Tripp Lite | B126-1A1-U-MCRO | Owner's Manual | Tripp Lite B126-1A1-U-MCRO Owner's Manual

Tripp Lite B126-1A1-U-MCRO Owner's Manual
Owner’s Manual
Micro HDMI to HDMI over
Cat5 Active Extender
Model: B126-1A1-U-MCRO
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
15-10-238-933517-EN.indd 1
Copyright © 2015 Tripp Lite. All rights reserved.
1
11/9/2015 10:24:08 AM
Product Features
• Extend a 1080p Micro HDMI audio/video signal to an HDMI monitor up to
125 ft. from the source
• Additional HDMI port allows connection of a local monitor
• 3D & HDCP compliant
• Built-in equalization control to adjust the video image
• USB Micro-B ports supply power to the transmitter and receiver units;
no external power supplies required
• Supports stereo audio
• Compatible with all operating systems
• No software or drivers required
Package Includes
• Transmitter and Receiver Units
• (x2) USB Micro-B Cables – 3 ft.
• Screwdriver for Equalization Adjustment
• Owner’s Manual
Optional Accessories
• N202-Series Cat6 24 AWG Solid Wire Patch Cables
• P568-Series High Speed HDMI Cables
• UR05C-Series USB Micro-B Charge-Only Cables
• U280-002-W12 2-Port USB Wall Charger
• UAC-1B 1-Port USB Wall Charger
System Requirements
• Laptop, Ultrabook™, tablet or other source with a Micro HDMI output port
• Display with an HDMI port
15-10-238-933517-EN.indd 2
2
11/9/2015 10:24:08 AM
Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6
cable must be used. The use of stranded wire Cat5e/6 cable or cable with a
gauge size higher than 24 AWG will result in shorter extension distance. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
3. Make sure that the power to all devices you are connecting is turned off prior to
installation.
3
2
6
4
LAPTOP
COMPUTER
1
24 AWG SOLID-WIRE
CAT5/6 CABLE
5
HDMI DISPLAY
Up to 125 ft. at 1080p
1. Connect the built-in Micro HDMI cable of the transmitter unit to the
Micro HDMI source.
2. Optional: Connect an HDMI monitor to the LOCAL port on the
B126-1A1-U-MCRO transmitter using a Tripp Lite P568-Series
HDMI Cable.
3. Connect the included USB Micro-B Cable between the transmitter unit
and a USB port on the source or a USB wall outlet.
4. Connect the RJ45 port on the transmitter to the RJ45 port on the
receiver using Cat5e/6 cable.
Note: See the installation diagram for maximum extension distance and video
resolutions.
5. Connect the built-in HDMI cable of the receiver unit to an HDMI monitor
input port.
6. Connect the included USB Micro-B cable between the receiver unit and
a USB port on the display or a USB wall outlet.
3
15-10-238-933517-EN.indd 3
11/9/2015 10:24:08 AM
Installation
7. Turn on the power to the Micro HDMI source and HDMI display. The
green RJ45 LEDs on the transmitter and receiver units will illuminate
to indicate they are receiving power. The orange RJ45 LEDs on the
transmitter and receiver units will illuminate to indicate they are
receiving a signal from the source.
8. If necessary, adjust the Equalization control on the receiver unit to
improve the video image.
Note: An improper Equalization setting can cause the monitor not to display a
picture at all. Try each Equalization setting until an acceptable image is displayed.
Troubleshooting
If you are unable to get an acceptable image after following the installation
instructions, try the troubleshooting tips below.
1. Are the USB Micro-B cables that came with the product connected
and plugged into a working power source? For the product to
function properly, the transmitter and receiver must be connected to and
receiving power from the USB Micro-B cables.
2. Was the power to the Micro HDMI source turned off prior to
installation? If not, restart.
3. What resolution are you trying to reach? See the Product Features
and Installation sections in this manual for details on maximum
distance and resolution. The shorter the extension distance, the higher
the resolution you will be able to obtain. If you are not able to get an
acceptable image, try lowering your computer’s video resolution or
adjusting the refresh rate.
4. What type of cabling are you using? Inferior cabling can result in poor
performance, so it is important you use cables that can support the
video resolution you are trying to obtain. To achieve maximum distance
and resolution, 24 AWG solid-wire UTP cable (such as Tripp Lite’s N202Series cables) must be used.
15-10-238-933517-EN.indd 4
4
11/9/2015 10:24:08 AM
Troubleshooting
5. Test your cables to ensure they are working properly. For example,
connect your Cat5e/6 cable between a computer and a network to verify
that it establishes a network connection.
6. Do you have any patch panels or other devices in between the
transmitter and receiver units? Tripp Lite’s Micro HDMI to HDMI
over Cat5 extender kit was designed to be connected directly from the
transmitter to the receiver via UTP cable. The more connection points
that are between the source and the remote monitor, the more likely
signal degradation will occur, causing poor performance. If you have a
patch panel or other device in between, it should be removed from the
installation.
7. Do you have a splitter, switch or other device in between the
computer and transmitter, or in between the receiver and display?
Tripp Lite’s Micro HDMI to HDMI over Cat5 extender kit was designed for
the transmitter to connect directly with the source computer, and for the
receiver to connect directly to the display. If you have a splitter, switch,
or other device in between, it should be removed from the installation.
8. Check your cabling for any damage that may have occurred during
installation. If a cable connector is loosened from pulling through
ceilings/walls or the cable jacket is damaged, causing the wiring to be
exposed, you will not be able to achieve maximum performance.
9. Are the transmitter and/or receiver units located in an area
that exposes them to elevated temperatures? If the product is
overheating, it will not function properly.
15-10-238-933517-EN.indd 5
5
11/9/2015 10:24:08 AM
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period
of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited
to repairing or replacing (at its sole option) any such defective products. To obtain service under
this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized
TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This warranty does
not apply to equipment, which has been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
15-10-238-933517-EN.indd 6
6
11/9/2015 10:24:08 AM
Warranty and Product Registration
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the
user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical and electronic equipment from Tripp Lite they
are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending
on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice.
15-10-238-933517-EN.indd 7
7
11/9/2015 10:24:08 AM
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
15-10-238-933517-EN.indd 8
8
15-10-238 • 93-3517_revA
11/9/2015 10:24:12 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising