additional B127P-004-H units (up to
three units can be daisy-chained together)
• Includes mounting hardware that allows unit to be wall-mounted, rackmounted or pole-mounted
5-082-93396C-EN.indd 3
3
8/30/2019 9:45:20
Product Features
B127P-100-H
• HDMI over Cat6 Power over Cable (PoC) Remote Receiver Unit
• Works with B127P-002-H and B127P-004-H extender/splitters to
extend a 4K @ 60 Hz signal up to 125 ft. (38 m) from the source
• Built-in equalization control for video image auto-adjustment
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to
co-exist in a single application without downgrading signal quality to
the lowest resolution
• Includes mounting hardware that allows unit to be wall-mounted, rackmounted or pole-mounted
B127P-100-H-SR
• HDMI over Cat6 Power over Cable (PoC) Short Distance Remote
Receiver Unit
• Works with B127P-002-H and B127P-004-H extender/splitters to
extend a 4K @ 60 Hz signal up to 50 ft. (15 m) from the source
• Built-in equalization control for video image auto-adjustment
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to
co-exist in a single application without downgrading signal quality to
the lowest resolution
• Built-in 6 in. HDMI pigtail cable attaches directly to HDMI port at
display
Optional Accessories:
• N202-Series Cat6 24 AWG Solid Wire Patch Cables
• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables
5-082-93396C-EN.indd 4
4
8/30/2019 9:45:20
Disclaimer
Before installation, please check the following settings of your source(s)
and TV/monitor(s):
1. Set to display 60 Hz. Double-check factory settings, as default can
be set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4.
3. Verify your monitor has the HDR feature enabled. Some displays
may have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: If you wish to connect a local monitor to your installation, depending
on your TV/monitor make/model, the UHD Deep Color setting may need to be
disabled on your local TV/monitor to achieve 4K 60 Hz resolution.
5-082-93396C-EN.indd 5
5
8/30/2019 9:45:20
Mounting Instructions
(select models only)
The B127P-002-H, B127P-004-H and B127P-100-H include mounting
hardware that allows for a variety of mounting methods. The following
images illustrate how the included mounting brackets can be attached for
different installations.
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over-IP units are the same.
Wall-mount
19” Rack-mount
5-082-93396C-EN.indd 6
Pole-mount
6
8/30/2019 9:45:20
Standard Extender/Splitter Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) The installation diagram shows the B127P-004-H local transmitter unit. The
B127P-002-H installation is the same, except there are only two remote ports
and no local port monitor.
4) External power is not required for the B127P-100-H and B127P-100-H-SR units
due to Power over Cable (PoC) technology incorporated in the transmitter units.
B127P-004-H extender kit
1 Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz
2 Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz
5-082-93396C-EN.indd 7
3 Up to 15 ft. (5 m) HDMI 2.0 cable at 4K/60Hz
4 Up to 16 ft. (5 m) HDMI 1.4 cable at 1080p/60Hz
B127P-100-H-SR
B127P-100-H
B127P-100-H
B127P-100-H-SR
B127P-004-H
OPTIONAL
HDR PLAYER
LOCAL MONITOR
7
8/30/2019 9:45:20
Standard Extender/Splitter Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the B127P-002-H or B127P-004-H.
3. Optional for B127P-004-H: Using an HDMI 2.0 cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect an
HDMI monitor to the LOCAL port on the B127P-004-H unit.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5. Repeat Step 4 for each additional remote unit being connected.
6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI
port to a monitor.
7. Turn the power on to your connected TVs/monitors. The LOCAL
(orange) LED will illuminate to indicate the local port has been
connected to a display.
8. Connect the external power supply to the local transmitter unit, and
plug it into an available wall outlet or (optional) a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED on the local transmitter unit
will illuminate to indicate the unit is receiving power from the external
power supply. The POWER (green) LED on the remote receiver unit
will illuminate to indicate the unit is receiving power from the local
transmitter unit through PoC technology.
9. Turn on the power to the HDMI source. The OUTPUT (orange) LED
on the local transmitter unit illuminates to indicate a signal is being
received from the source. Additionally, the OUTPUT (orange) LED will
illuminate for each port signal connection.
5-082-93396C-EN.indd 8
8
8/30/2019 9:45:20
Standard Extender/Splitter Installation
10. The (orange) RJ45 LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from
source to display. The screen should now display on the connected
monitor(s).
Extender/Splitter Daisy-Chain
Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher-gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) Using the B127P-100-H, a 4K/60Hz signal can be extended up to 125 ft. (38 m)
from the source. Using a B127P-100-H-SR, a 4K/60Hz signal can be extended
up to 50 ft. (15 m) from the source.
5-082-93396C-EN.indd 9
9
8/30/2019 9:45:20
Extender/Splitter Daisy-Chain
Installation
1
2
3
4
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
Up to 6 ft. (1.8 m) HDMI 2.0 cable at 4K/60 Hz
HDR PLAYER
Level 1
B127P-004-H
Level 2
B127P-004-H
Level 3
B127P-004-H
OPTIONAL
LOCAL
MONITOR
5-082-93396C-EN.indd 10
10
8/30/2019 9:45:20
Extender/Splitter Daisy-Chain
Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the B127P-004-H unit.
3. Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite
P569-006-CERT or P568-006-2A cables), connect the LOCAL port on
the B127P-004-H to the INPUT port on a second B127P-004-H unit.
4. Repeat step 3 if connecting a third B127P-004-H unit.
Note: Only three levels of splitters can be cascaded.
5. Optional: Using an HDMI 2.0 cable (such as Tripp Lite
P569-XXX-CERT or P568-XXX-2A Series cables), connect a local
monitor to the LOCAL HDMI port of the last B127P-004-H unit in the
installation.
6. Using Cat6 cable, connect one of the RJ45 output ports on the
local transmitter units to the RJ45 input port on a B127P-100-H or
B127P-100-H-SR remote receiver unit.
7. Repeat step 6 for each additional remote unit being connected.
8. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the B127P-100-H or
B127P-100-H-SR to a display.
9. Repeat step 8 for each additional monitor you are connecting to a
remote receiver unit.
10. Turn on the power to all your connected displays.
11. Connect the external power supply to the local transmitter unit and
plug it into an available wall outlet or (optional) a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED will illuminate to indicate the
unit is receiving power from the external power supply.
5-082-93396C-EN.indd 11
11
8/30/2019 9:45:21
Extender/Splitter Daisy-Chain
Installation
12. Repeat step 11 for each additional B127P-004-H unit in the daisy
chain.
13. B127P-100-H and B127P-100-H-SR: The green and orange LEDs
will illuminate, with the green LED indicating the unit is receiving
power from the extender/splitter, and the orange LED indicating the
unit is connected to a powered ON local unit via Cat6 cable.
14. Turn on the power to the HDMI source. The orange RJ45 LEDs will
illuminate on the B127P-004-H to indicate the unit is receiving
a signal from the source. The screen should now display on the
connected monitors.
5-082-93396C-EN.indd 12
12
8/30/2019 9:45:21
Troubleshooting
1. Using a splitter, if one display’s color is abnormal, set the player’s
deep color setting to “turn off.”
2. When source is 4K/60 4:2:2 HDR, the output can’t display
1080p/60Hz quality.
If unable to receive an acceptable image after following the installation
instructions, try the following troubleshooting tips:
Resolution Comparison Tables
Situation 1
Situation 2
SOURCE
4K/60Hz
5-082-93396C-EN.indd 13
Situation 3
Situation 4
Situation 5
Situation 6
Port
1
2-4
1
2-4
1
2-4
1
2-4
1
2-4
1
2-4
Connect TV
4K/60Hz
4K/60Hz
4K/60Hz
4K/30Hz
4K/60Hz
1080p/60Hz
4K/30Hz
4K/30Hz
4K/30Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
Real Resolution
4K/60Hz
4K/60Hz
4K/60Hz
1080p/60Hz
4K/60Hz
1080p/60Hz
4K/30Hz
4K/30Hz
4K/30Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
13
8/30/2019 9:45:21
Troubleshooting
Situation 1
Situation 2
SOURCE
4K/30Hz
Situation 3
Situation 4
Situation 5
Situation 6
Situation 1
Situation 2
SOURCE
1080P/60Hz
5-082-93396C-EN.indd 14
Situation 3
Situation 4
Situation 5
Situation 6
Port
1
2-4
1
2-4
1
2-4
1
2-4
1
2-4
1
2-4
Connect TV
4K/60Hz
4K/60Hz
4K/60Hz
4K/30Hz
4K/60Hz
1080p/60Hz
4K/30Hz
4K/30Hz
4K/30Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
Real Resolution
4K/30Hz
4K/30Hz
4K/30Hz
4K/30Hz
4K/30Hz
1080p/60Hz
4K/30Hz
4K/30Hz
4K/30Hz
1080p/30Hz
1080p/60Hz
1080p/60Hz
Port
1
2-4
1
2-4
1
2-4
1
2-4
1
2-4
1
2-4
Connect TV
4K/60Hz
4K/60Hz
4K/60Hz
4K/30Hz
4K/60Hz
1080p/60Hz
4K/30Hz
4K/30Hz
4K/30Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
Real Resolution
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/60Hz
1080p/30Hz
1080p/60Hz
1080p/60Hz
14
8/30/2019 9:45:21
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and
workmanship for a period of one (1) year from the date of initial purchase.
TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you
must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE
or an authorized TRIPP LITE service center with transportation charges prepaid and
must be accompanied by a brief description of the problem encountered and proof
of date and place of purchase. This warranty does not apply to equipment which
has been damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost
profits or revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
5-082-93396C-EN.indd 15
15
8/30/2019 9:45:21
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes
waste
WARNING
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to
change without notice. Photos and illustrations may differ slightly from actual
products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
5-082-93396C-EN.indd 16
16
19-05-082 93-396C_RevA
8/30/2019 9:45:21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising