Tripp Lite | DDR1026MQ | Owner's Manual | Tripp Lite DDR1026MQ Owner's Manual

Tripp Lite DDR1026MQ Owner's Manual
Owner’s Manual
Quad Flat Screen Desk Stand
MODEL: DDR1026MQ
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
75x75
100x100
26”
MAX
13.6 kg x 4
(30 lb.) x 4
MAX
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании
Tripp Lite по адресу: www.tripplite.com
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp1Lite. All rights reserved.
17-06-326-93345F-EN.indd 1
6/23/2017 10:50:49 AM
NOTE: Read the entire instruction manual before you start installation and assembly.
WARNING
• Please read the entire instruction manual before you start installation and
assembly. If you have questions about any of the instructions or warnings, please
contact Tripp Lite.
• This desk stand is designed to be installed and used only as specified in this
manual. Improper installation of this product may cause damage or serious
injury.
• Be sure the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position
the equipment.
• Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage
to the items and reduce their holding power.
• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.
Warranty & Product Registration
5-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects
in material and workmanship for a period of 5 years from the date of initial purchase. If the product should
prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole
discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE,
ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY
SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES,
INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL
DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate
or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes
no representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
2
17-06-326-93345F-EN.indd 2
6/23/2017 10:50:50 AM
Parts List
IMPORTANT:
Before installation, be sure you have received all the parts listed below. If any parts are
missing or faulty, contact Tripp Lite for replacements.
Adapter Bracket Assembly (x4)
Horizontal Support Assembly (x2)
Connector (x1)
Bottom Pole (x1)
Top Pole (x1)
Base (x1)
Package M
M4X14 (x16)
M5X14 (x16)
D5 Washer (x16)
Package P
3 mm Hex Key (x1)
4 mm Hex Key (x1)
Knob (x2)
3
17-06-326-93345F-EN.indd 3
6/23/2017 10:50:50 AM
1. Assemble the Pole to the Base
Screw the pole into the threaded hole
of the base.
Tighten
3 mm Hex Key
Tighten all screws to secure.
4
17-06-326-93345F-EN.indd 4
6/23/2017 10:50:51 AM
1. Assemble the Pole to the Base
Adjust Height
Collar
Loosen
3 mm Hex Key
Adjust the collar to the
desired height.
Tighten
3 mm Hex Key
5
17-06-326-93345F-EN.indd 5
6/23/2017 10:50:52 AM
2. Install the Horizontal Support Assembly
Loosen
4 mm Hex Key
Insert the Horizontal Support
Assembly into the Bottom Pole
until it touches the Collar.
Collar
Tighten
6
17-06-326-93345F-EN.indd 6
6/23/2017 10:50:53 AM
2. Install the Horizontal Support Assembly
Insert the Horizontal Support
Assembly into the Top Pole until it
touches the Collar.
Knob
Knob
Tighten both Knobs to
secure the Horizontal
Support Assemblies.
7
17-06-326-93345F-EN.indd 7
6/23/2017 10:50:54 AM
3. Separate the Adapter Bracket Assembly
Loosen and remove the
Knob to separate the VESA
plate from the adapter
bracket assembly.
4. Install the VESA Plates
Top
D5 Washer
4 mm Hex
Key
M4X14 or
M5X14
It may be necessary to slightly
loosen or tighten the adjustment
screw depending on the weight
of display installed.
Attach the display to the VESA plate with the appropriate included screws.
Do not over-tighten screws.
8
17-06-326-93345F-EN.indd 8
6/23/2017 10:50:54 AM
5. Install the Displays
Tighten
WARNING: Always ensure all four monitors
face forward. Turning the monitors to face
backward may cause the unit to tip over.
Attach both displays to the Horizontal Support Assembly simultaneously using the Knobs and washers. Tighten
both Knobs to secure the displays. Make sure the displays are safely secured before releasing. Repeat step for
the second set of displays to the top Horizontal Support Assembly.
6. Cable Management
Use the clip for routing the cables.
Note: Leave slack in the cables for arm movement.
9
17-06-326-93345F-EN.indd 9
6/23/2017 10:50:55 AM
7. Adjustment
Knob
10
17-06-326-93345F-EN.indd 10
6/23/2017 10:50:56 AM
7. Adjustment
Adjust to the desired position or tilt.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please visit www.tripplite.com/support if you have any questions.
11
17-06-326-93345F-EN.indd 11
6/23/2017 10:50:57 AM
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
12
17-06-326-93345F-EN.indd 12
17-06-326 93-345F_RevB
6/23/2017 10:50:58 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising