Tripp Lite DMCS60100XX Owner's Manual
Tripp Lite DMCS60100XX is a heavy-duty mobile flat-panel floor stand designed to securely hold TVs, DVD players, and cameras, with a maximum weight capacity of 220 lbs for the TV and 11 lbs each for the DVD player and camera. It features adjustable height columns, a universal plate for easy display mounting, a DVD shelf, and a camera shelf. The cable management system helps keep cords organized and out of the way. This versatile stand is ideal for use in a variety of settings, including home entertainment systems, offices, and classrooms.
Advertisement
Advertisement
Owner’s Manual
Heavy-Duty Mobile Flat-Panel Floor Stand
Model: DMCS60100XX
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
200 x 200 / 300 x 300 / 400 x 200 / 400 x 400 / 600 x 400 / 800 x 400 / 800 x 600 / 1000 x 600
100” MAX
TV 220 lb.
(100 kg) MAX DVD 11 lb.
(5 kg) MAX CAMERA 11 lb.
(5 kg) MAX
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
1
18-03-071-93380E-EN.indd 1 3/28/2018 9:50:20 AM
NOTE:
Read the entire instruction manual before you start assembly and installation.
WARNING
• Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support • This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
• This product should only be installed by someone of good mechanical ability, with basic building experience and a full understanding of this instruction manual.
• Make sure that the mounting surface can safely support the combined load of the equipment and all attached hardware and components. • Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not over-tighten. Over-tightening screws can damage the items, greatly reducing their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Warranty & Product Registration
5-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
2
18-03-071-93380E-EN.indd 2 3/28/2018 9:50:20 AM
Component Checklist
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service.
Middle Base (x1) Left Leg (x1) Right Leg (x1) Left Cover (x1) Right Cover (x1) Universal Plate (x1) Left Column (x1) Plastic Handle (x2) Right Column (x1) Left Adapter Bracket (x1) Right Adapter Bracket (x1) Top Cover (x2) DVD Shelf (x1) Connecting Plate (x1)
Package P
Camera Shelf (x1) Support Bar (x1) Knob (x2) M6x25 Philips Rounded Head (x2) M6x16 (x4) M4x6 (x3) M4x6 (x2) M6x25 Hex Socket Head (x2) M6x14 (x6)
Package M
M8x25 (x8) M6x25 Hex Rounded Head (x2) Hex Key (x1) Wrench (x1) M5 x 14 (x4) M6 x 14 x4) M6 x 30 (x4) M8 x 30 (x4) M8 x 50 (x4) Washer (x4) Small Spacer (x8) Big Spacer (x8)
3
18-03-071-93380E-EN.indd 3 3/28/2018 9:50:20 AM
1. Assembling the Base
Middle Base Left Leg M6x16 Right Leg Hex Key Wrench • Insert the right leg into the base. Align the holes in the right leg to the holes in the base. Secure with the screws. Repeat this step for the left leg.
• Each caster can be adjusted independently for fine tuning. Slightly turn the nut to lower or raise the base.
2. Adjust Column Height
CAUTION: Hold the inner column when loosening the screws to adjust height.
Hex Key Hex Key Adjust to the desired height, then tighten all screws.
Right Column Repeat this step for the left column.
Note:
Make sure both columns are at the same height using the height indicator as guide.
4
18-03-071-93380E-EN.indd 4 3/28/2018 9:50:23 AM
3. Attach Columns to Base
During this step, the columns are not secured to the base with screws.
Be careful not to knock the columns over.
Plastic Handle Left Column Right Column 18-03-071-93380E-EN.indd 5
5
3/28/2018 9:50:25 AM
4. Attach Universal Plate to Columns
M6x14 Universal Plate Universal Plate Support Insert the Universal Plate’s Supports into the column along the column rails. Tighten all screws with a suitable Philips screwdriver.
Top Cover
5. Secure Columns to Base
Left Cover 18-03-071-93380E-EN.indd 6
6
Right Cover Using the Hex Key, tighten the screws to secure the columns to the base.
M8x25 Hex Key 3/28/2018 9:50:26 AM
5. Secure Columns to Base
Tighten the safety screws.
M6x25 Philips Rounded Head
6. Assemble the DVD Shelf
Knob M6x25 Hex Rounded Head M6x14 Support Bar
7
18-03-071-93380E-EN.indd 7 3/28/2018 9:50:28 AM
7. Attach DVD Shelf to Columns
Support Block M6x25 Hex Socket Head Hex Key Hex Key Hex Key Use the Hex Key and screws to secure the DVD Shelf Assembly to the Columns’ Support Blocks.
Adjust the Columns to the desired height before installing the display.
8. Attach Adapter Brackets to Display
8.1 For Flat Back Screens
TV TV TV Washer M5x14 M6x14 18-03-071-93380E-EN.indd 8
8
3/28/2018 9:50:29 AM
8. Attach Adapter Brackets to Display
8.2 For Recessed Back Screens or Access to A/V Inputs
Do not over-tighten screws.
or
M6x30 M8x30 Washer Small Spacer M6x30 M8x30 Washer
or
Big Spacer M6x30 M8x30 M8x50 M8x50 Big Spacer Washer
or
Small Spacer Big Spacer • Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
Washer
or
Big Spacer Washer
or
Small Spacer Big Spacer M8x50 Washer Small Spacer • Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.
9. Hang the Display onto the Universal Plate
Make sure the display is correctly mounted before releasing the display.
• Hook the adapter brackets (attached to the display) onto the universal plate.
• Rotate the bottom screws counterclockwise to lock.
9
• Rotate the bottom screws clockwise to unlock.
• Use a padlock (not included) to prevent display from being stolen.
18-03-071-93380E-EN.indd 9 3/28/2018 9:50:30 AM
10. Cable Management
C Route the power and connection cables through the openings on the Left and Right Columns.
11. Assemble the Camera Shelf
M4x6 Camera Shelf Connecting Plate 18-03-071-93380E-EN.indd 10 Use a Philips screwdriver and screws to attach the Camera Shelf to the Connecting Plate.
10
M4x6 3/28/2018 9:50:31 AM
12. Attach the Camera Shelf Assembly to the Universal Plate
Remove Screws Insert Removed Screws to attach Connecting Plate Remove the Universal Plate’s two rear screws, then attach the Camera Shelf Assembly using the same screws just removed. Adjust the Camera Shelf Assembly to the desired height, then secure by tightening the screws with a Philips screwdriver.
18-03-071-93380E-EN.indd 11
11
3/28/2018 9:50:33 AM
13. Adjustment
+5° –10°
1200 mm 1250 mm 1300 mm 1350 mm 1400 mm 1450 mm 1500 mm 1550 mm 1600 mm 1650 mm TV panel center height measured from floor.
Support Block Use the Hex Key to loosen the screws on both support blocks. Adjust the DVD shelf to the desired height, then tighten screws to secure.
Hex Key
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• For any additional questions, visit www.tripplite.com/support.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 12
18-03-071 93-380E_RevA 18-03-071-93380E-EN.indd 12 3/28/2018 9:50:33 AM

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Holds most flat or curved 60-100 in. displays up to 220 lb. (99.8 kg)
- Accommodates interactive whiteboards, including Promethean models
- Height adjustable from 47 to 65 in. for best viewing
- Locking swivel casters easily roll over carpet
- Shelves hold a webcam and a Blu-ray player or laptop