Tripp Lite | NPOE-30W-1G | Owner's Manual | Tripp Lite NPOE-30W-1G Owner's Manual

Tripp Lite NPOE-30W-1G Owner's Manual
Owner’s Manual
1-Port Gigabit High-Power
PoE+ Midspan Injector
Model: NPOE-30W-1G
Este manual esta disponible en español en la página de Tripp Lite:
www.tripplite.com/support
Ce manuel est disponible en français sur le site Web de Tripp Lite :
www.tripplite.com/support
Русскоязычная версия настоящего руководства
представлена на веб-сайте компании Tripp Lite по адресу:
www.tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
All trademarks and registered trademarks are the property of their respective owners.
08-333-933733-EN.indd 1
1
8/29/2019 8:41:25 A
Package Contents
• NPOE-30W-1G Gigabit High-Power PoE+ Injector
• C5 to NEMA 5-15P Power Cable – 2 ft.
• Owner’s Manual
Product Features
• Save time and money by delivering up to 10/100/1000 Mbps of data and
up to 30W of power via existing network cables.
• Supports distances up to 100 m (328 ft.).
• Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
(Wireless LAN access points and bridges, VoIP, IP surveillance cameras,
etc.).
• Supports IEEE 802.3at/af detection and short-circuit, overload and
high-voltage protection.
• Simple plug-and-play design with no configuration required.
• Fanless design ideal for silent operation.
• Flexible design allows for either desktop or surface-mount use.
Installation
1. Using existing or newly-run Cat5e/6 cable, connect a LAN port on a nonPoE switch or network jack to the Data/IN port on the injector.
2. Connect any IEEE 802.3af/at-compliant PoE device to the P+D/OUT port
on the injector.
3. Use the included C5 to NEMA 5-15P power cable to connect the injector
to an AC outlet.
08-333-933733-EN.indd 2
2
8/29/2019 8:41:25 A
Specifications
IEEE Standards
IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High-Power PoE+ Power over Ethernet)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (Flow control, for full duplex mode)
Media Support
100Base-TX Cat5 UTP/STP RJ45, 8 pin
1000Base-T Cat5e/6 UTP/STP Rj45, 8 pin
Ports
One RJ45 10/100/1000 Mbps Input port
One RJ45 10/100/1000 Mbps Data + Power Output port
Protection Functions
Short circuit protection for short GND
Overload protections for currents over 0.6A
PoE Pinout
IEEE 802.3af/at Standard Mode B
Pin 4: DC (+)
Pin 5: DC (+)
Pin 7: DC (-)
Pin 7: DC (-)
Power
Input: 100-240V AC, 50/60 Hz
Max Power Consumption: 35W
LED
Power (Green), Active (Green)
Environmental
Operating Temperature: 32° F to 104° F (0° C to 40° C)
Storage Temperature: -4° to 176° F (-20° to 80° C)
Operating Humidity: 5% to 90% RH, Non-Condensing
Unit
Dimensions: 5.35 (L) x 2.64 (W) x 1.34 (H) [in.]
Weight: 0.44 lb. (0.2 kg)
08-333-933733-EN.indd 3
3
8/29/2019 8:41:25 A
Warranty and Product Registration
3-Year Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase.
Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this
warranty, you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be
returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of
the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs,
such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties,
or otherwise.
Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The
series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance
information for this product, always refer to the series number. The series number should not be confused with the marketing name or model number
of the product.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and
electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
08-333-933733-EN.indd 4
4
19-08-333 93-3733_RevC
8/29/2019 8:41:25 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising